#[doc = "Register `CLK_GATE` reader"]
pub type R = crate::R<CLK_GATE_SPEC>;
#[doc = "Register `CLK_GATE` writer"]
pub type W = crate::W<CLK_GATE_SPEC>;
#[doc = "Field `CLK_EN` reader - Set this bit to enable clk gate"]
pub type CLK_EN_R = crate::BitReader;
#[doc = "Field `CLK_EN` writer - Set this bit to enable clk gate"]
pub type CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `MST_CLK_ACTIVE` reader - Set this bit to power on the SPI module clock."]
pub type MST_CLK_ACTIVE_R = crate::BitReader;
#[doc = "Field `MST_CLK_ACTIVE` writer - Set this bit to power on the SPI module clock."]
pub type MST_CLK_ACTIVE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `MST_CLK_SEL` reader - This bit is used to select SPI module clock source in master mode. 1: PLL_CLK_80M. 0: XTAL CLK."]
pub type MST_CLK_SEL_R = crate::BitReader;
#[doc = "Field `MST_CLK_SEL` writer - This bit is used to select SPI module clock source in master mode. 1: PLL_CLK_80M. 0: XTAL CLK."]
pub type MST_CLK_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Bit 0 - Set this bit to enable clk gate"]
#[inline(always)]
pub fn clk_en(&self) -> CLK_EN_R {
CLK_EN_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - Set this bit to power on the SPI module clock."]
#[inline(always)]
pub fn mst_clk_active(&self) -> MST_CLK_ACTIVE_R {
MST_CLK_ACTIVE_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - This bit is used to select SPI module clock source in master mode. 1: PLL_CLK_80M. 0: XTAL CLK."]
#[inline(always)]
pub fn mst_clk_sel(&self) -> MST_CLK_SEL_R {
MST_CLK_SEL_R::new(((self.bits >> 2) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("CLK_GATE")
.field("clk_en", &self.clk_en())
.field("mst_clk_active", &self.mst_clk_active())
.field("mst_clk_sel", &self.mst_clk_sel())
.finish()
}
}
impl W {
#[doc = "Bit 0 - Set this bit to enable clk gate"]
#[inline(always)]
#[must_use]
pub fn clk_en(&mut self) -> CLK_EN_W<CLK_GATE_SPEC> {
CLK_EN_W::new(self, 0)
}
#[doc = "Bit 1 - Set this bit to power on the SPI module clock."]
#[inline(always)]
#[must_use]
pub fn mst_clk_active(&mut self) -> MST_CLK_ACTIVE_W<CLK_GATE_SPEC> {
MST_CLK_ACTIVE_W::new(self, 1)
}
#[doc = "Bit 2 - This bit is used to select SPI module clock source in master mode. 1: PLL_CLK_80M. 0: XTAL CLK."]
#[inline(always)]
#[must_use]
pub fn mst_clk_sel(&mut self) -> MST_CLK_SEL_W<CLK_GATE_SPEC> {
MST_CLK_SEL_W::new(self, 2)
}
}
#[doc = "SPI module clock and register clock control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`clk_gate::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`clk_gate::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct CLK_GATE_SPEC;
impl crate::RegisterSpec for CLK_GATE_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`clk_gate::R`](R) reader structure"]
impl crate::Readable for CLK_GATE_SPEC {}
#[doc = "`write(|w| ..)` method takes [`clk_gate::W`](W) writer structure"]
impl crate::Writable for CLK_GATE_SPEC {
type Safety = crate::Unsafe;
const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets CLK_GATE to value 0"]
impl crate::Resettable for CLK_GATE_SPEC {
const RESET_VALUE: u32 = 0;
}