kcl_lib/std/

extrude.rs

//! Functions related to extruding.

use std::collections::HashMap;

use anyhow::Result;
use indexmap::IndexMap;
use kcmc::ModelingCmd;
use kcmc::each_cmd as mcmd;
use kcmc::length_unit::LengthUnit;
use kcmc::ok_response::OkModelingCmdResponse;
use kcmc::output::ExtrusionFaceInfo;
use kcmc::shared::ExtrudeReference;
use kcmc::shared::ExtrusionFaceCapType;
use kcmc::shared::Opposite;
use kcmc::shared::Point3d as KPoint3d; // Point3d is already defined in this pkg, to impl ts_rs traits.
use kcmc::websocket::ModelingCmdReq;
use kcmc::websocket::OkWebSocketResponseData;
use kittycad_modeling_cmds::shared::Angle;
use kittycad_modeling_cmds::shared::BodyType;
use kittycad_modeling_cmds::shared::ExtrudeMethod;
use kittycad_modeling_cmds::shared::Point2d;
use kittycad_modeling_cmds::{self as kcmc};
use uuid::Uuid;

use super::DEFAULT_TOLERANCE_MM;
use super::args::TyF64;
use super::utils::point_to_mm;
use crate::errors::KclError;
use crate::errors::KclErrorDetails;
use crate::execution::ArtifactId;
use crate::execution::CreatorFace;
use crate::execution::ExecState;
use crate::execution::ExecutorContext;
use crate::execution::Extrudable;
use crate::execution::ExtrudeSurface;
use crate::execution::GeoMeta;
use crate::execution::KclValue;
use crate::execution::ModelingCmdMeta;
use crate::execution::Path;
use crate::execution::ProfileClosed;
use crate::execution::Segment;
use crate::execution::SegmentKind;
use crate::execution::Sketch;
use crate::execution::SketchSurface;
use crate::execution::Solid;
use crate::execution::SolidCreator;
use crate::execution::annotations;
use crate::execution::types::ArrayLen;
use crate::execution::types::PrimitiveType;
use crate::execution::types::RuntimeType;
use crate::parsing::ast::types::TagDeclarator;
use crate::parsing::ast::types::TagNode;
use crate::std::Args;
use crate::std::args::FromKclValue;
use crate::std::axis_or_reference::Point3dAxis3dOrGeometryReference;
use crate::std::solver::create_segments_in_engine;

/// Extrudes by a given amount.
pub async fn extrude(exec_state: &mut ExecState, args: Args) -> Result<KclValue, KclError> {
    let sketch_values: Vec<KclValue> = args.get_unlabeled_kw_arg(
        "sketches",
        &RuntimeType::Array(
            Box::new(RuntimeType::Union(vec![
                RuntimeType::sketch(),
                RuntimeType::face(),
                RuntimeType::tagged_face(),
                RuntimeType::segment(),
            ])),
            ArrayLen::Minimum(1),
        ),
        exec_state,
    )?;

    let length: Option<TyF64> = args.get_kw_arg_opt("length", &RuntimeType::length(), exec_state)?;
    let to = args.get_kw_arg_opt(
        "to",
        &RuntimeType::Union(vec![
            RuntimeType::point3d(),
            RuntimeType::Primitive(PrimitiveType::Axis3d),
            RuntimeType::Primitive(PrimitiveType::Edge),
            RuntimeType::plane(),
            RuntimeType::Primitive(PrimitiveType::Face),
            RuntimeType::sketch(),
            RuntimeType::Primitive(PrimitiveType::Solid),
            RuntimeType::tagged_edge(),
            RuntimeType::tagged_face(),
        ]),
        exec_state,
    )?;
    let symmetric = args.get_kw_arg_opt("symmetric", &RuntimeType::bool(), exec_state)?;
    let bidirectional_length: Option<TyF64> =
        args.get_kw_arg_opt("bidirectionalLength", &RuntimeType::length(), exec_state)?;
    let tag_start = args.get_kw_arg_opt("tagStart", &RuntimeType::tag_decl(), exec_state)?;
    let tag_end = args.get_kw_arg_opt("tagEnd", &RuntimeType::tag_decl(), exec_state)?;
    let twist_angle: Option<TyF64> = args.get_kw_arg_opt("twistAngle", &RuntimeType::degrees(), exec_state)?;
    let twist_angle_step: Option<TyF64> = args.get_kw_arg_opt("twistAngleStep", &RuntimeType::degrees(), exec_state)?;
    let twist_center: Option<[TyF64; 2]> = args.get_kw_arg_opt("twistCenter", &RuntimeType::point2d(), exec_state)?;
    let tolerance: Option<TyF64> = args.get_kw_arg_opt("tolerance", &RuntimeType::length(), exec_state)?;
    let method: Option<String> = args.get_kw_arg_opt("method", &RuntimeType::string(), exec_state)?;
    let hide_seams: Option<bool> = args.get_kw_arg_opt("hideSeams", &RuntimeType::bool(), exec_state)?;
    let body_type: Option<BodyType> = args.get_kw_arg_opt("bodyType", &RuntimeType::string(), exec_state)?;
    let sketches = coerce_extrude_targets(
        sketch_values,
        body_type.unwrap_or_default(),
        tag_start.as_ref(),
        tag_end.as_ref(),
        exec_state,
        &args.ctx,
        args.source_range,
    )
    .await?;

    let result = inner_extrude(
        sketches,
        length,
        to,
        symmetric,
        bidirectional_length,
        tag_start,
        tag_end,
        twist_angle,
        twist_angle_step,
        twist_center,
        tolerance,
        method,
        hide_seams,
        body_type,
        exec_state,
        args,
    )
    .await?;

    Ok(result.into())
}

async fn coerce_extrude_targets(
    sketch_values: Vec<KclValue>,
    body_type: BodyType,
    tag_start: Option<&TagNode>,
    tag_end: Option<&TagNode>,
    exec_state: &mut ExecState,
    ctx: &ExecutorContext,
    source_range: crate::SourceRange,
) -> Result<Vec<Extrudable>, KclError> {
    let mut extrudables = Vec::new();
    let mut segments = Vec::new();

    for value in sketch_values {
        if let Some(segment) = value.clone().into_segment() {
            segments.push(segment);
            continue;
        }

        let Some(extrudable) = Extrudable::from_kcl_val(&value) else {
            return Err(KclError::new_type(KclErrorDetails::new(
                "Expected sketches, faces, tagged faces, or solved sketch segments for extrusion.".to_owned(),
                vec![source_range],
            )));
        };
        extrudables.push(extrudable);
    }

    if !segments.is_empty() && !extrudables.is_empty() {
        return Err(KclError::new_semantic(KclErrorDetails::new(
            "Cannot extrude sketch segments together with sketches or faces in the same call. Use separate `extrude()` calls.".to_owned(),
            vec![source_range],
        )));
    }

    if !segments.is_empty() {
        if !matches!(body_type, BodyType::Surface) {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "Extruding sketch segments is only supported for surface extrudes. Set `bodyType = SURFACE`."
                    .to_owned(),
                vec![source_range],
            )));
        }

        if tag_start.is_some() || tag_end.is_some() {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "`tagStart` and `tagEnd` are not supported when extruding sketch segments. Segment surface extrudes do not create start or end caps."
                    .to_owned(),
                vec![source_range],
            )));
        }

        let synthetic_sketch = build_segment_surface_sketch(segments, exec_state, ctx, source_range).await?;
        return Ok(vec![Extrudable::from(synthetic_sketch)]);
    }

    Ok(extrudables)
}

pub(crate) async fn build_segment_surface_sketch(
    mut segments: Vec<Segment>,
    exec_state: &mut ExecState,
    ctx: &ExecutorContext,
    source_range: crate::SourceRange,
) -> Result<Sketch, KclError> {
    let Some(first_segment) = segments.first() else {
        return Err(KclError::new_semantic(KclErrorDetails::new(
            "Expected at least one sketch segment.".to_owned(),
            vec![source_range],
        )));
    };

    let sketch_id = first_segment.sketch_id;
    let sketch_surface = first_segment.surface.clone();
    for segment in &segments {
        if segment.sketch_id != sketch_id {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "All sketch segments passed to this operation must come from the same sketch.".to_owned(),
                vec![source_range],
            )));
        }

        if segment.surface != sketch_surface {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "All sketch segments passed to this operation must lie on the same sketch surface.".to_owned(),
                vec![source_range],
            )));
        }

        if matches!(segment.kind, SegmentKind::Point { .. }) {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "Point segments cannot be used here. Select line, arc, or circle segments instead.".to_owned(),
                vec![source_range],
            )));
        }

        if segment.is_construction() {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "Construction segments cannot be used here. Select non-construction sketch segments instead."
                    .to_owned(),
                vec![source_range],
            )));
        }
    }

    let synthetic_sketch_id = exec_state.next_uuid();
    let segment_tags = IndexMap::from_iter(segments.iter().filter_map(|segment| {
        segment
            .tag
            .as_ref()
            .map(|tag| (segment.object_id, TagDeclarator::new(&tag.value)))
    }));

    for segment in &mut segments {
        segment.id = exec_state.next_uuid();
        segment.sketch_id = synthetic_sketch_id;
        segment.sketch = None;
    }

    create_segments_in_engine(
        &sketch_surface,
        synthetic_sketch_id,
        &mut segments,
        &segment_tags,
        ctx,
        exec_state,
        source_range,
    )
    .await?
    .ok_or_else(|| {
        KclError::new_semantic(KclErrorDetails::new(
            "Expected at least one usable sketch segment.".to_owned(),
            vec![source_range],
        ))
    })
}

#[allow(clippy::too_many_arguments)]
async fn inner_extrude(
    extrudables: Vec<Extrudable>,
    length: Option<TyF64>,
    to: Option<Point3dAxis3dOrGeometryReference>,
    symmetric: Option<bool>,
    bidirectional_length: Option<TyF64>,
    tag_start: Option<TagNode>,
    tag_end: Option<TagNode>,
    twist_angle: Option<TyF64>,
    twist_angle_step: Option<TyF64>,
    twist_center: Option<[TyF64; 2]>,
    tolerance: Option<TyF64>,
    method: Option<String>,
    hide_seams: Option<bool>,
    body_type: Option<BodyType>,
    exec_state: &mut ExecState,
    args: Args,
) -> Result<Vec<Solid>, KclError> {
    let body_type = body_type.unwrap_or_default();

    if matches!(body_type, BodyType::Solid) && extrudables.iter().any(|sk| matches!(sk.is_closed(), ProfileClosed::No))
    {
        return Err(KclError::new_semantic(KclErrorDetails::new(
            "Cannot solid extrude an open profile. Either close the profile, or use a surface extrude.".to_owned(),
            vec![args.source_range],
        )));
    }

    // Extrude the element(s).
    let mut solids = Vec::new();
    let tolerance = LengthUnit(tolerance.as_ref().map(|t| t.to_mm()).unwrap_or(DEFAULT_TOLERANCE_MM));

    let extrude_method = match method.as_deref() {
        Some("new" | "NEW") => ExtrudeMethod::New,
        Some("merge" | "MERGE") => ExtrudeMethod::Merge,
        None => ExtrudeMethod::default(),
        Some(other) => {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                format!("Unknown merge method {other}, try using `MERGE` or `NEW`"),
                vec![args.source_range],
            )));
        }
    };

    if symmetric.unwrap_or(false) && bidirectional_length.is_some() {
        return Err(KclError::new_semantic(KclErrorDetails::new(
            "You cannot give both `symmetric` and `bidirectional` params, you have to choose one or the other"
                .to_owned(),
            vec![args.source_range],
        )));
    }

    if (length.is_some() || twist_angle.is_some()) && to.is_some() {
        return Err(KclError::new_semantic(KclErrorDetails::new(
            "You cannot give `length` or `twist` params with the `to` param, you have to choose one or the other"
                .to_owned(),
            vec![args.source_range],
        )));
    }

    let bidirection = bidirectional_length.map(|l| LengthUnit(l.to_mm()));

    let opposite = match (symmetric, bidirection) {
        (Some(true), _) => Opposite::Symmetric,
        (None, None) => Opposite::None,
        (Some(false), None) => Opposite::None,
        (None, Some(length)) => Opposite::Other(length),
        (Some(false), Some(length)) => Opposite::Other(length),
    };

    for extrudable in &extrudables {
        let extrude_cmd_id = exec_state.next_uuid();
        let sketch_or_face_id = extrudable.id_to_extrude(exec_state, &args, false).await?;
        let cmd = match (&twist_angle, &twist_angle_step, &twist_center, length.clone(), &to) {
            (Some(angle), angle_step, center, Some(length), None) => {
                let center = center.clone().map(point_to_mm).map(Point2d::from).unwrap_or_default();
                let total_rotation_angle = Angle::from_degrees(angle.to_degrees(exec_state, args.source_range));
                let angle_step_size = Angle::from_degrees(
                    angle_step
                        .clone()
                        .map(|a| a.to_degrees(exec_state, args.source_range))
                        .unwrap_or(15.0),
                );
                ModelingCmd::from(
                    mcmd::TwistExtrude::builder()
                        .target(sketch_or_face_id.into())
                        .distance(LengthUnit(length.to_mm()))
                        .center_2d(center)
                        .total_rotation_angle(total_rotation_angle)
                        .angle_step_size(angle_step_size)
                        .tolerance(tolerance)
                        .body_type(body_type)
                        .build(),
                )
            }
            (None, None, None, Some(length), None) => ModelingCmd::from(
                mcmd::Extrude::builder()
                    .target(sketch_or_face_id.into())
                    .distance(LengthUnit(length.to_mm()))
                    .opposite(opposite.clone())
                    .extrude_method(extrude_method)
                    .body_type(body_type)
                    .maybe_merge_coplanar_faces(hide_seams)
                    .build(),
            ),
            (None, None, None, None, Some(to)) => match to {
                Point3dAxis3dOrGeometryReference::Point(point) => ModelingCmd::from(
                    mcmd::ExtrudeToReference::builder()
                        .target(sketch_or_face_id.into())
                        .reference(ExtrudeReference::Point {
                            point: KPoint3d {
                                x: LengthUnit(point[0].to_mm()),
                                y: LengthUnit(point[1].to_mm()),
                                z: LengthUnit(point[2].to_mm()),
                            },
                        })
                        .extrude_method(extrude_method)
                        .body_type(body_type)
                        .build(),
                ),
                Point3dAxis3dOrGeometryReference::Axis { direction, origin } => ModelingCmd::from(
                    mcmd::ExtrudeToReference::builder()
                        .target(sketch_or_face_id.into())
                        .reference(ExtrudeReference::Axis {
                            axis: KPoint3d {
                                x: direction[0].to_mm(),
                                y: direction[1].to_mm(),
                                z: direction[2].to_mm(),
                            },
                            point: KPoint3d {
                                x: LengthUnit(origin[0].to_mm()),
                                y: LengthUnit(origin[1].to_mm()),
                                z: LengthUnit(origin[2].to_mm()),
                            },
                        })
                        .extrude_method(extrude_method)
                        .body_type(body_type)
                        .build(),
                ),
                Point3dAxis3dOrGeometryReference::Plane(plane) => {
                    let plane_id = if plane.is_uninitialized() {
                        if plane.info.origin.units.is_none() {
                            return Err(KclError::new_semantic(KclErrorDetails::new(
                                "Origin of plane has unknown units".to_string(),
                                vec![args.source_range],
                            )));
                        }
                        let sketch_plane = crate::std::sketch::make_sketch_plane_from_orientation(
                            plane.clone().info.into_plane_data(),
                            exec_state,
                            &args,
                        )
                        .await?;
                        sketch_plane.id
                    } else {
                        plane.id
                    };
                    ModelingCmd::from(
                        mcmd::ExtrudeToReference::builder()
                            .target(sketch_or_face_id.into())
                            .reference(ExtrudeReference::EntityReference {
                                entity_id: Some(plane_id),
                                entity_reference: None,
                            })
                            .extrude_method(extrude_method)
                            .body_type(body_type)
                            .build(),
                    )
                }
                Point3dAxis3dOrGeometryReference::Edge(edge_ref) => {
                    let edge_id = edge_ref.get_engine_id(exec_state, &args)?;
                    ModelingCmd::from(
                        mcmd::ExtrudeToReference::builder()
                            .target(sketch_or_face_id.into())
                            .reference(ExtrudeReference::EntityReference {
                                entity_id: Some(edge_id),
                                entity_reference: None,
                            })
                            .extrude_method(extrude_method)
                            .body_type(body_type)
                            .build(),
                    )
                }
                Point3dAxis3dOrGeometryReference::Face(face_tag) => {
                    let face_id = face_tag.get_face_id_from_tag(exec_state, &args, false).await?;
                    ModelingCmd::from(
                        mcmd::ExtrudeToReference::builder()
                            .target(sketch_or_face_id.into())
                            .reference(ExtrudeReference::EntityReference {
                                entity_id: Some(face_id),
                                entity_reference: None,
                            })
                            .extrude_method(extrude_method)
                            .body_type(body_type)
                            .build(),
                    )
                }
                Point3dAxis3dOrGeometryReference::Sketch(sketch_ref) => ModelingCmd::from(
                    mcmd::ExtrudeToReference::builder()
                        .target(sketch_or_face_id.into())
                        .reference(ExtrudeReference::EntityReference {
                            entity_id: Some(sketch_ref.id),
                            entity_reference: None,
                        })
                        .extrude_method(extrude_method)
                        .body_type(body_type)
                        .build(),
                ),
                Point3dAxis3dOrGeometryReference::Solid(solid) => ModelingCmd::from(
                    mcmd::ExtrudeToReference::builder()
                        .target(sketch_or_face_id.into())
                        .reference(ExtrudeReference::EntityReference {
                            entity_id: Some(solid.id),
                            entity_reference: None,
                        })
                        .extrude_method(extrude_method)
                        .body_type(body_type)
                        .build(),
                ),
                Point3dAxis3dOrGeometryReference::TaggedEdgeOrFace(tag) => {
                    let tagged_edge_or_face = args.get_tag_engine_info(exec_state, tag)?;
                    let tagged_edge_or_face_id = tagged_edge_or_face.id;
                    ModelingCmd::from(
                        mcmd::ExtrudeToReference::builder()
                            .target(sketch_or_face_id.into())
                            .reference(ExtrudeReference::EntityReference {
                                entity_id: Some(tagged_edge_or_face_id),
                                entity_reference: None,
                            })
                            .extrude_method(extrude_method)
                            .body_type(body_type)
                            .build(),
                    )
                }
            },
            (Some(_), _, _, None, None) => {
                return Err(KclError::new_semantic(KclErrorDetails::new(
                    "The `length` parameter must be provided when using twist angle for extrusion.".to_owned(),
                    vec![args.source_range],
                )));
            }
            (_, _, _, None, None) => {
                return Err(KclError::new_semantic(KclErrorDetails::new(
                    "Either `length` or `to` parameter must be provided for extrusion.".to_owned(),
                    vec![args.source_range],
                )));
            }
            (_, _, _, Some(_), Some(_)) => {
                return Err(KclError::new_semantic(KclErrorDetails::new(
                    "You cannot give both `length` and `to` params, you have to choose one or the other".to_owned(),
                    vec![args.source_range],
                )));
            }
            (_, _, _, _, _) => {
                return Err(KclError::new_semantic(KclErrorDetails::new(
                    "Invalid combination of parameters for extrusion.".to_owned(),
                    vec![args.source_range],
                )));
            }
        };

        let being_extruded = match extrudable {
            Extrudable::Sketch(..) => BeingExtruded::Sketch,
            Extrudable::Face(face_tag) => {
                let face_id = sketch_or_face_id;
                let solid_id = match face_tag.geometry() {
                    Some(crate::execution::Geometry::Solid(solid)) => solid.id,
                    Some(crate::execution::Geometry::Sketch(sketch)) => match sketch.on {
                        SketchSurface::Face(face) => face.parent_solid.solid_id,
                        SketchSurface::Plane(_) => sketch.id,
                    },
                    None => face_id,
                };
                BeingExtruded::Face { face_id, solid_id }
            }
        };
        if let Some(post_extr_sketch) = extrudable.as_sketch() {
            let cmds = post_extr_sketch.build_sketch_mode_cmds(
                exec_state,
                ModelingCmdReq {
                    cmd_id: extrude_cmd_id.into(),
                    cmd,
                },
            );
            exec_state
                .batch_modeling_cmds(ModelingCmdMeta::from_args_id(exec_state, &args, extrude_cmd_id), &cmds)
                .await?;
            solids.push(
                do_post_extrude(
                    &post_extr_sketch,
                    extrude_cmd_id.into(),
                    false,
                    &NamedCapTags {
                        start: tag_start.as_ref(),
                        end: tag_end.as_ref(),
                    },
                    extrude_method,
                    exec_state,
                    &args,
                    None,
                    None,
                    body_type,
                    being_extruded,
                )
                .await?,
            );
        } else {
            return Err(KclError::new_type(KclErrorDetails::new(
                "Expected a sketch for extrusion".to_owned(),
                vec![args.source_range],
            )));
        }
    }

    Ok(solids)
}

#[derive(Debug, Default)]
pub(crate) struct NamedCapTags<'a> {
    pub start: Option<&'a TagNode>,
    pub end: Option<&'a TagNode>,
}

#[derive(Debug, Clone, Copy)]
pub enum BeingExtruded {
    Sketch,
    Face { face_id: Uuid, solid_id: Uuid },
}

#[allow(clippy::too_many_arguments)]
pub(crate) async fn do_post_extrude<'a>(
    sketch: &Sketch,
    extrude_cmd_id: ArtifactId,
    sectional: bool,
    named_cap_tags: &'a NamedCapTags<'a>,
    extrude_method: ExtrudeMethod,
    exec_state: &mut ExecState,
    args: &Args,
    edge_id: Option<Uuid>,
    clone_id_map: Option<&HashMap<Uuid, Uuid>>, // old sketch id -> new sketch id
    body_type: BodyType,
    being_extruded: BeingExtruded,
) -> Result<Solid, KclError> {
    // Bring the object to the front of the scene.
    // See: https://github.com/KittyCAD/modeling-app/issues/806

    exec_state
        .batch_modeling_cmd(
            ModelingCmdMeta::from_args(exec_state, args),
            ModelingCmd::from(mcmd::ObjectBringToFront::builder().object_id(sketch.id).build()),
        )
        .await?;

    let any_edge_id = if let Some(edge_id) = sketch.mirror {
        edge_id
    } else if let Some(id) = edge_id {
        id
    } else {
        // The "get extrusion face info" API call requires *any* edge on the sketch being extruded.
        // So, let's just use the first one.
        let Some(any_edge_id) = sketch.paths.first().map(|edge| edge.get_base().geo_meta.id) else {
            return Err(KclError::new_type(KclErrorDetails::new(
                "Expected a non-empty sketch".to_owned(),
                vec![args.source_range],
            )));
        };
        any_edge_id
    };

    // If the sketch is a clone, we will use the original info to get the extrusion face info.
    let mut extrusion_info_edge_id = any_edge_id;
    if sketch.clone.is_some() && clone_id_map.is_some() {
        extrusion_info_edge_id = if let Some(clone_map) = clone_id_map {
            if let Some(new_edge_id) = clone_map.get(&extrusion_info_edge_id) {
                *new_edge_id
            } else {
                extrusion_info_edge_id
            }
        } else {
            any_edge_id
        };
    }

    let mut sketch = sketch.clone();
    match body_type {
        BodyType::Solid => {
            sketch.is_closed = ProfileClosed::Explicitly;
        }
        BodyType::Surface => {}
        _other => {
            // At some point in the future we'll add sheet metal or something.
            // Figure this out then.
        }
    }

    match (extrude_method, being_extruded) {
        (ExtrudeMethod::Merge, BeingExtruded::Face { .. }) => {
            // Merge the IDs.
            // If we were sketching on a face, we need the original face id.
            if let SketchSurface::Face(ref face) = sketch.on {
                // If we're merging into an existing body, then assign the existing body's ID,
                // because the variable binding for this solid won't be its own object, it's just modifying the original one.
                sketch.id = face.parent_solid.sketch_or_solid_id();
            }
        }
        (ExtrudeMethod::New, BeingExtruded::Face { .. }) => {
            // We're creating a new solid, it's not based on any existing sketch (it's based on a face).
            // So we need a new ID, the extrude command ID.
            sketch.id = extrude_cmd_id.into();
        }
        (ExtrudeMethod::New, BeingExtruded::Sketch) => {
            // If we are creating a new body we need to preserve its new id.
            // The sketch's ID is already correct here, it should be the ID of the sketch.
        }
        (ExtrudeMethod::Merge, BeingExtruded::Sketch) => {
            if let SketchSurface::Face(ref face) = sketch.on {
                // If we're merging into an existing body, then assign the existing body's ID,
                // because the variable binding for this solid won't be its own object, it's just modifying the original one.
                sketch.id = face.parent_solid.sketch_or_solid_id();
            }
        }
        (other, _) => {
            // If you ever hit this, you should add a new arm to the match expression, and implement support for the new ExtrudeMethod variant.
            return Err(KclError::new_internal(KclErrorDetails::new(
                format!("Zoo does not yet support creating bodies via {other:?}"),
                vec![args.source_range],
            )));
        }
    }

    // Similarly, if the sketch is a clone, we need to use the original sketch id to get the extrusion face info.
    let sketch_id = if let Some(cloned_from) = sketch.clone
        && clone_id_map.is_some()
    {
        cloned_from
    } else {
        sketch.id
    };

    let solid3d_info = exec_state
        .send_modeling_cmd(
            ModelingCmdMeta::from_args(exec_state, args),
            ModelingCmd::from(
                mcmd::Solid3dGetExtrusionFaceInfo::builder()
                    .edge_id(extrusion_info_edge_id)
                    .object_id(sketch_id)
                    .build(),
            ),
        )
        .await?;

    let face_infos = if let OkWebSocketResponseData::Modeling {
        modeling_response: OkModelingCmdResponse::Solid3dGetExtrusionFaceInfo(data),
    } = solid3d_info
    {
        data.faces
    } else {
        vec![]
    };

    // Only do this if we need the artifact graph.
    #[cfg(feature = "artifact-graph")]
    {
        // Getting the ids of a sectional sweep does not work well and we cannot guarantee that
        // any of these call will not just fail.
        if !sectional {
            exec_state
                .batch_modeling_cmd(
                    ModelingCmdMeta::from_args(exec_state, args),
                    ModelingCmd::from(
                        mcmd::Solid3dGetAdjacencyInfo::builder()
                            .object_id(sketch.id)
                            .edge_id(any_edge_id)
                            .build(),
                    ),
                )
                .await?;
        }
    }

    let Faces {
        sides: mut face_id_map,
        start_cap_id,
        end_cap_id,
    } = analyze_faces(exec_state, args, face_infos).await;

    // If this is a clone, we will use the clone_id_map to map the face info from the original sketch to the clone sketch.
    if sketch.clone.is_some()
        && let Some(clone_id_map) = clone_id_map
    {
        face_id_map = face_id_map
            .into_iter()
            .filter_map(|(k, v)| {
                let fe_key = clone_id_map.get(&k)?;
                let fe_value = clone_id_map.get(&(v?)).copied();
                Some((*fe_key, fe_value))
            })
            .collect::<HashMap<Uuid, Option<Uuid>>>();
    }

    // Iterate over the sketch.value array and add face_id to GeoMeta
    let no_engine_commands = args.ctx.no_engine_commands().await;
    let mut new_value: Vec<ExtrudeSurface> = Vec::with_capacity(sketch.paths.len() + sketch.inner_paths.len() + 2);
    let outer_surfaces = sketch.paths.iter().flat_map(|path| {
        if let Some(Some(actual_face_id)) = face_id_map.get(&path.get_base().geo_meta.id) {
            surface_of(path, *actual_face_id)
        } else if no_engine_commands {
            crate::log::logln!(
                "No face ID found for path ID {:?}, but in no-engine-commands mode, so faking it",
                path.get_base().geo_meta.id
            );
            // Only pre-populate the extrude surface if we are in mock mode.
            fake_extrude_surface(exec_state, path)
        } else if sketch.clone.is_some()
            && let Some(clone_map) = clone_id_map
        {
            let new_path = clone_map.get(&(path.get_base().geo_meta.id));

            if let Some(new_path) = new_path {
                match face_id_map.get(new_path) {
                    Some(Some(actual_face_id)) => clone_surface_of(path, *new_path, *actual_face_id),
                    _ => {
                        let actual_face_id = face_id_map.iter().find_map(|(key, value)| {
                            if let Some(value) = value {
                                if value == new_path { Some(key) } else { None }
                            } else {
                                None
                            }
                        });
                        match actual_face_id {
                            Some(actual_face_id) => clone_surface_of(path, *new_path, *actual_face_id),
                            None => {
                                crate::log::logln!("No face ID found for clone path ID {:?}, so skipping it", new_path);
                                None
                            }
                        }
                    }
                }
            } else {
                None
            }
        } else {
            crate::log::logln!(
                "No face ID found for path ID {:?}, and not in no-engine-commands mode, so skipping it",
                path.get_base().geo_meta.id
            );
            None
        }
    });

    new_value.extend(outer_surfaces);
    let inner_surfaces = sketch.inner_paths.iter().flat_map(|path| {
        if let Some(Some(actual_face_id)) = face_id_map.get(&path.get_base().geo_meta.id) {
            surface_of(path, *actual_face_id)
        } else if no_engine_commands {
            // Only pre-populate the extrude surface if we are in mock mode.
            fake_extrude_surface(exec_state, path)
        } else {
            None
        }
    });
    new_value.extend(inner_surfaces);

    // Add the tags for the start or end caps.
    if let Some(tag_start) = named_cap_tags.start {
        let Some(start_cap_id) = start_cap_id else {
            return Err(KclError::new_type(KclErrorDetails::new(
                format!(
                    "Expected a start cap ID for tag `{}` for extrusion of sketch {:?}",
                    tag_start.name, sketch.id
                ),
                vec![args.source_range],
            )));
        };

        new_value.push(ExtrudeSurface::ExtrudePlane(crate::execution::ExtrudePlane {
            face_id: start_cap_id,
            tag: Some(tag_start.clone()),
            geo_meta: GeoMeta {
                id: start_cap_id,
                metadata: args.source_range.into(),
            },
        }));
    }
    if let Some(tag_end) = named_cap_tags.end {
        let Some(end_cap_id) = end_cap_id else {
            return Err(KclError::new_type(KclErrorDetails::new(
                format!(
                    "Expected an end cap ID for tag `{}` for extrusion of sketch {:?}",
                    tag_end.name, sketch.id
                ),
                vec![args.source_range],
            )));
        };

        new_value.push(ExtrudeSurface::ExtrudePlane(crate::execution::ExtrudePlane {
            face_id: end_cap_id,
            tag: Some(tag_end.clone()),
            geo_meta: GeoMeta {
                id: end_cap_id,
                metadata: args.source_range.into(),
            },
        }));
    }

    let meta = sketch.meta.clone();
    let units = sketch.units;
    let id = sketch.id;
    let creator = match being_extruded {
        BeingExtruded::Sketch => SolidCreator::Sketch(sketch),
        BeingExtruded::Face { face_id, solid_id } => SolidCreator::Face(CreatorFace {
            face_id,
            solid_id,
            sketch,
        }),
    };

    Ok(Solid {
        id,
        artifact_id: extrude_cmd_id,
        value: new_value,
        meta,
        units,
        sectional,
        creator,
        start_cap_id,
        end_cap_id,
        edge_cuts: vec![],
    })
}

#[derive(Default)]
struct Faces {
    /// Maps curve ID to face ID for each side.
    sides: HashMap<Uuid, Option<Uuid>>,
    /// Top face ID.
    end_cap_id: Option<Uuid>,
    /// Bottom face ID.
    start_cap_id: Option<Uuid>,
}

async fn analyze_faces(exec_state: &mut ExecState, args: &Args, face_infos: Vec<ExtrusionFaceInfo>) -> Faces {
    let mut faces = Faces {
        sides: HashMap::with_capacity(face_infos.len()),
        ..Default::default()
    };
    if args.ctx.no_engine_commands().await {
        // Create fake IDs for start and end caps, to make extrudes mock-execute safe
        faces.start_cap_id = Some(exec_state.next_uuid());
        faces.end_cap_id = Some(exec_state.next_uuid());
    }
    for face_info in face_infos {
        match face_info.cap {
            ExtrusionFaceCapType::Bottom => faces.start_cap_id = face_info.face_id,
            ExtrusionFaceCapType::Top => faces.end_cap_id = face_info.face_id,
            ExtrusionFaceCapType::Both => {
                faces.end_cap_id = face_info.face_id;
                faces.start_cap_id = face_info.face_id;
            }
            ExtrusionFaceCapType::None => {
                if let Some(curve_id) = face_info.curve_id {
                    faces.sides.insert(curve_id, face_info.face_id);
                }
            }
            other => {
                exec_state.warn(
                    crate::CompilationIssue {
                        source_range: args.source_range,
                        message: format!("unknown extrusion face type {other:?}"),
                        suggestion: None,
                        severity: crate::errors::Severity::Warning,
                        tag: crate::errors::Tag::Unnecessary,
                    },
                    annotations::WARN_NOT_YET_SUPPORTED,
                );
            }
        }
    }
    faces
}
fn surface_of(path: &Path, actual_face_id: Uuid) -> Option<ExtrudeSurface> {
    match path {
        Path::Arc { .. }
        | Path::TangentialArc { .. }
        | Path::TangentialArcTo { .. }
        // TODO: (bc) fix me
        | Path::Ellipse { .. }
        | Path::Conic {.. }
        | Path::Circle { .. }
        | Path::CircleThreePoint { .. } => {
            let extrude_surface = ExtrudeSurface::ExtrudeArc(crate::execution::ExtrudeArc {
                face_id: actual_face_id,
                tag: path.get_base().tag.clone(),
                geo_meta: GeoMeta {
                    id: path.get_base().geo_meta.id,
                    metadata: path.get_base().geo_meta.metadata,
                },
            });
            Some(extrude_surface)
        }
        Path::Base { .. } | Path::ToPoint { .. } | Path::Horizontal { .. } | Path::AngledLineTo { .. } | Path::Bezier { .. } => {
            let extrude_surface = ExtrudeSurface::ExtrudePlane(crate::execution::ExtrudePlane {
                face_id: actual_face_id,
                tag: path.get_base().tag.clone(),
                geo_meta: GeoMeta {
                    id: path.get_base().geo_meta.id,
                    metadata: path.get_base().geo_meta.metadata,
                },
            });
            Some(extrude_surface)
        }
        Path::ArcThreePoint { .. } => {
            let extrude_surface = ExtrudeSurface::ExtrudeArc(crate::execution::ExtrudeArc {
                face_id: actual_face_id,
                tag: path.get_base().tag.clone(),
                geo_meta: GeoMeta {
                    id: path.get_base().geo_meta.id,
                    metadata: path.get_base().geo_meta.metadata,
                },
            });
            Some(extrude_surface)
        }
    }
}

fn clone_surface_of(path: &Path, clone_path_id: Uuid, actual_face_id: Uuid) -> Option<ExtrudeSurface> {
    match path {
        Path::Arc { .. }
        | Path::TangentialArc { .. }
        | Path::TangentialArcTo { .. }
        // TODO: (gserena) fix me
        | Path::Ellipse { .. }
        | Path::Conic {.. }
        | Path::Circle { .. }
        | Path::CircleThreePoint { .. } => {
            let extrude_surface = ExtrudeSurface::ExtrudeArc(crate::execution::ExtrudeArc {
                face_id: actual_face_id,
                tag: path.get_base().tag.clone(),
                geo_meta: GeoMeta {
                    id: clone_path_id,
                    metadata: path.get_base().geo_meta.metadata,
                },
            });
            Some(extrude_surface)
        }
        Path::Base { .. } | Path::ToPoint { .. } | Path::Horizontal { .. } | Path::AngledLineTo { .. } | Path::Bezier { .. } => {
            let extrude_surface = ExtrudeSurface::ExtrudePlane(crate::execution::ExtrudePlane {
                face_id: actual_face_id,
                tag: path.get_base().tag.clone(),
                geo_meta: GeoMeta {
                    id: clone_path_id,
                    metadata: path.get_base().geo_meta.metadata,
                },
            });
            Some(extrude_surface)
        }
        Path::ArcThreePoint { .. } => {
            let extrude_surface = ExtrudeSurface::ExtrudeArc(crate::execution::ExtrudeArc {
                face_id: actual_face_id,
                tag: path.get_base().tag.clone(),
                geo_meta: GeoMeta {
                    id: clone_path_id,
                    metadata: path.get_base().geo_meta.metadata,
                },
            });
            Some(extrude_surface)
        }
    }
}

/// Create a fake extrude surface to report for mock execution, when there's no engine response.
fn fake_extrude_surface(exec_state: &mut ExecState, path: &Path) -> Option<ExtrudeSurface> {
    let extrude_surface = ExtrudeSurface::ExtrudePlane(crate::execution::ExtrudePlane {
        // pushing this values with a fake face_id to make extrudes mock-execute safe
        face_id: exec_state.next_uuid(),
        tag: path.get_base().tag.clone(),
        geo_meta: GeoMeta {
            id: path.get_base().geo_meta.id,
            metadata: path.get_base().geo_meta.metadata,
        },
    });
    Some(extrude_surface)
}

#[cfg(test)]
mod tests {
    use kittycad_modeling_cmds::units::UnitLength;

    use super::*;
    use crate::execution::AbstractSegment;
    use crate::execution::Plane;
    use crate::execution::SegmentRepr;
    use crate::execution::types::NumericType;
    use crate::front::Expr;
    use crate::front::Number;
    use crate::front::ObjectId;
    use crate::front::Point2d;
    use crate::front::PointCtor;
    use crate::std::sketch::PlaneData;

    fn point_expr(x: f64, y: f64) -> Point2d<Expr> {
        Point2d {
            x: Expr::Var(Number::from((x, UnitLength::Millimeters))),
            y: Expr::Var(Number::from((y, UnitLength::Millimeters))),
        }
    }

    fn segment_value(exec_state: &mut ExecState) -> KclValue {
        let plane = Plane::from_plane_data_skipping_engine(PlaneData::XY, exec_state).unwrap();
        let segment = Segment {
            id: exec_state.next_uuid(),
            object_id: ObjectId(1),
            kind: SegmentKind::Point {
                position: [TyF64::new(0.0, NumericType::mm()), TyF64::new(0.0, NumericType::mm())],
                ctor: Box::new(PointCtor {
                    position: point_expr(0.0, 0.0),
                }),
                freedom: None,
            },
            surface: SketchSurface::Plane(Box::new(plane)),
            sketch_id: exec_state.next_uuid(),
            sketch: None,
            tag: None,
            node_path: None,
            meta: vec![],
        };
        KclValue::Segment {
            value: Box::new(AbstractSegment {
                repr: SegmentRepr::Solved {
                    segment: Box::new(segment),
                },
                meta: vec![],
            }),
        }
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn segment_extrude_rejects_cap_tags() {
        let ctx = ExecutorContext::new_mock(None).await;
        let mut exec_state = ExecState::new(&ctx);
        let err = coerce_extrude_targets(
            vec![segment_value(&mut exec_state)],
            BodyType::Surface,
            Some(&TagDeclarator::new("cap_start")),
            None,
            &mut exec_state,
            &ctx,
            crate::SourceRange::default(),
        )
        .await
        .unwrap_err();

        assert!(
            err.message()
                .contains("`tagStart` and `tagEnd` are not supported when extruding sketch segments"),
            "{err:?}"
        );
        ctx.close().await;
    }
}