[−][src]Module imxrt1062_usbnc1::usb_otg1_ctrl
USB OTG1 Control Register
Structs
| OVER_CUR_DIS_W | Write proxy for field |
| OVER_CUR_POL_W | Write proxy for field |
| PWR_POL_W | Write proxy for field |
| WIE_W | Write proxy for field |
| WKUP_DPDM_EN_W | Write proxy for field |
| WKUP_ID_EN_W | Write proxy for field |
| WKUP_SW_EN_W | Write proxy for field |
| WKUP_SW_W | Write proxy for field |
| WKUP_VBUS_EN_W | Write proxy for field |
Enums
| OVER_CUR_DIS_A | Disable OTG1 Overcurrent Detection |
| OVER_CUR_POL_A | OTG1 Polarity of Overcurrent The polarity of OTG1 port overcurrent event |
| PWR_POL_A | OTG1 Power Polarity This bit should be set according to PMIC Power Pin polarity. |
| WIE_A | OTG1 Wake-up Interrupt Enable This bit enables or disables the OTG1 wake-up interrupt |
| WIR_A | OTG1 Wake-up Interrupt Request This bit indicates that a wake-up interrupt request is received on the OTG1 port |
| WKUP_DPDM_EN_A | Wake-up on DPDM change enable |
| WKUP_ID_EN_A | OTG1 Wake-up on ID change enable |
| WKUP_SW_A | OTG1 Software Wake-up |
| WKUP_SW_EN_A | OTG1 Software Wake-up Enable |
| WKUP_VBUS_EN_A | OTG1 wake-up on VBUS change enable |
Type Definitions
| OVER_CUR_DIS_R | Reader of field |
| OVER_CUR_POL_R | Reader of field |
| PWR_POL_R | Reader of field |
| R | Reader of register USB_OTG1_CTRL |
| W | Writer for register USB_OTG1_CTRL |
| WIE_R | Reader of field |
| WIR_R | Reader of field |
| WKUP_DPDM_EN_R | Reader of field |
| WKUP_ID_EN_R | Reader of field |
| WKUP_SW_EN_R | Reader of field |
| WKUP_SW_R | Reader of field |
| WKUP_VBUS_EN_R | Reader of field |