Digital I/O control for port 0 pins PIO0_14
DIGIMODE_R | Field DIGIMODE reader - Select Digital mode.
|
DIGIMODE_W | Field DIGIMODE writer - Select Digital mode.
|
ECS_R | Field ECS reader - Pull-up current source enable in I2C mode.
|
ECS_W | Field ECS writer - Pull-up current source enable in I2C mode.
|
EGP_R | Field EGP reader - Switch between GPIO mode and I2C mode.
|
EGP_W | Field EGP writer - Switch between GPIO mode and I2C mode.
|
FILTEROFF_R | Field FILTEROFF reader - Controls input glitch filter.
|
FILTEROFF_W | Field FILTEROFF writer - Controls input glitch filter.
|
FUNC_R | Field FUNC reader - Selects pin function.
|
FUNC_W | Field FUNC writer - Selects pin function.
|
I2CFILTER_R | Field I2CFILTER reader - Configures I2C features for standard mode, fast mode, and Fast Mode Plus operation and High-Speed mode operation.
|
I2CFILTER_W | Field I2CFILTER writer - Configures I2C features for standard mode, fast mode, and Fast Mode Plus operation and High-Speed mode operation.
|
INVERT_R | Field INVERT reader - Input polarity.
|
INVERT_W | Field INVERT writer - Input polarity.
|
MODE_R | Field MODE reader - Selects function mode (on-chip pull-up/pull-down resistor control).
|
MODE_W | Field MODE writer - Selects function mode (on-chip pull-up/pull-down resistor control).
|
OD_R | Field OD reader - Controls open-drain mode in standard GPIO mode (EGP = 1). This bit has no effect in I2C mode (EGP=0).
|
OD_W | Field OD writer - Controls open-drain mode in standard GPIO mode (EGP = 1). This bit has no effect in I2C mode (EGP=0).
|
PIO0_14_SPEC | Digital I/O control for port 0 pins PIO0_14
|
R | Register PIO0_14 reader
|
SLEW_R | Field SLEW reader - Driver slew rate.
|
SLEW_W | Field SLEW writer - Driver slew rate.
|
SSEL_R | Field SSEL reader - Supply Selection bit.
|
SSEL_W | Field SSEL writer - Supply Selection bit.
|
W | Register PIO0_14 writer
|
DIGIMODE_A | Select Digital mode.
|
ECS_A | Pull-up current source enable in I2C mode.
|
EGP_A | Switch between GPIO mode and I2C mode.
|
FILTEROFF_A | Controls input glitch filter.
|
FUNC_A | Selects pin function.
|
I2CFILTER_A | Configures I2C features for standard mode, fast mode, and Fast Mode Plus operation and High-Speed mode operation.
|
INVERT_A | Input polarity.
|
MODE_A | Selects function mode (on-chip pull-up/pull-down resistor control).
|
OD_A | Controls open-drain mode in standard GPIO mode (EGP = 1). This bit has no effect in I2C mode (EGP=0).
|
SLEW_A | Driver slew rate.
|
SSEL_A | Supply Selection bit.
|