Crate hrs3300

This is a platform agnostic Rust driver for the HRS3300 heart rate sensor using the embedded-hal traits.

This driver allows you to:

• Enable/disable heart rate sensor. See: enable_hrs().
• Enable/disable oscillator. See: enable_oscillator().
• Initialize the device. See: init().
• Set the conversion delay. See: set_conversion_delay().
• Set the gain. See: set_gain().
• Set the ambient light sensor resolution. See: set_als_resolution().
• Set the LED current. See: set_led_current().
• Read the device id. See: device_id().
• Read the last heart rate sensor measurement. See: read_hrs().
• Read the last ambient light sensor measurement. See: read_als().
• Write/Read a register with a custom value. See: write_register().

The device

HRSS3300 is an optical digital heart rate sensor/monitor featuring a 525nm green LED and a reflection light detector for the PPG signal from the human body. The typical heart rate measurement samples the reflected PPG signal at 25Hz then the results can be read via the I2C bus.

Datasheet:

• HRS3300

Usage examples (see also examples folder)

To use this driver, import this crate and an embedded_hal implementation, then instantiate the appropriate device.

Initialize the device and take some measurements

extern crate linux_embedded_hal as hal;
extern crate hrs3300;
use hrs3300::Hrs3300;

let dev = hal::I2cdev::new("/dev/i2c-1").unwrap();
let mut sensor = Hrs3300::new(dev);
sensor.init().unwrap();
sensor.enable_hrs().unwrap();
sensor.enable_oscillator().unwrap();
loop {
    let hrs = sensor.read_hrs().unwrap();
    let als = sensor.read_als().unwrap();
    println!("HRS: {}, ALS: {}", hrs, als);
}

Change the parameters

extern crate linux_embedded_hal as hal;
extern crate hrs3300;
use hrs3300::{ConversionDelay, Gain, Hrs3300, LedCurrent};

let dev = hal::I2cdev::new("/dev/i2c-1").unwrap();
let mut sensor = Hrs3300::new(dev);
sensor.init().unwrap();
sensor.set_gain(Gain::Four).unwrap();
sensor.set_conversion_delay(ConversionDelay::Ms50).unwrap();
sensor.set_led_current(LedCurrent::Ma20).unwrap();

Structs

Hrs3300

HRS3300 device driver

Enums

AlsResolution	Ambient light sensor resolution
ConversionDelay	Wait time between each HRS conversion cycle
Error	All possible errors in this crate
Gain	HRS Gain
LedCurrent	LED drive current