#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
ep1: EP1,
ep1_conf: EP1_CONF,
int_raw: INT_RAW,
int_st: INT_ST,
int_ena: INT_ENA,
int_clr: INT_CLR,
conf0: CONF0,
test: TEST,
jfifo_st: JFIFO_ST,
fram_num: FRAM_NUM,
in_ep0_st: IN_EP0_ST,
in_ep1_st: IN_EP1_ST,
in_ep2_st: IN_EP2_ST,
in_ep3_st: IN_EP3_ST,
out_ep0_st: OUT_EP0_ST,
out_ep1_st: OUT_EP1_ST,
out_ep2_st: OUT_EP2_ST,
misc_conf: MISC_CONF,
mem_conf: MEM_CONF,
_reserved19: [u8; 0x34],
date: DATE,
}
impl RegisterBlock {
#[doc = "0x00 - USB_DEVICE_EP1_REG."]
#[inline(always)]
pub const fn ep1(&self) -> &EP1 {
&self.ep1
}
#[doc = "0x04 - USB_DEVICE_EP1_CONF_REG."]
#[inline(always)]
pub const fn ep1_conf(&self) -> &EP1_CONF {
&self.ep1_conf
}
#[doc = "0x08 - USB_DEVICE_INT_RAW_REG."]
#[inline(always)]
pub const fn int_raw(&self) -> &INT_RAW {
&self.int_raw
}
#[doc = "0x0c - USB_DEVICE_INT_ST_REG."]
#[inline(always)]
pub const fn int_st(&self) -> &INT_ST {
&self.int_st
}
#[doc = "0x10 - USB_DEVICE_INT_ENA_REG."]
#[inline(always)]
pub const fn int_ena(&self) -> &INT_ENA {
&self.int_ena
}
#[doc = "0x14 - USB_DEVICE_INT_CLR_REG."]
#[inline(always)]
pub const fn int_clr(&self) -> &INT_CLR {
&self.int_clr
}
#[doc = "0x18 - USB_DEVICE_CONF0_REG."]
#[inline(always)]
pub const fn conf0(&self) -> &CONF0 {
&self.conf0
}
#[doc = "0x1c - USB_DEVICE_TEST_REG."]
#[inline(always)]
pub const fn test(&self) -> &TEST {
&self.test
}
#[doc = "0x20 - USB_DEVICE_JFIFO_ST_REG."]
#[inline(always)]
pub const fn jfifo_st(&self) -> &JFIFO_ST {
&self.jfifo_st
}
#[doc = "0x24 - USB_DEVICE_FRAM_NUM_REG."]
#[inline(always)]
pub const fn fram_num(&self) -> &FRAM_NUM {
&self.fram_num
}
#[doc = "0x28 - USB_DEVICE_IN_EP0_ST_REG."]
#[inline(always)]
pub const fn in_ep0_st(&self) -> &IN_EP0_ST {
&self.in_ep0_st
}
#[doc = "0x2c - USB_DEVICE_IN_EP1_ST_REG."]
#[inline(always)]
pub const fn in_ep1_st(&self) -> &IN_EP1_ST {
&self.in_ep1_st
}
#[doc = "0x30 - USB_DEVICE_IN_EP2_ST_REG."]
#[inline(always)]
pub const fn in_ep2_st(&self) -> &IN_EP2_ST {
&self.in_ep2_st
}
#[doc = "0x34 - USB_DEVICE_IN_EP3_ST_REG."]
#[inline(always)]
pub const fn in_ep3_st(&self) -> &IN_EP3_ST {
&self.in_ep3_st
}
#[doc = "0x38 - USB_DEVICE_OUT_EP0_ST_REG."]
#[inline(always)]
pub const fn out_ep0_st(&self) -> &OUT_EP0_ST {
&self.out_ep0_st
}
#[doc = "0x3c - USB_DEVICE_OUT_EP1_ST_REG."]
#[inline(always)]
pub const fn out_ep1_st(&self) -> &OUT_EP1_ST {
&self.out_ep1_st
}
#[doc = "0x40 - USB_DEVICE_OUT_EP2_ST_REG."]
#[inline(always)]
pub const fn out_ep2_st(&self) -> &OUT_EP2_ST {
&self.out_ep2_st
}
#[doc = "0x44 - USB_DEVICE_MISC_CONF_REG."]
#[inline(always)]
pub const fn misc_conf(&self) -> &MISC_CONF {
&self.misc_conf
}
#[doc = "0x48 - USB_DEVICE_MEM_CONF_REG."]
#[inline(always)]
pub const fn mem_conf(&self) -> &MEM_CONF {
&self.mem_conf
}
#[doc = "0x80 - USB_DEVICE_DATE_REG."]
#[inline(always)]
pub const fn date(&self) -> &DATE {
&self.date
}
}
#[doc = "EP1 (rw) register accessor: USB_DEVICE_EP1_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ep1::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ep1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ep1`] module"]
pub type EP1 = crate::Reg<ep1::EP1_SPEC>;
#[doc = "USB_DEVICE_EP1_REG."]
pub mod ep1;
#[doc = "EP1_CONF (rw) register accessor: USB_DEVICE_EP1_CONF_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ep1_conf::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ep1_conf::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ep1_conf`] module"]
pub type EP1_CONF = crate::Reg<ep1_conf::EP1_CONF_SPEC>;
#[doc = "USB_DEVICE_EP1_CONF_REG."]
pub mod ep1_conf;
#[doc = "INT_RAW (rw) register accessor: USB_DEVICE_INT_RAW_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_raw::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_raw::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "USB_DEVICE_INT_RAW_REG."]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: USB_DEVICE_INT_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = "USB_DEVICE_INT_ST_REG."]
pub mod int_st;
#[doc = "INT_ENA (rw) register accessor: USB_DEVICE_INT_ENA_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "USB_DEVICE_INT_ENA_REG."]
pub mod int_ena;
#[doc = "INT_CLR (w) register accessor: USB_DEVICE_INT_CLR_REG.\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "USB_DEVICE_INT_CLR_REG."]
pub mod int_clr;
#[doc = "CONF0 (rw) register accessor: USB_DEVICE_CONF0_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`conf0::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`conf0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf0`] module"]
pub type CONF0 = crate::Reg<conf0::CONF0_SPEC>;
#[doc = "USB_DEVICE_CONF0_REG."]
pub mod conf0;
#[doc = "TEST (rw) register accessor: USB_DEVICE_TEST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`test::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`test::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@test`] module"]
pub type TEST = crate::Reg<test::TEST_SPEC>;
#[doc = "USB_DEVICE_TEST_REG."]
pub mod test;
#[doc = "JFIFO_ST (rw) register accessor: USB_DEVICE_JFIFO_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`jfifo_st::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`jfifo_st::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@jfifo_st`] module"]
pub type JFIFO_ST = crate::Reg<jfifo_st::JFIFO_ST_SPEC>;
#[doc = "USB_DEVICE_JFIFO_ST_REG."]
pub mod jfifo_st;
#[doc = "FRAM_NUM (r) register accessor: USB_DEVICE_FRAM_NUM_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`fram_num::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fram_num`] module"]
pub type FRAM_NUM = crate::Reg<fram_num::FRAM_NUM_SPEC>;
#[doc = "USB_DEVICE_FRAM_NUM_REG."]
pub mod fram_num;
#[doc = "IN_EP0_ST (r) register accessor: USB_DEVICE_IN_EP0_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`in_ep0_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_ep0_st`] module"]
pub type IN_EP0_ST = crate::Reg<in_ep0_st::IN_EP0_ST_SPEC>;
#[doc = "USB_DEVICE_IN_EP0_ST_REG."]
pub mod in_ep0_st;
#[doc = "IN_EP1_ST (r) register accessor: USB_DEVICE_IN_EP1_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`in_ep1_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_ep1_st`] module"]
pub type IN_EP1_ST = crate::Reg<in_ep1_st::IN_EP1_ST_SPEC>;
#[doc = "USB_DEVICE_IN_EP1_ST_REG."]
pub mod in_ep1_st;
#[doc = "IN_EP2_ST (r) register accessor: USB_DEVICE_IN_EP2_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`in_ep2_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_ep2_st`] module"]
pub type IN_EP2_ST = crate::Reg<in_ep2_st::IN_EP2_ST_SPEC>;
#[doc = "USB_DEVICE_IN_EP2_ST_REG."]
pub mod in_ep2_st;
#[doc = "IN_EP3_ST (r) register accessor: USB_DEVICE_IN_EP3_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`in_ep3_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_ep3_st`] module"]
pub type IN_EP3_ST = crate::Reg<in_ep3_st::IN_EP3_ST_SPEC>;
#[doc = "USB_DEVICE_IN_EP3_ST_REG."]
pub mod in_ep3_st;
#[doc = "OUT_EP0_ST (r) register accessor: USB_DEVICE_OUT_EP0_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`out_ep0_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_ep0_st`] module"]
pub type OUT_EP0_ST = crate::Reg<out_ep0_st::OUT_EP0_ST_SPEC>;
#[doc = "USB_DEVICE_OUT_EP0_ST_REG."]
pub mod out_ep0_st;
#[doc = "OUT_EP1_ST (r) register accessor: USB_DEVICE_OUT_EP1_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`out_ep1_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_ep1_st`] module"]
pub type OUT_EP1_ST = crate::Reg<out_ep1_st::OUT_EP1_ST_SPEC>;
#[doc = "USB_DEVICE_OUT_EP1_ST_REG."]
pub mod out_ep1_st;
#[doc = "OUT_EP2_ST (r) register accessor: USB_DEVICE_OUT_EP2_ST_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`out_ep2_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_ep2_st`] module"]
pub type OUT_EP2_ST = crate::Reg<out_ep2_st::OUT_EP2_ST_SPEC>;
#[doc = "USB_DEVICE_OUT_EP2_ST_REG."]
pub mod out_ep2_st;
#[doc = "MISC_CONF (rw) register accessor: USB_DEVICE_MISC_CONF_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`misc_conf::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`misc_conf::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@misc_conf`] module"]
pub type MISC_CONF = crate::Reg<misc_conf::MISC_CONF_SPEC>;
#[doc = "USB_DEVICE_MISC_CONF_REG."]
pub mod misc_conf;
#[doc = "MEM_CONF (rw) register accessor: USB_DEVICE_MEM_CONF_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`mem_conf::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`mem_conf::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mem_conf`] module"]
pub type MEM_CONF = crate::Reg<mem_conf::MEM_CONF_SPEC>;
#[doc = "USB_DEVICE_MEM_CONF_REG."]
pub mod mem_conf;
#[doc = "DATE (rw) register accessor: USB_DEVICE_DATE_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`date::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`date::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@date`] module"]
pub type DATE = crate::Reg<date::DATE_SPEC>;
#[doc = "USB_DEVICE_DATE_REG."]
pub mod date;