[−][src]Module lpc54606_pac::usbhsh
LPC5460x USB1 High-speed Host Controller
Modules
atl_ptd_base_addr | Memory base address where ATL PTD0 is stored |
atl_ptd_done_map | Done map for each ATL PTD |
atl_ptd_skip_map | Skip map for each ATL PTD |
caplength_chipid | This register contains the offset value towards the start of the operational register space and the version number of the IP block |
data_payload_base_addr | Memory base address that indicates the start of the data payload buffers |
fladj_frindex | Frame Length Adjustment |
hccparams | Host Controller Capability Parameters |
hcsparams | Host Controller Structural Parameters |
int_ptd_base_addr | Memory base address where INT PTD0 is stored |
int_ptd_done_map | Done map for each INT PTD |
int_ptd_skip_map | Skip map for each INT PTD |
iso_ptd_base_addr | Memory base address where ISO PTD0 is stored |
iso_ptd_done_map | Done map for each ISO PTD |
iso_ptd_skip_map | Skip map for each ISO PTD |
last_ptd_inuse | Marks the last PTD in the list for ISO, INT and ATL |
portmode | Controls the port if it is attached to the host block or the device block |
portsc1 | Port Status and Control register |
usbcmd | USB Command register |
usbintr | USB Interrupt Enable register |
usbsts | USB Interrupt Status register |
utmiplus_ulpi_debug | Register to read/write registers in the attached USB PHY |
Structs
RegisterBlock | Register block |
Type Definitions
ATL_PTD_BASE_ADDR | Memory base address where ATL PTD0 is stored |
ATL_PTD_DONE_MAP | Done map for each ATL PTD |
ATL_PTD_SKIP_MAP | Skip map for each ATL PTD |
CAPLENGTH_CHIPID | This register contains the offset value towards the start of the operational register space and the version number of the IP block |
DATA_PAYLOAD_BASE_ADDR | Memory base address that indicates the start of the data payload buffers |
FLADJ_FRINDEX | Frame Length Adjustment |
HCCPARAMS | Host Controller Capability Parameters |
HCSPARAMS | Host Controller Structural Parameters |
INT_PTD_BASE_ADDR | Memory base address where INT PTD0 is stored |
INT_PTD_DONE_MAP | Done map for each INT PTD |
INT_PTD_SKIP_MAP | Skip map for each INT PTD |
ISO_PTD_BASE_ADDR | Memory base address where ISO PTD0 is stored |
ISO_PTD_DONE_MAP | Done map for each ISO PTD |
ISO_PTD_SKIP_MAP | Skip map for each ISO PTD |
LAST_PTD_INUSE | Marks the last PTD in the list for ISO, INT and ATL |
PORTMODE | Controls the port if it is attached to the host block or the device block |
PORTSC1 | Port Status and Control register |
USBCMD | USB Command register |
USBINTR | USB Interrupt Enable register |
USBSTS | USB Interrupt Status register |
UTMIPLUS_ULPI_DEBUG | Register to read/write registers in the attached USB PHY |