Module gd32f1x0_hal::pac::i2c0::stat0 [−][src]
Expand description
Transfer status register 0
Structs
| ADD10SEND_R | Field |
| ADDSEND_R | Field |
| AERR_R | Field |
| AERR_W | Field |
| BERR_R | Field |
| BERR_W | Field |
| BTC_R | Field |
| LOSTARB_R | Field |
| LOSTARB_W | Field |
| OUERR_R | Field |
| OUERR_W | Field |
| PECERR_R | Field |
| PECERR_W | Field |
| R | Register |
| RBNE_R | Field |
| SBSEND_R | Field |
| SMBALTS_R | Field |
| SMBALTS_W | Field |
| SMBTO_R | Field |
| SMBTO_W | Field |
| STAT0_SPEC | Transfer status register 0 |
| STPDET_R | Field |
| TBE_R | Field |
| W | Register |
Enums
| ADD10SEND_A | Header of 10-bit address is sent in master mode |
| ADDSEND_A | Address is sent in master mode or received and matches in slave mode |
| AERR_A | Acknowledge error |
| BERR_A | Bus error |
| BTC_A | Byte transmission completed |
| LOSTARB_A | Arbitration Lost in master mode |
| OUERR_A | Over-run or under-run situation occurs in slave mode |
| PECERR_A | PEC error when receiving data |
| RBNE_A | TRBR is not Empty during receiving |
| SBSEND_A | START condition sent out in master mode |
| SMBALTS_A | SMBus Alert status |
| SMBTO_A | Timeout signal in SMBus mode |
| STPDET_A | STOP condition detected in slave mode |
| TBE_A | I2C_DATA is Empty during transmitting |