AVALID_OVERRIDE_R | Field AVALID_OVERRIDE reader - Override value for A-Device Session Valid The bit field provides the value for USB1_VBUS_DET_STAT[2]
if USB_VBUS_DETECT[3]
is set to value 1’b1
|
AVALID_OVERRIDE_W | Field AVALID_OVERRIDE writer - Override value for A-Device Session Valid The bit field provides the value for USB1_VBUS_DET_STAT[2]
if USB_VBUS_DETECT[3]
is set to value 1’b1
|
BVALID_OVERRIDE_R | Field BVALID_OVERRIDE reader - Override value for B-Device Session Valid The bit field provides the value for USB1_VBUS_DET_STAT[1]
if USB_VBUS_DETECT[3]
is set to value 1’b1
|
BVALID_OVERRIDE_W | Field BVALID_OVERRIDE writer - Override value for B-Device Session Valid The bit field provides the value for USB1_VBUS_DET_STAT[1]
if USB_VBUS_DETECT[3]
is set to value 1’b1
|
DISCHARGE_VBUS_R | Field DISCHARGE_VBUS reader - Controls VBUS discharge resistor This bit field controls a nominal 22kohm resistor between the USB1_VBUS pin and ground
|
DISCHARGE_VBUS_W | Field DISCHARGE_VBUS writer - Controls VBUS discharge resistor This bit field controls a nominal 22kohm resistor between the USB1_VBUS pin and ground
|
EXT_ID_OVERRIDE_EN_R | Field EXT_ID_OVERRIDE_EN reader - Enable ID override using the pinmuxed value:
|
EXT_ID_OVERRIDE_EN_W | Field EXT_ID_OVERRIDE_EN writer - Enable ID override using the pinmuxed value:
|
EXT_VBUS_OVERRIDE_EN_R | Field EXT_VBUS_OVERRIDE_EN reader - Enable VBUS override using the pin muxed value.
|
EXT_VBUS_OVERRIDE_EN_W | Field EXT_VBUS_OVERRIDE_EN writer - Enable VBUS override using the pin muxed value.
|
ID_OVERRIDE_EN_R | Field ID_OVERRIDE_EN reader - Enable ID override using the register field. This bit is only used if EXT_ID_OVERRIDE_EN = 1’b0.
|
ID_OVERRIDE_EN_W | Field ID_OVERRIDE_EN writer - Enable ID override using the register field. This bit is only used if EXT_ID_OVERRIDE_EN = 1’b0.
|
ID_OVERRIDE_R | Field ID_OVERRIDE reader - ID override value.
|
ID_OVERRIDE_W | Field ID_OVERRIDE writer - ID override value.
|
PWRUP_CMPS_R | Field PWRUP_CMPS reader - Enables the VBUS_VALID comparator: Powers up the comparator used for the VBUS_VALID detector
|
PWRUP_CMPS_W | Field PWRUP_CMPS writer - Enables the VBUS_VALID comparator: Powers up the comparator used for the VBUS_VALID detector
|
R | Register USB1_VBUS_DETECT_CLR reader
|
SESSEND_OVERRIDE_R | Field SESSEND_OVERRIDE reader - Override value for SESSEND The bit field provides the value for USB1_VBUS_DET_STAT[0]
if USB_VBUS_DETECT[3]
is set to value 1’b1
|
SESSEND_OVERRIDE_W | Field SESSEND_OVERRIDE writer - Override value for SESSEND The bit field provides the value for USB1_VBUS_DET_STAT[0]
if USB_VBUS_DETECT[3]
is set to value 1’b1
|
USB1_VBUS_DETECT_CLR_SPEC | USB PHY VBUS Detect Control Register
|
VBUSVALID_5VDETECT_R | Field VBUSVALID_5VDETECT reader - no description available
|
VBUSVALID_5VDETECT_W | Field VBUSVALID_5VDETECT writer - no description available
|
VBUSVALID_OVERRIDE_R | Field VBUSVALID_OVERRIDE reader - Override value for VBUS_VALID signal sent to USB controller The bit field provides the value for VBUS_VALID reported to the USB controller if the value of USB1_VBUS_DETECT[3]
is set to 1’b1
|
VBUSVALID_OVERRIDE_W | Field VBUSVALID_OVERRIDE writer - Override value for VBUS_VALID signal sent to USB controller The bit field provides the value for VBUS_VALID reported to the USB controller if the value of USB1_VBUS_DETECT[3]
is set to 1’b1
|
VBUSVALID_SEL_R | Field VBUSVALID_SEL reader - Selects the source of the VBUS_VALID signal reported to the USB controller This is one of the bit fields that selects the source of the VBUS_VALID signal reported to the USB controller
|
VBUSVALID_SEL_W | Field VBUSVALID_SEL writer - Selects the source of the VBUS_VALID signal reported to the USB controller This is one of the bit fields that selects the source of the VBUS_VALID signal reported to the USB controller
|
VBUSVALID_THRESH_R | Field VBUSVALID_THRESH reader - Sets the threshold for the VBUSVALID comparator
|
VBUSVALID_THRESH_W | Field VBUSVALID_THRESH writer - Sets the threshold for the VBUSVALID comparator
|
VBUSVALID_TO_SESSVALID_R | Field VBUSVALID_TO_SESSVALID reader - Selects the comparator used for VBUS_VALID This bit field controls the comparator used to report the VBUS_VALID results in USB1_VBUS_DETECT[3]
between the VBUS_VALID comparator and the Session Valid comparator
|
VBUSVALID_TO_SESSVALID_W | Field VBUSVALID_TO_SESSVALID writer - Selects the comparator used for VBUS_VALID This bit field controls the comparator used to report the VBUS_VALID results in USB1_VBUS_DETECT[3]
between the VBUS_VALID comparator and the Session Valid comparator
|
VBUS_OVERRIDE_EN_R | Field VBUS_OVERRIDE_EN reader - VBUS detect signal override enable
|
VBUS_OVERRIDE_EN_W | Field VBUS_OVERRIDE_EN writer - VBUS detect signal override enable
|
VBUS_SOURCE_SEL_R | Field VBUS_SOURCE_SEL reader - Selects the source of the VBUS_VALID signal reported to the USB controller This is one of the bit fields that selects the source of the VBUS_VALID signal reported to the USB controller
|
VBUS_SOURCE_SEL_W | Field VBUS_SOURCE_SEL writer - Selects the source of the VBUS_VALID signal reported to the USB controller This is one of the bit fields that selects the source of the VBUS_VALID signal reported to the USB controller
|
W | Register USB1_VBUS_DETECT_CLR writer
|
DISCHARGE_VBUS_A | Controls VBUS discharge resistor This bit field controls a nominal 22kohm resistor between the USB1_VBUS pin and ground
|
EXT_ID_OVERRIDE_EN_A | Enable ID override using the pinmuxed value:
|
EXT_VBUS_OVERRIDE_EN_A | Enable VBUS override using the pin muxed value.
|
PWRUP_CMPS_A | Enables the VBUS_VALID comparator: Powers up the comparator used for the VBUS_VALID detector
|
VBUSVALID_SEL_A | Selects the source of the VBUS_VALID signal reported to the USB controller This is one of the bit fields that selects the source of the VBUS_VALID signal reported to the USB controller
|
VBUSVALID_THRESH_A | Sets the threshold for the VBUSVALID comparator
|
VBUSVALID_TO_SESSVALID_A | Selects the comparator used for VBUS_VALID This bit field controls the comparator used to report the VBUS_VALID results in USB1_VBUS_DETECT[3]
between the VBUS_VALID comparator and the Session Valid comparator
|
VBUS_OVERRIDE_EN_A | VBUS detect signal override enable
|
VBUS_SOURCE_SEL_A | Selects the source of the VBUS_VALID signal reported to the USB controller This is one of the bit fields that selects the source of the VBUS_VALID signal reported to the USB controller
|