[−][src]Module lpc55s6x_pac::iocon::pio0_14
Digital I/O control for port 0 pins PIO0_14
Structs
DIGIMODE_W | Write proxy for field |
ECS_W | Write proxy for field |
EGP_W | Write proxy for field |
FILTEROFF_W | Write proxy for field |
FUNC_W | Write proxy for field |
I2CFILTER_W | Write proxy for field |
INVERT_W | Write proxy for field |
MODE_W | Write proxy for field |
OD_W | Write proxy for field |
SLEW_W | Write proxy for field |
SSEL_W | Write proxy for field |
Enums
DIGIMODE_A | Select Digital mode. |
ECS_A | Pull-up current source enable in I2C mode. |
EGP_A | Switch between GPIO mode and I2C mode. |
FILTEROFF_A | Controls input glitch filter. |
FUNC_A | Selects pin function. |
I2CFILTER_A | Configures I2C features for standard mode, fast mode, and Fast Mode Plus operation and High-Speed mode operation. |
INVERT_A | Input polarity. |
MODE_A | Selects function mode (on-chip pull-up/pull-down resistor control). |
OD_A | Controls open-drain mode in standard GPIO mode (EGP = 1). This bit has no effect in I2C mode (EGP=0). |
SLEW_A | Driver slew rate. |
SSEL_A | Supply Selection bit. |
Type Definitions
DIGIMODE_R | Reader of field |
ECS_R | Reader of field |
EGP_R | Reader of field |
FILTEROFF_R | Reader of field |
FUNC_R | Reader of field |
I2CFILTER_R | Reader of field |
INVERT_R | Reader of field |
MODE_R | Reader of field |
OD_R | Reader of field |
R | Reader of register PIO0_14 |
SLEW_R | Reader of field |
SSEL_R | Reader of field |
W | Writer for register PIO0_14 |