pub struct UnboundedSender<T>(/* private fields */);
Expand description

The transmission end of an unbounded mpsc channel.

This value is created by the unbounded function.

Implementations§

§

impl<T> UnboundedSender<T>

pub fn poll_ready(&self, _: &mut Context<'_>) -> Poll<Result<(), SendError>>

Check if the channel is ready to receive a message.

pub fn is_closed(&self) -> bool

Returns whether this channel is closed without needing a context.

pub fn close_channel(&self)

Closes this channel from the sender side, preventing any new messages.

pub fn disconnect(&mut self)

Disconnects this sender from the channel, closing it if there are no more senders left.

pub fn start_send(&mut self, msg: T) -> Result<(), SendError>

Send a message on the channel.

This method should only be called after poll_ready has been used to verify that the channel is ready to receive a message.

pub fn unbounded_send(&self, msg: T) -> Result<(), TrySendError<T>>

Sends a message along this channel.

This is an unbounded sender, so this function differs from Sink::send by ensuring the return type reflects that the channel is always ready to receive messages.

pub fn same_receiver(&self, other: &UnboundedSender<T>) -> bool

Returns whether the senders send to the same receiver.

pub fn is_connected_to(&self, receiver: &UnboundedReceiver<T>) -> bool

Returns whether the sender send to this receiver.

pub fn hash_receiver<H>(&self, hasher: &mut H)
where H: Hasher,

Hashes the receiver into the provided hasher

pub fn len(&self) -> usize

Return the number of messages in the queue or 0 if channel is disconnected.

pub fn is_empty(&self) -> bool

Return false is channel has no queued messages, true otherwise.

Trait Implementations§

§

impl<T> Clone for UnboundedSender<T>

§

fn clone(&self) -> UnboundedSender<T>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl<T> Debug for UnboundedSender<T>

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl<T> Sink<T> for &UnboundedSender<T>

§

type Error = SendError

The type of value produced by the sink when an error occurs.
§

fn poll_ready( self: Pin<&mut &UnboundedSender<T>>, cx: &mut Context<'_> ) -> Poll<Result<(), <&UnboundedSender<T> as Sink<T>>::Error>>

Attempts to prepare the Sink to receive a value. Read more
§

fn start_send( self: Pin<&mut &UnboundedSender<T>>, msg: T ) -> Result<(), <&UnboundedSender<T> as Sink<T>>::Error>

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more
§

fn poll_flush( self: Pin<&mut &UnboundedSender<T>>, _: &mut Context<'_> ) -> Poll<Result<(), <&UnboundedSender<T> as Sink<T>>::Error>>

Flush any remaining output from this sink. Read more
§

fn poll_close( self: Pin<&mut &UnboundedSender<T>>, _: &mut Context<'_> ) -> Poll<Result<(), <&UnboundedSender<T> as Sink<T>>::Error>>

Flush any remaining output and close this sink, if necessary. Read more
§

impl<T> Sink<T> for UnboundedSender<T>

§

type Error = SendError

The type of value produced by the sink when an error occurs.
§

fn poll_ready( self: Pin<&mut UnboundedSender<T>>, cx: &mut Context<'_> ) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>

Attempts to prepare the Sink to receive a value. Read more
§

fn start_send( self: Pin<&mut UnboundedSender<T>>, msg: T ) -> Result<(), <UnboundedSender<T> as Sink<T>>::Error>

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more
§

fn poll_flush( self: Pin<&mut UnboundedSender<T>>, _: &mut Context<'_> ) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>

Flush any remaining output from this sink. Read more
§

fn poll_close( self: Pin<&mut UnboundedSender<T>>, _: &mut Context<'_> ) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>

Flush any remaining output and close this sink, if necessary. Read more

Auto Trait Implementations§

§

impl<T> !RefUnwindSafe for UnboundedSender<T>

§

impl<T> Send for UnboundedSender<T>
where T: Send,

§

impl<T> Sync for UnboundedSender<T>
where T: Send,

§

impl<T> Unpin for UnboundedSender<T>

§

impl<T> !UnwindSafe for UnboundedSender<T>

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> Any for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

§

fn type_name(&self) -> &'static str

§

impl<T> AnySync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

§

impl<T> ArchivePointee for T

§

type ArchivedMetadata = ()

The archived version of the pointer metadata for this type.
§

fn pointer_metadata( _: &<T as ArchivePointee>::ArchivedMetadata ) -> <T as Pointee>::Metadata

Converts some archived metadata to the pointer metadata for itself.
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<F, W, T, D> Deserialize<With<T, W>, D> for F
where W: DeserializeWith<F, T, D>, D: Fallible + ?Sized, F: ?Sized,

§

fn deserialize( &self, deserializer: &mut D ) -> Result<With<T, W>, <D as Fallible>::Error>

Deserializes using the given deserializer
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FutureExt for T

source§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
source§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> LayoutRaw for T

§

fn layout_raw(_: <T as Pointee>::Metadata) -> Result<Layout, LayoutError>

Gets the layout of the type.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> Pointee for T

§

type Metadata = ()

The type for metadata in pointers and references to Self.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
§

impl<T, Item> SinkExt<Item> for T
where T: Sink<Item> + ?Sized,

§

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F>
where F: FnMut(U) -> Fut, Fut: Future<Output = Result<Item, E>>, E: From<Self::Error>, Self: Sized,

Composes a function in front of the sink. Read more
§

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F>
where F: FnMut(U) -> St, St: Stream<Item = Result<Item, Self::Error>>, Self: Sized,

Composes a function in front of the sink. Read more
§

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F>
where F: FnOnce(Self::Error) -> E, Self: Sized,

Transforms the error returned by the sink.
§

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E>
where Self: Sized, Self::Error: Into<E>,

Map this sink’s error to a different error type using the Into trait. Read more
§

fn buffer(self, capacity: usize) -> Buffer<Self, Item>
where Self: Sized,

Adds a fixed-size buffer to the current sink. Read more
§

fn close(&mut self) -> Close<'_, Self, Item>
where Self: Unpin,

Close the sink.
§

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si>
where Self: Sized, Item: Clone, Si: Sink<Item, Error = Self::Error>,

Fanout items to multiple sinks. Read more
§

fn flush(&mut self) -> Flush<'_, Self, Item>
where Self: Unpin,

Flush the sink, processing all pending items. Read more
§

fn send(&mut self, item: Item) -> Send<'_, Self, Item>
where Self: Unpin,

A future that completes after the given item has been fully processed into the sink, including flushing. Read more
§

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item>
where Self: Unpin,

A future that completes after the given item has been received by the sink. Read more
§

fn send_all<St, 'a>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St>
where St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized, Self: Unpin,

A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
§

fn left_sink<Si2>(self) -> Either<Self, Si2>
where Si2: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this sink in an Either sink, making it the left-hand variant of that Either. Read more
§

fn right_sink<Si1>(self) -> Either<Si1, Self>
where Si1: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
§

fn poll_ready_unpin( &mut self, cx: &mut Context<'_> ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_ready on Unpin sink types.
§

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error>
where Self: Unpin,

A convenience method for calling Sink::start_send on Unpin sink types.
§

fn poll_flush_unpin( &mut self, cx: &mut Context<'_> ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_flush on Unpin sink types.
§

fn poll_close_unpin( &mut self, cx: &mut Context<'_> ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_close on Unpin sink types.
§

impl<Item, S> SinkRateLimitExt<Item, S> for S
where S: Sink<Item>,

§

fn ratelimit_sink<D, C>( self, limiter: &RateLimiter<NotKeyed, D, C> ) -> RatelimitedSink<'_, Item, S, D, C>
where D: DirectStateStore, C: ReasonablyRealtime,

Limits the rate at which items can be put into the current sink.
§

fn ratelimit_sink_with_jitter<D, C>( self, limiter: &RateLimiter<NotKeyed, D, C>, jitter: Jitter ) -> RatelimitedSink<'_, Item, S, D, C>
where D: DirectStateStore, C: ReasonablyRealtime,

Limits the rate at which items can be put into the current sink, with a randomized wait period.
§

impl<SS, SP> SupersetOf<SS> for SP
where SS: SubsetOf<SP>,

§

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more
§

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).
§

fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.
§

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> Upcastable for T
where T: Any + Send + Sync + 'static,

§

fn upcast_any_ref(&self) -> &(dyn Any + 'static)

upcast ref
§

fn upcast_any_mut(&mut self) -> &mut (dyn Any + 'static)

upcast mut ref
§

fn upcast_any_box(self: Box<T>) -> Box<dyn Any>

upcast boxed dyn
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> State for T
where T: Debug + Clone + Send + Sync,