Struct holochain::prelude::kitsune_p2p::dependencies::kitsune_p2p_types::dependencies::lair_keystore_api::dependencies::tokio::sync::Semaphore

pub struct Semaphore { /* private fields */ }

Counting semaphore performing asynchronous permit acquisition.

A semaphore maintains a set of permits. Permits are used to synchronize access to a shared resource. A semaphore differs from a mutex in that it can allow more than one concurrent caller to access the shared resource at a time.

When acquire is called and the semaphore has remaining permits, the function immediately returns a permit. However, if no remaining permits are available, acquire (asynchronously) waits until an outstanding permit is dropped. At this point, the freed permit is assigned to the caller.

This Semaphore is fair, which means that permits are given out in the order they were requested. This fairness is also applied when acquire_many gets involved, so if a call to acquire_many at the front of the queue requests more permits than currently available, this can prevent a call to acquire from completing, even if the semaphore has enough permits complete the call to acquire.

To use the Semaphore in a poll function, you can use the PollSemaphore utility.

Examples

Basic usage:

use tokio::sync::{Semaphore, TryAcquireError};

#[tokio::main]
async fn main() {
    let semaphore = Semaphore::new(3);

    let a_permit = semaphore.acquire().await.unwrap();
    let two_permits = semaphore.acquire_many(2).await.unwrap();

    assert_eq!(semaphore.available_permits(), 0);

    let permit_attempt = semaphore.try_acquire();
    assert_eq!(permit_attempt.err(), Some(TryAcquireError::NoPermits));
}

Use Semaphore::acquire_owned to move permits across tasks:

use std::sync::Arc;
use tokio::sync::Semaphore;

#[tokio::main]
async fn main() {
    let semaphore = Arc::new(Semaphore::new(3));
    let mut join_handles = Vec::new();

    for _ in 0..5 {
        let permit = semaphore.clone().acquire_owned().await.unwrap();
        join_handles.push(tokio::spawn(async move {
            // perform task...
            // explicitly own `permit` in the task
            drop(permit);
        }));
    }

    for handle in join_handles {
        handle.await.unwrap();
    }
}

Implementations

impl Semaphore

pub const MAX_PERMITS: usize = 2_305_843_009_213_693_951usize

The maximum number of permits which a semaphore can hold. It is usize::MAX >> 3.

Exceeding this limit typically results in a panic.

pub fn new(permits: usize) -> Semaphore

Creates a new semaphore with the initial number of permits.

Panics if permits exceeds Semaphore::MAX_PERMITS.

pub const fn const_new(permits: usize) -> Semaphore

Creates a new semaphore with the initial number of permits.

Examples

use tokio::sync::Semaphore;

static SEM: Semaphore = Semaphore::const_new(10);

pub fn available_permits(&self) -> usize

Returns the current number of available permits.

pub fn add_permits(&self, n: usize)

Adds n new permits to the semaphore.

The maximum number of permits is Semaphore::MAX_PERMITS, and this function will panic if the limit is exceeded.

pub async fn acquire( &self ) -> impl Future<Output = Result<SemaphorePermit<'_>, AcquireError>>

Acquires a permit from the semaphore.

If the semaphore has been closed, this returns an AcquireError. Otherwise, this returns a SemaphorePermit representing the acquired permit.

Cancel safety

This method uses a queue to fairly distribute permits in the order they were requested. Cancelling a call to acquire makes you lose your place in the queue.

Examples

use tokio::sync::Semaphore;

#[tokio::main]
async fn main() {
    let semaphore = Semaphore::new(2);

    let permit_1 = semaphore.acquire().await.unwrap();
    assert_eq!(semaphore.available_permits(), 1);

    let permit_2 = semaphore.acquire().await.unwrap();
    assert_eq!(semaphore.available_permits(), 0);

    drop(permit_1);
    assert_eq!(semaphore.available_permits(), 1);
}

pub async fn acquire_many( &self, n: u32 ) -> impl Future<Output = Result<SemaphorePermit<'_>, AcquireError>>

Acquires n permits from the semaphore.

If the semaphore has been closed, this returns an AcquireError. Otherwise, this returns a SemaphorePermit representing the acquired permits.

Cancel safety

This method uses a queue to fairly distribute permits in the order they were requested. Cancelling a call to acquire_many makes you lose your place in the queue.

Examples

use tokio::sync::Semaphore;

#[tokio::main]
async fn main() {
    let semaphore = Semaphore::new(5);

    let permit = semaphore.acquire_many(3).await.unwrap();
    assert_eq!(semaphore.available_permits(), 2);
}

pub fn try_acquire(&self) -> Result<SemaphorePermit<'_>, TryAcquireError>

Tries to acquire a permit from the semaphore.

If the semaphore has been closed, this returns a TryAcquireError::Closed and a TryAcquireError::NoPermits if there are no permits left. Otherwise, this returns a SemaphorePermit representing the acquired permits.

Examples

use tokio::sync::{Semaphore, TryAcquireError};

let semaphore = Semaphore::new(2);

let permit_1 = semaphore.try_acquire().unwrap();
assert_eq!(semaphore.available_permits(), 1);

let permit_2 = semaphore.try_acquire().unwrap();
assert_eq!(semaphore.available_permits(), 0);

let permit_3 = semaphore.try_acquire();
assert_eq!(permit_3.err(), Some(TryAcquireError::NoPermits));

pub fn try_acquire_many( &self, n: u32 ) -> Result<SemaphorePermit<'_>, TryAcquireError>

Tries to acquire n permits from the semaphore.

If the semaphore has been closed, this returns a TryAcquireError::Closed and a TryAcquireError::NoPermits if there are not enough permits left. Otherwise, this returns a SemaphorePermit representing the acquired permits.

Examples

use tokio::sync::{Semaphore, TryAcquireError};

let semaphore = Semaphore::new(4);

let permit_1 = semaphore.try_acquire_many(3).unwrap();
assert_eq!(semaphore.available_permits(), 1);

let permit_2 = semaphore.try_acquire_many(2);
assert_eq!(permit_2.err(), Some(TryAcquireError::NoPermits));

pub async fn acquire_owned( self: Arc<Semaphore, Global> ) -> impl Future<Output = Result<OwnedSemaphorePermit, AcquireError>>

Acquires a permit from the semaphore.

The semaphore must be wrapped in an Arc to call this method. If the semaphore has been closed, this returns an AcquireError. Otherwise, this returns a OwnedSemaphorePermit representing the acquired permit.

Cancel safety

This method uses a queue to fairly distribute permits in the order they were requested. Cancelling a call to acquire_owned makes you lose your place in the queue.

Examples

use std::sync::Arc;
use tokio::sync::Semaphore;

#[tokio::main]
async fn main() {
    let semaphore = Arc::new(Semaphore::new(3));
    let mut join_handles = Vec::new();

    for _ in 0..5 {
        let permit = semaphore.clone().acquire_owned().await.unwrap();
        join_handles.push(tokio::spawn(async move {
            // perform task...
            // explicitly own `permit` in the task
            drop(permit);
        }));
    }

    for handle in join_handles {
        handle.await.unwrap();
    }
}

pub async fn acquire_many_owned( self: Arc<Semaphore, Global>, n: u32 ) -> impl Future<Output = Result<OwnedSemaphorePermit, AcquireError>>

Acquires n permits from the semaphore.

The semaphore must be wrapped in an Arc to call this method. If the semaphore has been closed, this returns an AcquireError. Otherwise, this returns a OwnedSemaphorePermit representing the acquired permit.

Cancel safety

This method uses a queue to fairly distribute permits in the order they were requested. Cancelling a call to acquire_many_owned makes you lose your place in the queue.

Examples

use std::sync::Arc;
use tokio::sync::Semaphore;

#[tokio::main]
async fn main() {
    let semaphore = Arc::new(Semaphore::new(10));
    let mut join_handles = Vec::new();

    for _ in 0..5 {
        let permit = semaphore.clone().acquire_many_owned(2).await.unwrap();
        join_handles.push(tokio::spawn(async move {
            // perform task...
            // explicitly own `permit` in the task
            drop(permit);
        }));
    }

    for handle in join_handles {
        handle.await.unwrap();
    }
}

pub fn try_acquire_owned( self: Arc<Semaphore, Global> ) -> Result<OwnedSemaphorePermit, TryAcquireError>

Tries to acquire a permit from the semaphore.

The semaphore must be wrapped in an Arc to call this method. If the semaphore has been closed, this returns a TryAcquireError::Closed and a TryAcquireError::NoPermits if there are no permits left. Otherwise, this returns a OwnedSemaphorePermit representing the acquired permit.

Examples

use std::sync::Arc;
use tokio::sync::{Semaphore, TryAcquireError};

let semaphore = Arc::new(Semaphore::new(2));

let permit_1 = Arc::clone(&semaphore).try_acquire_owned().unwrap();
assert_eq!(semaphore.available_permits(), 1);

let permit_2 = Arc::clone(&semaphore).try_acquire_owned().unwrap();
assert_eq!(semaphore.available_permits(), 0);

let permit_3 = semaphore.try_acquire_owned();
assert_eq!(permit_3.err(), Some(TryAcquireError::NoPermits));

pub fn try_acquire_many_owned( self: Arc<Semaphore, Global>, n: u32 ) -> Result<OwnedSemaphorePermit, TryAcquireError>

Tries to acquire n permits from the semaphore.

The semaphore must be wrapped in an Arc to call this method. If the semaphore has been closed, this returns a TryAcquireError::Closed and a TryAcquireError::NoPermits if there are no permits left. Otherwise, this returns a OwnedSemaphorePermit representing the acquired permit.

Examples

use std::sync::Arc;
use tokio::sync::{Semaphore, TryAcquireError};

let semaphore = Arc::new(Semaphore::new(4));

let permit_1 = Arc::clone(&semaphore).try_acquire_many_owned(3).unwrap();
assert_eq!(semaphore.available_permits(), 1);

let permit_2 = semaphore.try_acquire_many_owned(2);
assert_eq!(permit_2.err(), Some(TryAcquireError::NoPermits));

pub fn close(&self)

Closes the semaphore.

This prevents the semaphore from issuing new permits and notifies all pending waiters.

Examples

use tokio::sync::Semaphore;
use std::sync::Arc;
use tokio::sync::TryAcquireError;

#[tokio::main]
async fn main() {
    let semaphore = Arc::new(Semaphore::new(1));
    let semaphore2 = semaphore.clone();

    tokio::spawn(async move {
        let permit = semaphore.acquire_many(2).await;
        assert!(permit.is_err());
        println!("waiter received error");
    });

    println!("closing semaphore");
    semaphore2.close();

    // Cannot obtain more permits
    assert_eq!(semaphore2.try_acquire().err(), Some(TryAcquireError::Closed))
}

pub fn is_closed(&self) -> bool

Returns true if the semaphore is closed

Trait Implementations

impl Debug for Semaphore

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.