Crate mlx9064x[−][src]

Expand description

A pure-Rust library for accessing the MLX90640 and MLX90641 (eventually!) thermal cameras over I²C.

These cameras have a large amount of calibration data that must be pre-processed before use, and the output data also requires a somewhat complex process to turn it into temperature data. This crate has two levels of API, a high-level API that handles the calibration data and raw data processing for you, and a low-level API if you need to go beyond what the high-level API can do for you.

This library uses the embedded-hal I²C traits, meaning you should be able to use this library on other platforms, as long as there’s an embedded-hal I²C implementation available. This library is also no_std compatible (there is a large memory requirement though).

High-Level API

use std::thread::sleep;
use std::time::Duration;
use mlx9064x::Mlx90640Driver;
use linux_embedded_hal::I2cdev;

let i2c_bus = I2cdev::new("/dev/i2c-1").expect("/dev/i2c-1 needs to be an I2C controller");
// Default address for these cameras is 0x33
let mut camera = Mlx90640Driver::new(i2c_bus, 0x33)?;
// A buffer for storing the temperature "image"
let mut temperatures = vec![0f32; camera.height() * camera.width()];
camera.generate_image_if_ready(&mut temperatures)?;
// Default frame rate is 2Hz
sleep(Duration::from_millis(500));
camera.generate_image_if_ready(&mut temperatures)?;

This snippet gives a quick example of using the high-level API with an MLX90640 on Linux. The camera is using the I²C bus #1 (/dev/i2c-1) and the default I²C address (0x33). The calibration data is loaded from the camera over I²C and saved into an Mlx90640Calibration within camera. A destination buffer is created to store the temperature data from the camera using a Vec, and then the temperature data is retrieved twice to cover both subpages, with a delay between the accesses to allow the next frame of data to become available.

The high-level API is exposed through CameraDriver, and also makes it easy to configure the camera settings like frame rate or access mode. If you need to tailor the functionality beyond what CameraDriver provides for you, the low-level API is probably a better choice for you.

Low-Level API

The low-level API is the foundation for the high-level API, exposed for those cases where a more customized approach is needed. A common example is customizing how the calibration data is loaded. To reduce startup time and memory usage, you might want to pre-process the calibration data for a specific camera and store it in a microcontroller’s flash memory. This can be done by implementing CalibrationData. Because CameraDriver is generic over CalibrationData, you can use your custom CalibrationData with the rest of the high-level API with almost no changes.

Most users of the low-level API will probably find the common, register, and calculations modules most relevant to their needs, with camera-model specific constants and types available in the mlx90640 and mlx90641 modules.

Subpages and Access Patterns

A significant difference between these Melexis cameras and other common thermal cameras is how the Melexis cameras update their image data. Each frame, one subpage of data is updated. For the MLX90640 each subpage covers half of the pixels, and the access pattern determines how the pixels are divided between the subpages. The MLX90641’s subpages cover all of the pixels (and the access pattern should not be changed from interleave).