#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
t: [T; 1],
_reserved1: [u8; 0x24],
wdtconfig0: WDTCONFIG0,
wdtconfig1: WDTCONFIG1,
wdtconfig2: WDTCONFIG2,
wdtconfig3: WDTCONFIG3,
wdtconfig4: WDTCONFIG4,
wdtconfig5: WDTCONFIG5,
wdtfeed: WDTFEED,
wdtwprotect: WDTWPROTECT,
rtccalicfg: RTCCALICFG,
rtccalicfg1: RTCCALICFG1,
int_ena_timers: INT_ENA_TIMERS,
int_raw_timers: INT_RAW_TIMERS,
int_st_timers: INT_ST_TIMERS,
int_clr_timers: INT_CLR_TIMERS,
rtccalicfg2: RTCCALICFG2,
_reserved16: [u8; 0x74],
ntimg_date: NTIMG_DATE,
regclk: REGCLK,
}
impl RegisterBlock {
#[doc = "0x00..0x24 - Cluster T%s, containing T?CONFIG, T?LO, T?HI, T?UPDATE, T?ALARMLO, T?ALARMHI, T?LOADLO, T?LOADHI, T?LOAD"]
#[inline(always)]
pub const fn t(&self, n: usize) -> &T {
&self.t[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x00..0x24 - Cluster T%s, containing T?CONFIG, T?LO, T?HI, T?UPDATE, T?ALARMLO, T?ALARMHI, T?LOADLO, T?LOADHI, T?LOAD"]
#[inline(always)]
pub fn t_iter(&self) -> impl Iterator<Item = &T> {
self.t.iter()
}
#[doc = "0x48 - TIMG_WDTCONFIG0_REG."]
#[inline(always)]
pub const fn wdtconfig0(&self) -> &WDTCONFIG0 {
&self.wdtconfig0
}
#[doc = "0x4c - TIMG_WDTCONFIG1_REG."]
#[inline(always)]
pub const fn wdtconfig1(&self) -> &WDTCONFIG1 {
&self.wdtconfig1
}
#[doc = "0x50 - TIMG_WDTCONFIG2_REG."]
#[inline(always)]
pub const fn wdtconfig2(&self) -> &WDTCONFIG2 {
&self.wdtconfig2
}
#[doc = "0x54 - TIMG_WDTCONFIG3_REG."]
#[inline(always)]
pub const fn wdtconfig3(&self) -> &WDTCONFIG3 {
&self.wdtconfig3
}
#[doc = "0x58 - TIMG_WDTCONFIG4_REG."]
#[inline(always)]
pub const fn wdtconfig4(&self) -> &WDTCONFIG4 {
&self.wdtconfig4
}
#[doc = "0x5c - TIMG_WDTCONFIG5_REG."]
#[inline(always)]
pub const fn wdtconfig5(&self) -> &WDTCONFIG5 {
&self.wdtconfig5
}
#[doc = "0x60 - TIMG_WDTFEED_REG."]
#[inline(always)]
pub const fn wdtfeed(&self) -> &WDTFEED {
&self.wdtfeed
}
#[doc = "0x64 - TIMG_WDTWPROTECT_REG."]
#[inline(always)]
pub const fn wdtwprotect(&self) -> &WDTWPROTECT {
&self.wdtwprotect
}
#[doc = "0x68 - TIMG_RTCCALICFG_REG."]
#[inline(always)]
pub const fn rtccalicfg(&self) -> &RTCCALICFG {
&self.rtccalicfg
}
#[doc = "0x6c - TIMG_RTCCALICFG1_REG."]
#[inline(always)]
pub const fn rtccalicfg1(&self) -> &RTCCALICFG1 {
&self.rtccalicfg1
}
#[doc = "0x70 - INT_ENA_TIMG_REG"]
#[inline(always)]
pub const fn int_ena_timers(&self) -> &INT_ENA_TIMERS {
&self.int_ena_timers
}
#[doc = "0x74 - INT_RAW_TIMG_REG"]
#[inline(always)]
pub const fn int_raw_timers(&self) -> &INT_RAW_TIMERS {
&self.int_raw_timers
}
#[doc = "0x78 - INT_ST_TIMG_REG"]
#[inline(always)]
pub const fn int_st_timers(&self) -> &INT_ST_TIMERS {
&self.int_st_timers
}
#[doc = "0x7c - INT_CLR_TIMG_REG"]
#[inline(always)]
pub const fn int_clr_timers(&self) -> &INT_CLR_TIMERS {
&self.int_clr_timers
}
#[doc = "0x80 - TIMG_RTCCALICFG2_REG."]
#[inline(always)]
pub const fn rtccalicfg2(&self) -> &RTCCALICFG2 {
&self.rtccalicfg2
}
#[doc = "0xf8 - TIMG_NTIMG_DATE_REG."]
#[inline(always)]
pub const fn ntimg_date(&self) -> &NTIMG_DATE {
&self.ntimg_date
}
#[doc = "0xfc - TIMG_REGCLK_REG."]
#[inline(always)]
pub const fn regclk(&self) -> ®CLK {
&self.regclk
}
}
#[doc = "Cluster T%s, containing T?CONFIG, T?LO, T?HI, T?UPDATE, T?ALARMLO, T?ALARMHI, T?LOADLO, T?LOADHI, T?LOAD"]
pub use self::t::T;
#[doc = r"Cluster"]
#[doc = "Cluster T%s, containing T?CONFIG, T?LO, T?HI, T?UPDATE, T?ALARMLO, T?ALARMHI, T?LOADLO, T?LOADHI, T?LOAD"]
pub mod t;
#[doc = "WDTCONFIG0 (rw) register accessor: TIMG_WDTCONFIG0_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wdtconfig0::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wdtconfig0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig0`] module"]
pub type WDTCONFIG0 = crate::Reg<wdtconfig0::WDTCONFIG0_SPEC>;
#[doc = "TIMG_WDTCONFIG0_REG."]
pub mod wdtconfig0;
#[doc = "WDTCONFIG1 (rw) register accessor: TIMG_WDTCONFIG1_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wdtconfig1::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wdtconfig1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig1`] module"]
pub type WDTCONFIG1 = crate::Reg<wdtconfig1::WDTCONFIG1_SPEC>;
#[doc = "TIMG_WDTCONFIG1_REG."]
pub mod wdtconfig1;
#[doc = "WDTCONFIG2 (rw) register accessor: TIMG_WDTCONFIG2_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wdtconfig2::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wdtconfig2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig2`] module"]
pub type WDTCONFIG2 = crate::Reg<wdtconfig2::WDTCONFIG2_SPEC>;
#[doc = "TIMG_WDTCONFIG2_REG."]
pub mod wdtconfig2;
#[doc = "WDTCONFIG3 (rw) register accessor: TIMG_WDTCONFIG3_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wdtconfig3::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wdtconfig3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig3`] module"]
pub type WDTCONFIG3 = crate::Reg<wdtconfig3::WDTCONFIG3_SPEC>;
#[doc = "TIMG_WDTCONFIG3_REG."]
pub mod wdtconfig3;
#[doc = "WDTCONFIG4 (rw) register accessor: TIMG_WDTCONFIG4_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wdtconfig4::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wdtconfig4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig4`] module"]
pub type WDTCONFIG4 = crate::Reg<wdtconfig4::WDTCONFIG4_SPEC>;
#[doc = "TIMG_WDTCONFIG4_REG."]
pub mod wdtconfig4;
#[doc = "WDTCONFIG5 (rw) register accessor: TIMG_WDTCONFIG5_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wdtconfig5::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wdtconfig5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig5`] module"]
pub type WDTCONFIG5 = crate::Reg<wdtconfig5::WDTCONFIG5_SPEC>;
#[doc = "TIMG_WDTCONFIG5_REG."]
pub mod wdtconfig5;
#[doc = "WDTFEED (w) register accessor: TIMG_WDTFEED_REG.\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wdtfeed::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtfeed`] module"]
pub type WDTFEED = crate::Reg<wdtfeed::WDTFEED_SPEC>;
#[doc = "TIMG_WDTFEED_REG."]
pub mod wdtfeed;
#[doc = "WDTWPROTECT (rw) register accessor: TIMG_WDTWPROTECT_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wdtwprotect::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wdtwprotect::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtwprotect`] module"]
pub type WDTWPROTECT = crate::Reg<wdtwprotect::WDTWPROTECT_SPEC>;
#[doc = "TIMG_WDTWPROTECT_REG."]
pub mod wdtwprotect;
#[doc = "RTCCALICFG (rw) register accessor: TIMG_RTCCALICFG_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rtccalicfg::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`rtccalicfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtccalicfg`] module"]
pub type RTCCALICFG = crate::Reg<rtccalicfg::RTCCALICFG_SPEC>;
#[doc = "TIMG_RTCCALICFG_REG."]
pub mod rtccalicfg;
#[doc = "RTCCALICFG1 (r) register accessor: TIMG_RTCCALICFG1_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rtccalicfg1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtccalicfg1`] module"]
pub type RTCCALICFG1 = crate::Reg<rtccalicfg1::RTCCALICFG1_SPEC>;
#[doc = "TIMG_RTCCALICFG1_REG."]
pub mod rtccalicfg1;
#[doc = "INT_ENA_TIMERS (rw) register accessor: INT_ENA_TIMG_REG\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_ena_timers::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_ena_timers::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena_timers`] module"]
pub type INT_ENA_TIMERS = crate::Reg<int_ena_timers::INT_ENA_TIMERS_SPEC>;
#[doc = "INT_ENA_TIMG_REG"]
pub mod int_ena_timers;
#[doc = "INT_RAW_TIMERS (r) register accessor: INT_RAW_TIMG_REG\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_raw_timers::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw_timers`] module"]
pub type INT_RAW_TIMERS = crate::Reg<int_raw_timers::INT_RAW_TIMERS_SPEC>;
#[doc = "INT_RAW_TIMG_REG"]
pub mod int_raw_timers;
#[doc = "INT_ST_TIMERS (r) register accessor: INT_ST_TIMG_REG\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_st_timers::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st_timers`] module"]
pub type INT_ST_TIMERS = crate::Reg<int_st_timers::INT_ST_TIMERS_SPEC>;
#[doc = "INT_ST_TIMG_REG"]
pub mod int_st_timers;
#[doc = "INT_CLR_TIMERS (w) register accessor: INT_CLR_TIMG_REG\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_clr_timers::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr_timers`] module"]
pub type INT_CLR_TIMERS = crate::Reg<int_clr_timers::INT_CLR_TIMERS_SPEC>;
#[doc = "INT_CLR_TIMG_REG"]
pub mod int_clr_timers;
#[doc = "RTCCALICFG2 (rw) register accessor: TIMG_RTCCALICFG2_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rtccalicfg2::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`rtccalicfg2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtccalicfg2`] module"]
pub type RTCCALICFG2 = crate::Reg<rtccalicfg2::RTCCALICFG2_SPEC>;
#[doc = "TIMG_RTCCALICFG2_REG."]
pub mod rtccalicfg2;
#[doc = "NTIMG_DATE (rw) register accessor: TIMG_NTIMG_DATE_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ntimg_date::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ntimg_date::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ntimg_date`] module"]
pub type NTIMG_DATE = crate::Reg<ntimg_date::NTIMG_DATE_SPEC>;
#[doc = "TIMG_NTIMG_DATE_REG."]
pub mod ntimg_date;
#[doc = "REGCLK (rw) register accessor: TIMG_REGCLK_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`regclk::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`regclk::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@regclk`] module"]
pub type REGCLK = crate::Reg<regclk::REGCLK_SPEC>;
#[doc = "TIMG_REGCLK_REG."]
pub mod regclk;