Struct nalgebra::geometry::Point

#[repr(C)]pub struct Point<N: Scalar, D: DimName> where
    DefaultAllocator: Allocator<N, D>,  {
    pub coords: VectorN<N, D>,
}

A point in a n-dimensional euclidean space.

Fields

coords: VectorN<N, D>

The coordinates of this point, i.e., the shift from the origin.

Implementations

impl<N: Scalar, D: DimName> Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

pub fn to_homogeneous(&self) -> VectorN<N, DimNameSum<D, U1>> where
    N: One,
    D: DimNameAdd<U1>,
    DefaultAllocator: Allocator<N, DimNameSum<D, U1>>, 

Converts this point into a vector in homogeneous coordinates, i.e., appends a 1 at the end of it.

This is the same as .into().

Example

let p = Point2::new(10.0, 20.0);
assert_eq!(p.to_homogeneous(), Vector3::new(10.0, 20.0, 1.0));

// This works in any dimension.
let p = Point3::new(10.0, 20.0, 30.0);
assert_eq!(p.to_homogeneous(), Vector4::new(10.0, 20.0, 30.0, 1.0));

pub fn from_coordinates(coords: VectorN<N, D>) -> Self

👎 Deprecated:

Use Point::from(vector) instead.

Creates a new point with the given coordinates.

pub fn len(&self) -> usize

The dimension of this point.

Example

let p = Point2::new(1.0, 2.0);
assert_eq!(p.len(), 2);

// This works in any dimension.
let p = Point3::new(10.0, 20.0, 30.0);
assert_eq!(p.len(), 3);

pub fn stride(&self) -> usize

👎 Deprecated:

This methods is no longer significant and will always return 1.

The stride of this point. This is the number of buffer element separating each component of this point.

pub fn iter(
    &self
) -> MatrixIter<N, D, U1, <DefaultAllocator as Allocator<N, D>>::Buffer>

Iterates through this point coordinates.

Example

let p = Point3::new(1.0, 2.0, 3.0);
let mut it = p.iter().cloned();

assert_eq!(it.next(), Some(1.0));
assert_eq!(it.next(), Some(2.0));
assert_eq!(it.next(), Some(3.0));
assert_eq!(it.next(), None);

pub unsafe fn get_unchecked(&self, i: usize) -> &N

Gets a reference to i-th element of this point without bound-checking.

pub fn iter_mut(
    &mut self
) -> MatrixIterMut<N, D, U1, <DefaultAllocator as Allocator<N, D>>::Buffer>

Mutably iterates through this point coordinates.

Example

let mut p = Point3::new(1.0, 2.0, 3.0);

for e in p.iter_mut() {
    *e *= 10.0;
}

assert_eq!(p, Point3::new(10.0, 20.0, 30.0));

pub unsafe fn get_unchecked_mut(&mut self, i: usize) -> &mut N

Gets a mutable reference to i-th element of this point without bound-checking.

pub unsafe fn swap_unchecked(&mut self, i1: usize, i2: usize)

Swaps two entries without bound-checking.

impl<N: Scalar + SimdPartialOrd, D: DimName> Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

pub fn inf(&self, other: &Self) -> Point<N, D>

Computes the infimum (aka. componentwise min) of two points.

pub fn sup(&self, other: &Self) -> Point<N, D>

Computes the supremum (aka. componentwise max) of two points.

pub fn inf_sup(&self, other: &Self) -> (Point<N, D>, Point<N, D>)

Computes the (infimum, supremum) of two points.

impl<N: Scalar, D: DimName> Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

pub unsafe fn new_uninitialized() -> Self

Creates a new point with uninitialized coordinates.

pub fn origin() -> Self where
    N: Zero, 

Creates a new point with all coordinates equal to zero.

Example

// This works in any dimension.
// The explicit crate::<f32> type annotation may not always be needed,
// depending on the context of type inference.
let pt = Point2::<f32>::origin();
assert!(pt.x == 0.0 && pt.y == 0.0);

let pt = Point3::<f32>::origin();
assert!(pt.x == 0.0 && pt.y == 0.0 && pt.z == 0.0);

pub fn from_slice(components: &[N]) -> Self

Creates a new point from a slice.

Example

let data = [ 1.0, 2.0, 3.0 ];

let pt = Point2::from_slice(&data[..2]);
assert_eq!(pt, Point2::new(1.0, 2.0));

let pt = Point3::from_slice(&data);
assert_eq!(pt, Point3::new(1.0, 2.0, 3.0));

pub fn from_homogeneous(v: VectorN<N, DimNameSum<D, U1>>) -> Option<Self> where
    N: Scalar + Zero + One + ClosedDiv,
    D: DimNameAdd<U1>,
    DefaultAllocator: Allocator<N, DimNameSum<D, U1>>, 

Creates a new point from its homogeneous vector representation.

In practice, this builds a D-dimensional points with the same first D component as v divided by the last component of v. Returns None if this divisor is zero.

Example

let coords = Vector4::new(1.0, 2.0, 3.0, 1.0);
let pt = Point3::from_homogeneous(coords);
assert_eq!(pt, Some(Point3::new(1.0, 2.0, 3.0)));

// All component of the result will be divided by the
// last component of the vector, here 2.0.
let coords = Vector4::new(1.0, 2.0, 3.0, 2.0);
let pt = Point3::from_homogeneous(coords);
assert_eq!(pt, Some(Point3::new(0.5, 1.0, 1.5)));

// Fails because the last component is zero.
let coords = Vector4::new(1.0, 2.0, 3.0, 0.0);
let pt = Point3::from_homogeneous(coords);
assert!(pt.is_none());

// Works also in other dimensions.
let coords = Vector3::new(1.0, 2.0, 1.0);
let pt = Point2::from_homogeneous(coords);
assert_eq!(pt, Some(Point2::new(1.0, 2.0)));

impl<N: Scalar> Point<N, U1> where
    DefaultAllocator: Allocator<N, U1>, 

pub fn new(x: N) -> Self

Initializes this point from its components.

Example

let p = Point1::new(1.0);
assert!(p.x == 1.0);

impl<N: Scalar> Point<N, U2> where
    DefaultAllocator: Allocator<N, U2>, 

pub fn new(x: N, y: N) -> Self

Initializes this point from its components.

Example

let p = Point2::new(1.0, 2.0);
assert!(p.x == 1.0 && p.y == 2.0);

impl<N: Scalar> Point<N, U3> where
    DefaultAllocator: Allocator<N, U3>, 

pub fn new(x: N, y: N, z: N) -> Self

Initializes this point from its components.

Example

let p = Point3::new(1.0, 2.0, 3.0);
assert!(p.x == 1.0 && p.y == 2.0 && p.z == 3.0);

impl<N: Scalar> Point<N, U4> where
    DefaultAllocator: Allocator<N, U4>, 

pub fn new(x: N, y: N, z: N, w: N) -> Self

Initializes this point from its components.

Example

let p = Point4::new(1.0, 2.0, 3.0, 4.0);
assert!(p.x == 1.0 && p.y == 2.0 && p.z == 3.0 && p.w == 4.0);

impl<N: Scalar> Point<N, U5> where
    DefaultAllocator: Allocator<N, U5>, 

pub fn new(x: N, y: N, z: N, w: N, a: N) -> Self

Initializes this point from its components.

Example

let p = Point5::new(1.0, 2.0, 3.0, 4.0, 5.0);
assert!(p.x == 1.0 && p.y == 2.0 && p.z == 3.0 && p.w == 4.0 && p.a == 5.0);

impl<N: Scalar> Point<N, U6> where
    DefaultAllocator: Allocator<N, U6>, 

pub fn new(x: N, y: N, z: N, w: N, a: N, b: N) -> Self

Initializes this point from its components.

Example

let p = Point6::new(1.0, 2.0, 3.0, 4.0, 5.0, 6.0);
assert!(p.x == 1.0 && p.y == 2.0 && p.z == 3.0 && p.w == 4.0 && p.a == 5.0 && p.b == 6.0);

impl<N: Scalar, D: DimName> Point<N, D> where
    DefaultAllocator: Allocator<N, D>,
    D::Value: Cmp<U0, Output = Greater>, 

pub fn xx(&self) -> Point2<N>

Builds a new point from components of self.

pub fn xxx(&self) -> Point3<N>

Builds a new point from components of self.

impl<N: Scalar, D: DimName> Point<N, D> where
    DefaultAllocator: Allocator<N, D>,
    D::Value: Cmp<U1, Output = Greater>, 

pub fn xy(&self) -> Point2<N>

Builds a new point from components of self.

pub fn yx(&self) -> Point2<N>

Builds a new point from components of self.

pub fn yy(&self) -> Point2<N>

Builds a new point from components of self.

pub fn xxy(&self) -> Point3<N>

Builds a new point from components of self.

pub fn xyx(&self) -> Point3<N>

Builds a new point from components of self.

pub fn xyy(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yxx(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yxy(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yyx(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yyy(&self) -> Point3<N>

Builds a new point from components of self.

impl<N: Scalar, D: DimName> Point<N, D> where
    DefaultAllocator: Allocator<N, D>,
    D::Value: Cmp<U2, Output = Greater>, 

pub fn xz(&self) -> Point2<N>

Builds a new point from components of self.

pub fn yz(&self) -> Point2<N>

Builds a new point from components of self.

pub fn zx(&self) -> Point2<N>

Builds a new point from components of self.

pub fn zy(&self) -> Point2<N>

Builds a new point from components of self.

pub fn zz(&self) -> Point2<N>

Builds a new point from components of self.

pub fn xxz(&self) -> Point3<N>

Builds a new point from components of self.

pub fn xyz(&self) -> Point3<N>

Builds a new point from components of self.

pub fn xzx(&self) -> Point3<N>

Builds a new point from components of self.

pub fn xzy(&self) -> Point3<N>

Builds a new point from components of self.

pub fn xzz(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yxz(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yyz(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yzx(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yzy(&self) -> Point3<N>

Builds a new point from components of self.

pub fn yzz(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zxx(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zxy(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zxz(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zyx(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zyy(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zyz(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zzx(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zzy(&self) -> Point3<N>

Builds a new point from components of self.

pub fn zzz(&self) -> Point3<N>

Builds a new point from components of self.

Trait Implementations

impl<N: Scalar + AbsDiffEq, D: DimName> AbsDiffEq<Point<N, D>> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>,
    N::Epsilon: Copy, 

type Epsilon = N::Epsilon

Used for specifying relative comparisons.

fn default_epsilon() -> Self::Epsilon

The default tolerance to use when testing values that are close together.

fn abs_diff_eq(&self, other: &Self, epsilon: Self::Epsilon) -> bool

A test for equality that uses the absolute difference to compute the approximate equality of two numbers.

fn abs_diff_ne(&self, other: &Rhs, epsilon: Self::Epsilon) -> bool

The inverse of ApproxEq::abs_diff_eq.

impl<'a, 'b, N, D1: DimName, D2: Dim, SB: Storage<N, D2>> Add<&'b Matrix<N, D2, U1, SB>> for &'a Point<N, D1> where
    N: Scalar + ClosedAdd,
    DefaultAllocator: Allocator<N, D1, U1> + Allocator<N, D2, U1> + SameShapeAllocator<N, D1, U1, D2, U1>,
    ShapeConstraint: SameNumberOfRows<D1, D2, Representative = D1> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D1>

The resulting type after applying the + operator.

fn add(self, right: &'b Vector<N, D2, SB>) -> Self::Output

Performs the + operation.

impl<'b, N, D1: DimName, D2: Dim, SB: Storage<N, D2>> Add<&'b Matrix<N, D2, U1, SB>> for Point<N, D1> where
    N: Scalar + ClosedAdd,
    DefaultAllocator: Allocator<N, D1, U1> + Allocator<N, D2, U1> + SameShapeAllocator<N, D1, U1, D2, U1>,
    ShapeConstraint: SameNumberOfRows<D1, D2, Representative = D1> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D1>

The resulting type after applying the + operator.

fn add(self, right: &'b Vector<N, D2, SB>) -> Self::Output

Performs the + operation.

impl<'a, N, D1: DimName, D2: Dim, SB: Storage<N, D2>> Add<Matrix<N, D2, U1, SB>> for &'a Point<N, D1> where
    N: Scalar + ClosedAdd,
    DefaultAllocator: Allocator<N, D1, U1> + Allocator<N, D2, U1> + SameShapeAllocator<N, D1, U1, D2, U1>,
    ShapeConstraint: SameNumberOfRows<D1, D2, Representative = D1> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D1>

The resulting type after applying the + operator.

fn add(self, right: Vector<N, D2, SB>) -> Self::Output

Performs the + operation.

impl<N, D1: DimName, D2: Dim, SB: Storage<N, D2>> Add<Matrix<N, D2, U1, SB>> for Point<N, D1> where
    N: Scalar + ClosedAdd,
    DefaultAllocator: Allocator<N, D1, U1> + Allocator<N, D2, U1> + SameShapeAllocator<N, D1, U1, D2, U1>,
    ShapeConstraint: SameNumberOfRows<D1, D2, Representative = D1> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D1>

The resulting type after applying the + operator.

fn add(self, right: Vector<N, D2, SB>) -> Self::Output

Performs the + operation.

impl<'b, N, D1: DimName, D2: Dim, SB> AddAssign<&'b Matrix<N, D2, U1, SB>> for Point<N, D1> where
    N: Scalar + ClosedAdd,
    SB: Storage<N, D2>,
    DefaultAllocator: Allocator<N, D1>,
    ShapeConstraint: SameNumberOfRows<D1, D2>, 

fn add_assign(&mut self, right: &'b Vector<N, D2, SB>)

Performs the += operation.

impl<N, D1: DimName, D2: Dim, SB> AddAssign<Matrix<N, D2, U1, SB>> for Point<N, D1> where
    N: Scalar + ClosedAdd,
    SB: Storage<N, D2>,
    DefaultAllocator: Allocator<N, D1>,
    ShapeConstraint: SameNumberOfRows<D1, D2>, 

fn add_assign(&mut self, right: Vector<N, D2, SB>)

Performs the += operation.

impl<N: Scalar + Bounded, D: DimName> Bounded for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn max_value() -> Self

returns the largest finite number this type can represent

fn min_value() -> Self

returns the smallest finite number this type can represent

impl<N: Clone + Scalar, D: Clone + DimName> Clone for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn clone(&self) -> Point<N, D>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<N: Scalar + Copy, D: DimName> Copy for Point<N, D> where
    DefaultAllocator: Allocator<N, D>,
    <DefaultAllocator as Allocator<N, D>>::Buffer: Copy, 

impl<N: Debug + Scalar, D: Debug + DimName> Debug for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<N: Scalar> Deref for Point<N, U1> where
    DefaultAllocator: Allocator<N, U1>, 

type Target = X<N>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<N: Scalar> Deref for Point<N, U2> where
    DefaultAllocator: Allocator<N, U2>, 

type Target = XY<N>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<N: Scalar> Deref for Point<N, U3> where
    DefaultAllocator: Allocator<N, U3>, 

type Target = XYZ<N>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<N: Scalar> Deref for Point<N, U4> where
    DefaultAllocator: Allocator<N, U4>, 

type Target = XYZW<N>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<N: Scalar> Deref for Point<N, U5> where
    DefaultAllocator: Allocator<N, U5>, 

type Target = XYZWA<N>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<N: Scalar> Deref for Point<N, U6> where
    DefaultAllocator: Allocator<N, U6>, 

type Target = XYZWAB<N>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<N: Scalar> DerefMut for Point<N, U1> where
    DefaultAllocator: Allocator<N, U1>, 

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<N: Scalar> DerefMut for Point<N, U2> where
    DefaultAllocator: Allocator<N, U2>, 

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<N: Scalar> DerefMut for Point<N, U3> where
    DefaultAllocator: Allocator<N, U3>, 

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<N: Scalar> DerefMut for Point<N, U4> where
    DefaultAllocator: Allocator<N, U4>, 

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<N: Scalar> DerefMut for Point<N, U5> where
    DefaultAllocator: Allocator<N, U5>, 

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<N: Scalar> DerefMut for Point<N, U6> where
    DefaultAllocator: Allocator<N, U6>, 

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<N: Scalar + Display, D: DimName> Display for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<N: Scalar, D: DimName> Distribution<Point<N, D>> for Standard where
    DefaultAllocator: Allocator<N, D>,
    Standard: Distribution<N>, 

fn sample<'a, G: Rng + ?Sized>(&self, rng: &mut G) -> Point<N, D>

Generate a random value of T, using rng as the source of randomness.

fn sample_iter<R>(self, rng: R) -> DistIter<Self, R, T> where
    R: Rng, 

Create an iterator that generates random values of T, using rng as the source of randomness.

impl<N: Scalar + ClosedDiv, D: DimName> Div<N> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the / operator.

fn div(self, right: N) -> Self::Output

Performs the / operation.

impl<'a, N: Scalar + ClosedDiv, D: DimName> Div<N> for &'a Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the / operator.

fn div(self, right: N) -> Self::Output

Performs the / operation.

impl<N: Scalar + ClosedDiv, D: DimName> DivAssign<N> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn div_assign(&mut self, right: N)

Performs the /= operation.

impl<N: Scalar + Eq, D: DimName> Eq for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

impl<N: Scalar> From<[N; 1]> for Point<N, U1>

fn from(coords: [N; 1]) -> Self

Performs the conversion.

impl<N: Scalar> From<[N; 2]> for Point<N, U2>

fn from(coords: [N; 2]) -> Self

Performs the conversion.

impl<N: Scalar> From<[N; 3]> for Point<N, U3>

fn from(coords: [N; 3]) -> Self

Performs the conversion.

impl<N: Scalar> From<[N; 4]> for Point<N, U4>

fn from(coords: [N; 4]) -> Self

Performs the conversion.

impl<N: Scalar> From<[N; 5]> for Point<N, U5>

fn from(coords: [N; 5]) -> Self

Performs the conversion.

impl<N: Scalar> From<[N; 6]> for Point<N, U6>

fn from(coords: [N; 6]) -> Self

Performs the conversion.

impl<N: Scalar + Copy + PrimitiveSimdValue, D: DimName> From<[Point<<N as SimdValue>::Element, D>; 16]> for Point<N, D> where
    N: From<[<N as SimdValue>::Element; 16]>,
    N::Element: Scalar + Copy,
    DefaultAllocator: Allocator<N, D> + Allocator<N::Element, D>,
    <DefaultAllocator as Allocator<N::Element, D>>::Buffer: Copy, 

fn from(arr: [Point<N::Element, D>; 16]) -> Self

Performs the conversion.

impl<N: Scalar + Copy + PrimitiveSimdValue, D: DimName> From<[Point<<N as SimdValue>::Element, D>; 2]> for Point<N, D> where
    N: From<[<N as SimdValue>::Element; 2]>,
    N::Element: Scalar + Copy,
    DefaultAllocator: Allocator<N, D> + Allocator<N::Element, D>,
    <DefaultAllocator as Allocator<N::Element, D>>::Buffer: Copy, 

fn from(arr: [Point<N::Element, D>; 2]) -> Self

Performs the conversion.

impl<N: Scalar + Copy + PrimitiveSimdValue, D: DimName> From<[Point<<N as SimdValue>::Element, D>; 4]> for Point<N, D> where
    N: From<[<N as SimdValue>::Element; 4]>,
    N::Element: Scalar + Copy,
    DefaultAllocator: Allocator<N, D> + Allocator<N::Element, D>,
    <DefaultAllocator as Allocator<N::Element, D>>::Buffer: Copy, 

fn from(arr: [Point<N::Element, D>; 4]) -> Self

Performs the conversion.

impl<N: Scalar + Copy + PrimitiveSimdValue, D: DimName> From<[Point<<N as SimdValue>::Element, D>; 8]> for Point<N, D> where
    N: From<[<N as SimdValue>::Element; 8]>,
    N::Element: Scalar + Copy,
    DefaultAllocator: Allocator<N, D> + Allocator<N::Element, D>,
    <DefaultAllocator as Allocator<N::Element, D>>::Buffer: Copy, 

fn from(arr: [Point<N::Element, D>; 8]) -> Self

Performs the conversion.

impl<N: Scalar, D: DimName> From<Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn from(coords: VectorN<N, D>) -> Self

Performs the conversion.

impl<N: Scalar + Zero + One, D: DimName> From<Point<N, D>> for VectorN<N, DimNameSum<D, U1>> where
    D: DimNameAdd<U1>,
    DefaultAllocator: Allocator<N, D> + Allocator<N, DimNameSum<D, U1>>, 

fn from(t: Point<N, D>) -> Self

Performs the conversion.

impl<N: Scalar + Hash, D: DimName + Hash> Hash for Point<N, D> where
    DefaultAllocator: Allocator<N, D>,
    <DefaultAllocator as Allocator<N, D>>::Buffer: Hash, 

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<N: Scalar, D: DimName> Index<usize> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

type Output = N

The returned type after indexing.

fn index(&self, i: usize) -> &Self::Output

Performs the indexing (container[index]) operation.

impl<N: Scalar, D: DimName> IndexMut<usize> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn index_mut(&mut self, i: usize) -> &mut Self::Output

Performs the mutable indexing (container[index]) operation.

impl<'b, N, D: DimName> Mul<&'b Point<N, D>> for Rotation<N, D> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul,
    DefaultAllocator: Allocator<N, D, D> + Allocator<N, D, U1>,
    DefaultAllocator: Allocator<N, D>,
    ShapeConstraint: AreMultipliable<D, D, D, U1>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, 'b, N, D: DimName> Mul<&'b Point<N, D>> for &'a Rotation<N, D> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul,
    DefaultAllocator: Allocator<N, D, D> + Allocator<N, D, U1>,
    DefaultAllocator: Allocator<N, D>,
    ShapeConstraint: AreMultipliable<D, D, D, U1>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, 'b, N, D: DimName> Mul<&'b Point<N, D>> for &'a Translation<N, D> where
    N: Scalar + ClosedAdd,
    DefaultAllocator: Allocator<N, D, U1> + SameShapeAllocator<N, D, U1, D, U1>,
    ShapeConstraint: SameNumberOfRows<D, D, Representative = D> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'b, N, D: DimName> Mul<&'b Point<N, D>> for Translation<N, D> where
    N: Scalar + ClosedAdd,
    DefaultAllocator: Allocator<N, D, U1> + SameShapeAllocator<N, D, U1, D, U1>,
    ShapeConstraint: SameNumberOfRows<D, D, Representative = D> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'b, N: SimdRealField, D: DimName, R> Mul<&'b Point<N, D>> for Isometry<N, D, R> where
    N::Element: SimdRealField,
    R: AbstractRotation<N, D>,
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, 'b, N: SimdRealField, D: DimName, R> Mul<&'b Point<N, D>> for &'a Isometry<N, D, R> where
    N::Element: SimdRealField,
    R: AbstractRotation<N, D>,
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'b, N: SimdRealField, D: DimName, R> Mul<&'b Point<N, D>> for Similarity<N, D, R> where
    N::Element: SimdRealField,
    R: AbstractRotation<N, D>,
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, 'b, N: SimdRealField, D: DimName, R> Mul<&'b Point<N, D>> for &'a Similarity<N, D, R> where
    N::Element: SimdRealField,
    R: AbstractRotation<N, D>,
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'b, N, D: DimNameAdd<U1>, C: TCategory> Mul<&'b Point<N, D>> for Transform<N, D, C> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul + RealField,
    DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,
    DefaultAllocator: Allocator<N, D, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategory> Mul<&'b Point<N, D>> for &'a Transform<N, D, C> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul + RealField,
    DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,
    DefaultAllocator: Allocator<N, D, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Point<N, D>) -> Self::Output

Performs the * operation.

impl<'b, N, R1: DimName, C1: Dim, D2: DimName, SA: Storage<N, R1, C1>> Mul<&'b Point<N, D2>> for Matrix<N, R1, C1, SA> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul,
    DefaultAllocator: Allocator<N, R1, C1> + Allocator<N, D2, U1> + Allocator<N, R1, U1>,
    ShapeConstraint: AreMultipliable<R1, C1, D2, U1>, 

type Output = Point<N, R1>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D2>) -> Self::Output

Performs the * operation.

impl<'a, 'b, N, R1: DimName, C1: Dim, D2: DimName, SA: Storage<N, R1, C1>> Mul<&'b Point<N, D2>> for &'a Matrix<N, R1, C1, SA> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul,
    DefaultAllocator: Allocator<N, R1, C1> + Allocator<N, D2, U1> + Allocator<N, R1, U1>,
    ShapeConstraint: AreMultipliable<R1, C1, D2, U1>, 

type Output = Point<N, R1>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<N, D2>) -> Self::Output

Performs the * operation.

impl<'b, N: SimdRealField> Mul<&'b Point<N, U2>> for UnitComplex<N> where
    N::Element: SimdRealField,
    DefaultAllocator: Allocator<N, U2, U1>, 

type Output = Point2<N>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Point2<N>) -> Self::Output

Performs the * operation.

impl<'a, 'b, N: SimdRealField> Mul<&'b Point<N, U2>> for &'a UnitComplex<N> where
    N::Element: SimdRealField,
    DefaultAllocator: Allocator<N, U2, U1>, 

type Output = Point2<N>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Point2<N>) -> Self::Output

Performs the * operation.

impl<'a, 'b, N: SimdRealField> Mul<&'b Point<N, U3>> for &'a UnitQuaternion<N> where
    N::Element: SimdRealField,
    DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U3, U1>, 

type Output = Point3<N>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Point3<N>) -> Self::Output

Performs the * operation.

impl<'b, N: SimdRealField> Mul<&'b Point<N, U3>> for UnitQuaternion<N> where
    N::Element: SimdRealField,
    DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U3, U1>, 

type Output = Point3<N>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Point3<N>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<f32, D>> for f32 where
    DefaultAllocator: Allocator<f32, D>, 

type Output = Point<f32, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<f32, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<f64, D>> for f64 where
    DefaultAllocator: Allocator<f64, D>, 

type Output = Point<f64, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<f64, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<i16, D>> for i16 where
    DefaultAllocator: Allocator<i16, D>, 

type Output = Point<i16, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<i16, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<i32, D>> for i32 where
    DefaultAllocator: Allocator<i32, D>, 

type Output = Point<i32, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<i32, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<i64, D>> for i64 where
    DefaultAllocator: Allocator<i64, D>, 

type Output = Point<i64, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<i64, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<i8, D>> for i8 where
    DefaultAllocator: Allocator<i8, D>, 

type Output = Point<i8, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<i8, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<isize, D>> for isize where
    DefaultAllocator: Allocator<isize, D>, 

type Output = Point<isize, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<isize, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<u16, D>> for u16 where
    DefaultAllocator: Allocator<u16, D>, 

type Output = Point<u16, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<u16, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<u32, D>> for u32 where
    DefaultAllocator: Allocator<u32, D>, 

type Output = Point<u32, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<u32, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<u64, D>> for u64 where
    DefaultAllocator: Allocator<u64, D>, 

type Output = Point<u64, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<u64, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<u8, D>> for u8 where
    DefaultAllocator: Allocator<u8, D>, 

type Output = Point<u8, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<u8, D>) -> Self::Output

Performs the * operation.

impl<'b, D: DimName> Mul<&'b Point<usize, D>> for usize where
    DefaultAllocator: Allocator<usize, D>, 

type Output = Point<usize, D>

The resulting type after applying the * operator.

fn mul(self, right: &'b Point<usize, D>) -> Self::Output

Performs the * operation.

impl<N: Scalar + ClosedMul, D: DimName> Mul<N> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: N) -> Self::Output

Performs the * operation.

impl<'a, N: Scalar + ClosedMul, D: DimName> Mul<N> for &'a Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: N) -> Self::Output

Performs the * operation.

impl<N, D: DimName> Mul<Point<N, D>> for Rotation<N, D> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul,
    DefaultAllocator: Allocator<N, D, D> + Allocator<N, D, U1>,
    DefaultAllocator: Allocator<N, D>,
    ShapeConstraint: AreMultipliable<D, D, D, U1>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, N, D: DimName> Mul<Point<N, D>> for &'a Rotation<N, D> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul,
    DefaultAllocator: Allocator<N, D, D> + Allocator<N, D, U1>,
    DefaultAllocator: Allocator<N, D>,
    ShapeConstraint: AreMultipliable<D, D, D, U1>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, N, D: DimName> Mul<Point<N, D>> for &'a Translation<N, D> where
    N: Scalar + ClosedAdd,
    DefaultAllocator: Allocator<N, D, U1> + SameShapeAllocator<N, D, U1, D, U1>,
    ShapeConstraint: SameNumberOfRows<D, D, Representative = D> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D>) -> Self::Output

Performs the * operation.

impl<N, D: DimName> Mul<Point<N, D>> for Translation<N, D> where
    N: Scalar + ClosedAdd,
    DefaultAllocator: Allocator<N, D, U1> + SameShapeAllocator<N, D, U1, D, U1>,
    ShapeConstraint: SameNumberOfRows<D, D, Representative = D> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D>) -> Self::Output

Performs the * operation.

impl<N: SimdRealField, D: DimName, R> Mul<Point<N, D>> for Isometry<N, D, R> where
    N::Element: SimdRealField,
    R: AbstractRotation<N, D>,
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, N: SimdRealField, D: DimName, R> Mul<Point<N, D>> for &'a Isometry<N, D, R> where
    N::Element: SimdRealField,
    R: AbstractRotation<N, D>,
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D>) -> Self::Output

Performs the * operation.

impl<N: SimdRealField, D: DimName, R> Mul<Point<N, D>> for Similarity<N, D, R> where
    N::Element: SimdRealField,
    R: AbstractRotation<N, D>,
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, N: SimdRealField, D: DimName, R> Mul<Point<N, D>> for &'a Similarity<N, D, R> where
    N::Element: SimdRealField,
    R: AbstractRotation<N, D>,
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D>) -> Self::Output

Performs the * operation.

impl<N, D: DimNameAdd<U1>, C: TCategory> Mul<Point<N, D>> for Transform<N, D, C> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul + RealField,
    DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,
    DefaultAllocator: Allocator<N, D, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, rhs: Point<N, D>) -> Self::Output

Performs the * operation.

impl<'a, N, D: DimNameAdd<U1>, C: TCategory> Mul<Point<N, D>> for &'a Transform<N, D, C> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul + RealField,
    DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,
    DefaultAllocator: Allocator<N, D, D>, 

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, rhs: Point<N, D>) -> Self::Output

Performs the * operation.

impl<N, R1: DimName, C1: Dim, D2: DimName, SA: Storage<N, R1, C1>> Mul<Point<N, D2>> for Matrix<N, R1, C1, SA> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul,
    DefaultAllocator: Allocator<N, R1, C1> + Allocator<N, D2, U1> + Allocator<N, R1, U1>,
    ShapeConstraint: AreMultipliable<R1, C1, D2, U1>, 

type Output = Point<N, R1>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D2>) -> Self::Output

Performs the * operation.

impl<'a, N, R1: DimName, C1: Dim, D2: DimName, SA: Storage<N, R1, C1>> Mul<Point<N, D2>> for &'a Matrix<N, R1, C1, SA> where
    N: Scalar + Zero + One + ClosedAdd + ClosedMul,
    DefaultAllocator: Allocator<N, R1, C1> + Allocator<N, D2, U1> + Allocator<N, R1, U1>,
    ShapeConstraint: AreMultipliable<R1, C1, D2, U1>, 

type Output = Point<N, R1>

The resulting type after applying the * operator.

fn mul(self, right: Point<N, D2>) -> Self::Output

Performs the * operation.

impl<N: SimdRealField> Mul<Point<N, U2>> for UnitComplex<N> where
    N::Element: SimdRealField,
    DefaultAllocator: Allocator<N, U2, U1>, 

type Output = Point2<N>

The resulting type after applying the * operator.

fn mul(self, rhs: Point2<N>) -> Self::Output

Performs the * operation.

impl<'a, N: SimdRealField> Mul<Point<N, U2>> for &'a UnitComplex<N> where
    N::Element: SimdRealField,
    DefaultAllocator: Allocator<N, U2, U1>, 

type Output = Point2<N>

The resulting type after applying the * operator.

fn mul(self, rhs: Point2<N>) -> Self::Output

Performs the * operation.

impl<'a, N: SimdRealField> Mul<Point<N, U3>> for &'a UnitQuaternion<N> where
    N::Element: SimdRealField,
    DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U3, U1>, 

type Output = Point3<N>

The resulting type after applying the * operator.

fn mul(self, rhs: Point3<N>) -> Self::Output

Performs the * operation.

impl<N: SimdRealField> Mul<Point<N, U3>> for UnitQuaternion<N> where
    N::Element: SimdRealField,
    DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U3, U1>, 

type Output = Point3<N>

The resulting type after applying the * operator.

fn mul(self, rhs: Point3<N>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<f32, D>> for f32 where
    DefaultAllocator: Allocator<f32, D>, 

type Output = Point<f32, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<f32, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<f64, D>> for f64 where
    DefaultAllocator: Allocator<f64, D>, 

type Output = Point<f64, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<f64, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<i16, D>> for i16 where
    DefaultAllocator: Allocator<i16, D>, 

type Output = Point<i16, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<i16, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<i32, D>> for i32 where
    DefaultAllocator: Allocator<i32, D>, 

type Output = Point<i32, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<i32, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<i64, D>> for i64 where
    DefaultAllocator: Allocator<i64, D>, 

type Output = Point<i64, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<i64, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<i8, D>> for i8 where
    DefaultAllocator: Allocator<i8, D>, 

type Output = Point<i8, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<i8, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<isize, D>> for isize where
    DefaultAllocator: Allocator<isize, D>, 

type Output = Point<isize, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<isize, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<u16, D>> for u16 where
    DefaultAllocator: Allocator<u16, D>, 

type Output = Point<u16, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<u16, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<u32, D>> for u32 where
    DefaultAllocator: Allocator<u32, D>, 

type Output = Point<u32, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<u32, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<u64, D>> for u64 where
    DefaultAllocator: Allocator<u64, D>, 

type Output = Point<u64, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<u64, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<u8, D>> for u8 where
    DefaultAllocator: Allocator<u8, D>, 

type Output = Point<u8, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<u8, D>) -> Self::Output

Performs the * operation.

impl<D: DimName> Mul<Point<usize, D>> for usize where
    DefaultAllocator: Allocator<usize, D>, 

type Output = Point<usize, D>

The resulting type after applying the * operator.

fn mul(self, right: Point<usize, D>) -> Self::Output

Performs the * operation.

impl<N: Scalar + ClosedMul, D: DimName> MulAssign<N> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn mul_assign(&mut self, right: N)

Performs the *= operation.

impl<N: Scalar + ClosedNeg, D: DimName> Neg for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

type Output = Self

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl<'a, N: Scalar + ClosedNeg, D: DimName> Neg for &'a Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

type Output = Point<N, D>

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl<N: Scalar, D: DimName> PartialEq<Point<N, D>> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn eq(&self, right: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<N: Scalar + PartialOrd, D: DimName> PartialOrd<Point<N, D>> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>, 

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, right: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, right: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, right: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, right: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<N: Scalar + RelativeEq, D: DimName> RelativeEq<Point<N, D>> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>,
    N::Epsilon: Copy, 

fn default_max_relative() -> Self::Epsilon

The default relative tolerance for testing values that are far-apart.

fn relative_eq(
    &self,
    other: &Self,
    epsilon: Self::Epsilon,
    max_relative: Self::Epsilon
) -> bool

A test for equality that uses a relative comparison if the values are far apart.

fn relative_ne(
    &self,
    other: &Rhs,
    epsilon: Self::Epsilon,
    max_relative: Self::Epsilon
) -> bool

The inverse of ApproxEq::relative_eq.

impl<N: Scalar + SimdValue, D: DimName> SimdValue for Point<N, D> where
    N::Element: Scalar,
    DefaultAllocator: Allocator<N, D> + Allocator<N::Element, D>, 

type Element = Point<N::Element, D>

The type of the elements of each lane of this SIMD value.

type SimdBool = N::SimdBool

Type of the result of comparing two SIMD values like self.

fn lanes() -> usize

The number of lanes of this SIMD value.

fn splat(val: Self::Element) -> Self

Initializes an SIMD value with each lanes set to val.

fn extract(&self, i: usize) -> Self::Element

Extracts the i-th lane of self.

unsafe fn extract_unchecked(&self, i: usize) -> Self::Element

Extracts the i-th lane of self without bound-checking.

fn replace(&mut self, i: usize, val: Self::Element)

Replaces the i-th lane of self by val.

unsafe fn replace_unchecked(&mut self, i: usize, val: Self::Element)

Replaces the i-th lane of self by val without bound-checking.

fn select(self, cond: Self::SimdBool, other: Self) -> Self

Merges self and other depending on the lanes of cond.

fn map_lanes(self, f: impl Fn(Self::Element) -> Self::Element) -> Self where
    Self: Clone, 

Applies a function to each lane of self.

fn zip_map_lanes(
    self,
    b: Self,
    f: impl Fn(Self::Element, Self::Element) -> Self::Element
) -> Self where
    Self: Clone, 

Applies a function to each lane of self paired with the corresponding lane of b.

impl<'a, 'b, N, D1: DimName, D2: Dim, SB: Storage<N, D2>> Sub<&'b Matrix<N, D2, U1, SB>> for &'a Point<N, D1> where
    N: Scalar + ClosedSub,
    DefaultAllocator: Allocator<N, D1, U1> + Allocator<N, D2, U1> + SameShapeAllocator<N, D1, U1, D2, U1>,
    ShapeConstraint: SameNumberOfRows<D1, D2, Representative = D1> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D1>

The resulting type after applying the - operator.

fn sub(self, right: &'b Vector<N, D2, SB>) -> Self::Output

Performs the - operation.

impl<'b, N, D1: DimName, D2: Dim, SB: Storage<N, D2>> Sub<&'b Matrix<N, D2, U1, SB>> for Point<N, D1> where
    N: Scalar + ClosedSub,
    DefaultAllocator: Allocator<N, D1, U1> + Allocator<N, D2, U1> + SameShapeAllocator<N, D1, U1, D2, U1>,
    ShapeConstraint: SameNumberOfRows<D1, D2, Representative = D1> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D1>

The resulting type after applying the - operator.

fn sub(self, right: &'b Vector<N, D2, SB>) -> Self::Output

Performs the - operation.

impl<'a, 'b, N, D: DimName> Sub<&'b Point<N, D>> for &'a Point<N, D> where
    N: Scalar + ClosedSub,
    DefaultAllocator: Allocator<N, D, U1> + SameShapeAllocator<N, D, U1, D, U1>,
    ShapeConstraint: SameNumberOfRows<D, D> + SameNumberOfColumns<U1, U1>, 

type Output = VectorSum<N, D, D>

The resulting type after applying the - operator.

fn sub(self, right: &'b Point<N, D>) -> Self::Output

Performs the - operation.

impl<'b, N, D: DimName> Sub<&'b Point<N, D>> for Point<N, D> where
    N: Scalar + ClosedSub,
    DefaultAllocator: Allocator<N, D, U1> + SameShapeAllocator<N, D, U1, D, U1>,
    ShapeConstraint: SameNumberOfRows<D, D> + SameNumberOfColumns<U1, U1>, 

type Output = VectorSum<N, D, D>

The resulting type after applying the - operator.

fn sub(self, right: &'b Point<N, D>) -> Self::Output

Performs the - operation.

impl<'a, N, D1: DimName, D2: Dim, SB: Storage<N, D2>> Sub<Matrix<N, D2, U1, SB>> for &'a Point<N, D1> where
    N: Scalar + ClosedSub,
    DefaultAllocator: Allocator<N, D1, U1> + Allocator<N, D2, U1> + SameShapeAllocator<N, D1, U1, D2, U1>,
    ShapeConstraint: SameNumberOfRows<D1, D2, Representative = D1> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D1>

The resulting type after applying the - operator.

fn sub(self, right: Vector<N, D2, SB>) -> Self::Output

Performs the - operation.

impl<N, D1: DimName, D2: Dim, SB: Storage<N, D2>> Sub<Matrix<N, D2, U1, SB>> for Point<N, D1> where
    N: Scalar + ClosedSub,
    DefaultAllocator: Allocator<N, D1, U1> + Allocator<N, D2, U1> + SameShapeAllocator<N, D1, U1, D2, U1>,
    ShapeConstraint: SameNumberOfRows<D1, D2, Representative = D1> + SameNumberOfColumns<U1, U1>, 

type Output = Point<N, D1>

The resulting type after applying the - operator.

fn sub(self, right: Vector<N, D2, SB>) -> Self::Output

Performs the - operation.

impl<'a, N, D: DimName> Sub<Point<N, D>> for &'a Point<N, D> where
    N: Scalar + ClosedSub,
    DefaultAllocator: Allocator<N, D, U1> + SameShapeAllocator<N, D, U1, D, U1>,
    ShapeConstraint: SameNumberOfRows<D, D> + SameNumberOfColumns<U1, U1>, 

type Output = VectorSum<N, D, D>

The resulting type after applying the - operator.

fn sub(self, right: Point<N, D>) -> Self::Output

Performs the - operation.

impl<N, D: DimName> Sub<Point<N, D>> for Point<N, D> where
    N: Scalar + ClosedSub,
    DefaultAllocator: Allocator<N, D, U1> + SameShapeAllocator<N, D, U1, D, U1>,
    ShapeConstraint: SameNumberOfRows<D, D> + SameNumberOfColumns<U1, U1>, 

type Output = VectorSum<N, D, D>

The resulting type after applying the - operator.

fn sub(self, right: Point<N, D>) -> Self::Output

Performs the - operation.

impl<'b, N, D1: DimName, D2: Dim, SB> SubAssign<&'b Matrix<N, D2, U1, SB>> for Point<N, D1> where
    N: Scalar + ClosedSub,
    SB: Storage<N, D2>,
    DefaultAllocator: Allocator<N, D1>,
    ShapeConstraint: SameNumberOfRows<D1, D2>, 

fn sub_assign(&mut self, right: &'b Vector<N, D2, SB>)

Performs the -= operation.

impl<N, D1: DimName, D2: Dim, SB> SubAssign<Matrix<N, D2, U1, SB>> for Point<N, D1> where
    N: Scalar + ClosedSub,
    SB: Storage<N, D2>,
    DefaultAllocator: Allocator<N, D1>,
    ShapeConstraint: SameNumberOfRows<D1, D2>, 

fn sub_assign(&mut self, right: Vector<N, D2, SB>)

Performs the -= operation.

impl<N1, N2, D> SubsetOf<Matrix<N2, <D as DimNameAdd<U1>>::Output, U1, <DefaultAllocator as Allocator<N2, <D as DimNameAdd<U1>>::Output, U1>>::Buffer>> for Point<N1, D> where
    D: DimNameAdd<U1>,
    N1: Scalar,
    N2: Scalar + Zero + One + ClosedDiv + SupersetOf<N1>,
    DefaultAllocator: Allocator<N1, D> + Allocator<N1, DimNameSum<D, U1>> + Allocator<N2, DimNameSum<D, U1>> + Allocator<N2, D>, 

fn to_superset(&self) -> VectorN<N2, DimNameSum<D, U1>>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(v: &VectorN<N2, DimNameSum<D, U1>>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

fn from_superset_unchecked(v: &VectorN<N2, DimNameSum<D, U1>>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset.

impl<N1, N2, D> SubsetOf<Point<N2, D>> for Point<N1, D> where
    D: DimName,
    N1: Scalar,
    N2: Scalar + SupersetOf<N1>,
    DefaultAllocator: Allocator<N2, D> + Allocator<N1, D>, 

fn to_superset(&self) -> Point<N2, D>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(m: &Point<N2, D>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

fn from_superset_unchecked(m: &Point<N2, D>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset.

impl<N: Scalar + UlpsEq, D: DimName> UlpsEq<Point<N, D>> for Point<N, D> where
    DefaultAllocator: Allocator<N, D>,
    N::Epsilon: Copy, 

fn default_max_ulps() -> u32

The default ULPs to tolerate when testing values that are far-apart.

fn ulps_eq(&self, other: &Self, epsilon: Self::Epsilon, max_ulps: u32) -> bool

A test for equality that uses units in the last place (ULP) if the values are far apart.

fn ulps_ne(&self, other: &Rhs, epsilon: Self::Epsilon, max_ulps: u32) -> bool

The inverse of ApproxEq::ulps_eq.