Digital I/O control for port 0 pins PIO0_13
| DIGIMODE_R | Field DIGIMODE reader - Select Digital mode.
|
| DIGIMODE_W | Field DIGIMODE writer - Select Digital mode.
|
| ECS_R | Field ECS reader - Pull-up current source enable in I2C mode.
|
| ECS_W | Field ECS writer - Pull-up current source enable in I2C mode.
|
| EGP_R | Field EGP reader - Switch between GPIO mode and I2C mode.
|
| EGP_W | Field EGP writer - Switch between GPIO mode and I2C mode.
|
| FILTEROFF_R | Field FILTEROFF reader - Controls input glitch filter.
|
| FILTEROFF_W | Field FILTEROFF writer - Controls input glitch filter.
|
| FUNC_R | Field FUNC reader - Selects pin function.
|
| FUNC_W | Field FUNC writer - Selects pin function.
|
| I2CFILTER_R | Field I2CFILTER reader - Configures I2C features for standard mode, fast mode, and Fast Mode Plus operation and High-Speed mode operation.
|
| I2CFILTER_W | Field I2CFILTER writer - Configures I2C features for standard mode, fast mode, and Fast Mode Plus operation and High-Speed mode operation.
|
| INVERT_R | Field INVERT reader - Input polarity.
|
| INVERT_W | Field INVERT writer - Input polarity.
|
| MODE_R | Field MODE reader - Selects function mode (on-chip pull-up/pull-down resistor control).
|
| MODE_W | Field MODE writer - Selects function mode (on-chip pull-up/pull-down resistor control).
|
| OD_R | Field OD reader - Controls open-drain mode in standard GPIO mode (EGP = 1). This bit has no effect in I2C mode (EGP=0).
|
| OD_W | Field OD writer - Controls open-drain mode in standard GPIO mode (EGP = 1). This bit has no effect in I2C mode (EGP=0).
|
| PIO0_13_SPEC | Digital I/O control for port 0 pins PIO0_13
|
| R | Register PIO0_13 reader
|
| SLEW_R | Field SLEW reader - Driver slew rate.
|
| SLEW_W | Field SLEW writer - Driver slew rate.
|
| SSEL_R | Field SSEL reader - Supply Selection bit.
|
| SSEL_W | Field SSEL writer - Supply Selection bit.
|
| W | Register PIO0_13 writer
|
| DIGIMODE_A | Select Digital mode.
|
| ECS_A | Pull-up current source enable in I2C mode.
|
| EGP_A | Switch between GPIO mode and I2C mode.
|
| FILTEROFF_A | Controls input glitch filter.
|
| FUNC_A | Selects pin function.
|
| I2CFILTER_A | Configures I2C features for standard mode, fast mode, and Fast Mode Plus operation and High-Speed mode operation.
|
| INVERT_A | Input polarity.
|
| MODE_A | Selects function mode (on-chip pull-up/pull-down resistor control).
|
| OD_A | Controls open-drain mode in standard GPIO mode (EGP = 1). This bit has no effect in I2C mode (EGP=0).
|
| SLEW_A | Driver slew rate.
|
| SSEL_A | Supply Selection bit.
|