1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217
#[doc = r"Register block"] #[repr(C)] pub struct RegisterBlock { _reserved0: [u8; 3072usize], #[doc = "0xc00 - Configuration register 1 for the primary channel pair."] pub cfg1: CFG1, #[doc = "0xc04 - Configuration register 2 for the primary channel pair."] pub cfg2: CFG2, #[doc = "0xc08 - Status register for the primary channel pair."] pub stat: STAT, _reserved3: [u8; 16usize], #[doc = "0xc1c - Clock divider, used by all channel pairs."] pub div: DIV, _reserved4: [u8; 480usize], #[doc = "0xe00 - FIFO configuration and enable register."] pub fifocfg: FIFOCFG, #[doc = "0xe04 - FIFO status register."] pub fifostat: FIFOSTAT, #[doc = "0xe08 - FIFO trigger settings for interrupt and DMA request."] pub fifotrig: FIFOTRIG, _reserved7: [u8; 4usize], #[doc = "0xe10 - FIFO interrupt enable set (enable) and read register."] pub fifointenset: FIFOINTENSET, #[doc = "0xe14 - FIFO interrupt enable clear (disable) and read register."] pub fifointenclr: FIFOINTENCLR, #[doc = "0xe18 - FIFO interrupt status register."] pub fifointstat: FIFOINTSTAT, _reserved10: [u8; 4usize], #[doc = "0xe20 - FIFO write data."] pub fifowr: FIFOWR, #[doc = "0xe24 - FIFO write data for upper data bits. May only be used if the I2S is configured for 2x 24-bit data and not using DMA."] pub fifowr48h: FIFOWR48H, _reserved12: [u8; 8usize], #[doc = "0xe30 - FIFO read data."] pub fiford: FIFORD, #[doc = "0xe34 - FIFO read data for upper data bits. May only be used if the I2S is configured for 2x 24-bit data and not using DMA."] pub fiford48h: FIFORD48H, _reserved14: [u8; 8usize], #[doc = "0xe40 - FIFO data read with no FIFO pop."] pub fifordnopop: FIFORDNOPOP, #[doc = "0xe44 - FIFO data read for upper data bits with no FIFO pop. May only be used if the I2S is configured for 2x 24-bit data and not using DMA."] pub fiford48hnopop: FIFORD48HNOPOP, _reserved16: [u8; 436usize], #[doc = "0xffc - I2S Module identification"] pub id: ID, } #[doc = "Configuration register 1 for the primary channel pair.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [cfg1](cfg1) module"] pub type CFG1 = crate::Reg<u32, _CFG1>; #[allow(missing_docs)] #[doc(hidden)] pub struct _CFG1; #[doc = "`read()` method returns [cfg1::R](cfg1::R) reader structure"] impl crate::Readable for CFG1 {} #[doc = "`write(|w| ..)` method takes [cfg1::W](cfg1::W) writer structure"] impl crate::Writable for CFG1 {} #[doc = "Configuration register 1 for the primary channel pair."] pub mod cfg1; #[doc = "Configuration register 2 for the primary channel pair.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [cfg2](cfg2) module"] pub type CFG2 = crate::Reg<u32, _CFG2>; #[allow(missing_docs)] #[doc(hidden)] pub struct _CFG2; #[doc = "`read()` method returns [cfg2::R](cfg2::R) reader structure"] impl crate::Readable for CFG2 {} #[doc = "`write(|w| ..)` method takes [cfg2::W](cfg2::W) writer structure"] impl crate::Writable for CFG2 {} #[doc = "Configuration register 2 for the primary channel pair."] pub mod cfg2; #[doc = "Status register for the primary channel pair.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [stat](stat) module"] pub type STAT = crate::Reg<u32, _STAT>; #[allow(missing_docs)] #[doc(hidden)] pub struct _STAT; #[doc = "`read()` method returns [stat::R](stat::R) reader structure"] impl crate::Readable for STAT {} #[doc = "`write(|w| ..)` method takes [stat::W](stat::W) writer structure"] impl crate::Writable for STAT {} #[doc = "Status register for the primary channel pair."] pub mod stat; #[doc = "Clock divider, used by all channel pairs.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [div](div) module"] pub type DIV = crate::Reg<u32, _DIV>; #[allow(missing_docs)] #[doc(hidden)] pub struct _DIV; #[doc = "`read()` method returns [div::R](div::R) reader structure"] impl crate::Readable for DIV {} #[doc = "`write(|w| ..)` method takes [div::W](div::W) writer structure"] impl crate::Writable for DIV {} #[doc = "Clock divider, used by all channel pairs."] pub mod div; #[doc = "FIFO configuration and enable register.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifocfg](fifocfg) module"] pub type FIFOCFG = crate::Reg<u32, _FIFOCFG>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFOCFG; #[doc = "`read()` method returns [fifocfg::R](fifocfg::R) reader structure"] impl crate::Readable for FIFOCFG {} #[doc = "`write(|w| ..)` method takes [fifocfg::W](fifocfg::W) writer structure"] impl crate::Writable for FIFOCFG {} #[doc = "FIFO configuration and enable register."] pub mod fifocfg; #[doc = "FIFO status register.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifostat](fifostat) module"] pub type FIFOSTAT = crate::Reg<u32, _FIFOSTAT>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFOSTAT; #[doc = "`read()` method returns [fifostat::R](fifostat::R) reader structure"] impl crate::Readable for FIFOSTAT {} #[doc = "`write(|w| ..)` method takes [fifostat::W](fifostat::W) writer structure"] impl crate::Writable for FIFOSTAT {} #[doc = "FIFO status register."] pub mod fifostat; #[doc = "FIFO trigger settings for interrupt and DMA request.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifotrig](fifotrig) module"] pub type FIFOTRIG = crate::Reg<u32, _FIFOTRIG>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFOTRIG; #[doc = "`read()` method returns [fifotrig::R](fifotrig::R) reader structure"] impl crate::Readable for FIFOTRIG {} #[doc = "`write(|w| ..)` method takes [fifotrig::W](fifotrig::W) writer structure"] impl crate::Writable for FIFOTRIG {} #[doc = "FIFO trigger settings for interrupt and DMA request."] pub mod fifotrig; #[doc = "FIFO interrupt enable set (enable) and read register.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifointenset](fifointenset) module"] pub type FIFOINTENSET = crate::Reg<u32, _FIFOINTENSET>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFOINTENSET; #[doc = "`read()` method returns [fifointenset::R](fifointenset::R) reader structure"] impl crate::Readable for FIFOINTENSET {} #[doc = "`write(|w| ..)` method takes [fifointenset::W](fifointenset::W) writer structure"] impl crate::Writable for FIFOINTENSET {} #[doc = "FIFO interrupt enable set (enable) and read register."] pub mod fifointenset; #[doc = "FIFO interrupt enable clear (disable) and read register.\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifointenclr](fifointenclr) module"] pub type FIFOINTENCLR = crate::Reg<u32, _FIFOINTENCLR>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFOINTENCLR; #[doc = "`read()` method returns [fifointenclr::R](fifointenclr::R) reader structure"] impl crate::Readable for FIFOINTENCLR {} #[doc = "`write(|w| ..)` method takes [fifointenclr::W](fifointenclr::W) writer structure"] impl crate::Writable for FIFOINTENCLR {} #[doc = "FIFO interrupt enable clear (disable) and read register."] pub mod fifointenclr; #[doc = "FIFO interrupt status register.\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifointstat](fifointstat) module"] pub type FIFOINTSTAT = crate::Reg<u32, _FIFOINTSTAT>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFOINTSTAT; #[doc = "`read()` method returns [fifointstat::R](fifointstat::R) reader structure"] impl crate::Readable for FIFOINTSTAT {} #[doc = "FIFO interrupt status register."] pub mod fifointstat; #[doc = "FIFO write data.\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifowr](fifowr) module"] pub type FIFOWR = crate::Reg<u32, _FIFOWR>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFOWR; #[doc = "`write(|w| ..)` method takes [fifowr::W](fifowr::W) writer structure"] impl crate::Writable for FIFOWR {} #[doc = "FIFO write data."] pub mod fifowr; #[doc = "FIFO write data for upper data bits. May only be used if the I2S is configured for 2x 24-bit data and not using DMA.\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifowr48h](fifowr48h) module"] pub type FIFOWR48H = crate::Reg<u32, _FIFOWR48H>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFOWR48H; #[doc = "`write(|w| ..)` method takes [fifowr48h::W](fifowr48h::W) writer structure"] impl crate::Writable for FIFOWR48H {} #[doc = "FIFO write data for upper data bits. May only be used if the I2S is configured for 2x 24-bit data and not using DMA."] pub mod fifowr48h; #[doc = "FIFO read data.\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fiford](fiford) module"] pub type FIFORD = crate::Reg<u32, _FIFORD>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFORD; #[doc = "`read()` method returns [fiford::R](fiford::R) reader structure"] impl crate::Readable for FIFORD {} #[doc = "FIFO read data."] pub mod fiford; #[doc = "FIFO read data for upper data bits. May only be used if the I2S is configured for 2x 24-bit data and not using DMA.\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fiford48h](fiford48h) module"] pub type FIFORD48H = crate::Reg<u32, _FIFORD48H>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFORD48H; #[doc = "`read()` method returns [fiford48h::R](fiford48h::R) reader structure"] impl crate::Readable for FIFORD48H {} #[doc = "FIFO read data for upper data bits. May only be used if the I2S is configured for 2x 24-bit data and not using DMA."] pub mod fiford48h; #[doc = "FIFO data read with no FIFO pop.\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fifordnopop](fifordnopop) module"] pub type FIFORDNOPOP = crate::Reg<u32, _FIFORDNOPOP>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFORDNOPOP; #[doc = "`read()` method returns [fifordnopop::R](fifordnopop::R) reader structure"] impl crate::Readable for FIFORDNOPOP {} #[doc = "FIFO data read with no FIFO pop."] pub mod fifordnopop; #[doc = "FIFO data read for upper data bits with no FIFO pop. May only be used if the I2S is configured for 2x 24-bit data and not using DMA.\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [fiford48hnopop](fiford48hnopop) module"] pub type FIFORD48HNOPOP = crate::Reg<u32, _FIFORD48HNOPOP>; #[allow(missing_docs)] #[doc(hidden)] pub struct _FIFORD48HNOPOP; #[doc = "`read()` method returns [fiford48hnopop::R](fiford48hnopop::R) reader structure"] impl crate::Readable for FIFORD48HNOPOP {} #[doc = "FIFO data read for upper data bits with no FIFO pop. May only be used if the I2S is configured for 2x 24-bit data and not using DMA."] pub mod fiford48hnopop; #[doc = "I2S Module identification\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [id](id) module"] pub type ID = crate::Reg<u32, _ID>; #[allow(missing_docs)] #[doc(hidden)] pub struct _ID; #[doc = "`read()` method returns [id::R](id::R) reader structure"] impl crate::Readable for ID {} #[doc = "I2S Module identification"] pub mod id;