#[doc = "Register `ANA_CONF` reader"]
pub type R = crate::R<ANA_CONF_SPEC>;
#[doc = "Register `ANA_CONF` writer"]
pub type W = crate::W<ANA_CONF_SPEC>;
#[doc = "Field `RESET_POR_FORCE_PD` reader - force no bypass i2c power on reset"]
pub type RESET_POR_FORCE_PD_R = crate::BitReader;
#[doc = "Field `RESET_POR_FORCE_PD` writer - force no bypass i2c power on reset"]
pub type RESET_POR_FORCE_PD_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RESET_POR_FORCE_PU` reader - force bypass i2c power on reset"]
pub type RESET_POR_FORCE_PU_R = crate::BitReader;
#[doc = "Field `RESET_POR_FORCE_PU` writer - force bypass i2c power on reset"]
pub type RESET_POR_FORCE_PU_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GLITCH_RST_EN` reader - enable glitch reset"]
pub type GLITCH_RST_EN_R = crate::BitReader;
#[doc = "Field `GLITCH_RST_EN` writer - enable glitch reset"]
pub type GLITCH_RST_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SAR_I2C_PU` reader - PLLA force power up"]
pub type SAR_I2C_PU_R = crate::BitReader;
#[doc = "Field `SAR_I2C_PU` writer - PLLA force power up"]
pub type SAR_I2C_PU_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLLA_FORCE_PD` reader - PLLA force power down"]
pub type PLLA_FORCE_PD_R = crate::BitReader;
#[doc = "Field `PLLA_FORCE_PD` writer - PLLA force power down"]
pub type PLLA_FORCE_PD_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLLA_FORCE_PU` reader - PLLA force power up"]
pub type PLLA_FORCE_PU_R = crate::BitReader;
#[doc = "Field `PLLA_FORCE_PU` writer - PLLA force power up"]
pub type PLLA_FORCE_PU_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `BBPLL_CAL_SLP_START` reader - start BBPLL calibration during sleep"]
pub type BBPLL_CAL_SLP_START_R = crate::BitReader;
#[doc = "Field `BBPLL_CAL_SLP_START` writer - start BBPLL calibration during sleep"]
pub type BBPLL_CAL_SLP_START_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PVTMON_PU` reader - 1: PVTMON power up"]
pub type PVTMON_PU_R = crate::BitReader;
#[doc = "Field `PVTMON_PU` writer - 1: PVTMON power up"]
pub type PVTMON_PU_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TXRF_I2C_PU` reader - 1: TXRF_I2C power up"]
pub type TXRF_I2C_PU_R = crate::BitReader;
#[doc = "Field `TXRF_I2C_PU` writer - 1: TXRF_I2C power up"]
pub type TXRF_I2C_PU_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RFRX_PBUS_PU` reader - 1: RFRX_PBUS power up"]
pub type RFRX_PBUS_PU_R = crate::BitReader;
#[doc = "Field `RFRX_PBUS_PU` writer - 1: RFRX_PBUS power up"]
pub type RFRX_PBUS_PU_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CKGEN_I2C_PU` reader - 1: CKGEN_I2C power up"]
pub type CKGEN_I2C_PU_R = crate::BitReader;
#[doc = "Field `CKGEN_I2C_PU` writer - 1: CKGEN_I2C power up"]
pub type CKGEN_I2C_PU_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLL_I2C_PU` reader - power up pll i2c"]
pub type PLL_I2C_PU_R = crate::BitReader;
#[doc = "Field `PLL_I2C_PU` writer - power up pll i2c"]
pub type PLL_I2C_PU_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Bit 18 - force no bypass i2c power on reset"]
#[inline(always)]
pub fn reset_por_force_pd(&self) -> RESET_POR_FORCE_PD_R {
RESET_POR_FORCE_PD_R::new(((self.bits >> 18) & 1) != 0)
}
#[doc = "Bit 19 - force bypass i2c power on reset"]
#[inline(always)]
pub fn reset_por_force_pu(&self) -> RESET_POR_FORCE_PU_R {
RESET_POR_FORCE_PU_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 20 - enable glitch reset"]
#[inline(always)]
pub fn glitch_rst_en(&self) -> GLITCH_RST_EN_R {
GLITCH_RST_EN_R::new(((self.bits >> 20) & 1) != 0)
}
#[doc = "Bit 22 - PLLA force power up"]
#[inline(always)]
pub fn sar_i2c_pu(&self) -> SAR_I2C_PU_R {
SAR_I2C_PU_R::new(((self.bits >> 22) & 1) != 0)
}
#[doc = "Bit 23 - PLLA force power down"]
#[inline(always)]
pub fn plla_force_pd(&self) -> PLLA_FORCE_PD_R {
PLLA_FORCE_PD_R::new(((self.bits >> 23) & 1) != 0)
}
#[doc = "Bit 24 - PLLA force power up"]
#[inline(always)]
pub fn plla_force_pu(&self) -> PLLA_FORCE_PU_R {
PLLA_FORCE_PU_R::new(((self.bits >> 24) & 1) != 0)
}
#[doc = "Bit 25 - start BBPLL calibration during sleep"]
#[inline(always)]
pub fn bbpll_cal_slp_start(&self) -> BBPLL_CAL_SLP_START_R {
BBPLL_CAL_SLP_START_R::new(((self.bits >> 25) & 1) != 0)
}
#[doc = "Bit 26 - 1: PVTMON power up"]
#[inline(always)]
pub fn pvtmon_pu(&self) -> PVTMON_PU_R {
PVTMON_PU_R::new(((self.bits >> 26) & 1) != 0)
}
#[doc = "Bit 27 - 1: TXRF_I2C power up"]
#[inline(always)]
pub fn txrf_i2c_pu(&self) -> TXRF_I2C_PU_R {
TXRF_I2C_PU_R::new(((self.bits >> 27) & 1) != 0)
}
#[doc = "Bit 28 - 1: RFRX_PBUS power up"]
#[inline(always)]
pub fn rfrx_pbus_pu(&self) -> RFRX_PBUS_PU_R {
RFRX_PBUS_PU_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 30 - 1: CKGEN_I2C power up"]
#[inline(always)]
pub fn ckgen_i2c_pu(&self) -> CKGEN_I2C_PU_R {
CKGEN_I2C_PU_R::new(((self.bits >> 30) & 1) != 0)
}
#[doc = "Bit 31 - power up pll i2c"]
#[inline(always)]
pub fn pll_i2c_pu(&self) -> PLL_I2C_PU_R {
PLL_I2C_PU_R::new(((self.bits >> 31) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("ANA_CONF")
.field("reset_por_force_pd", &self.reset_por_force_pd())
.field("reset_por_force_pu", &self.reset_por_force_pu())
.field("glitch_rst_en", &self.glitch_rst_en())
.field("sar_i2c_pu", &self.sar_i2c_pu())
.field("plla_force_pd", &self.plla_force_pd())
.field("plla_force_pu", &self.plla_force_pu())
.field("bbpll_cal_slp_start", &self.bbpll_cal_slp_start())
.field("pvtmon_pu", &self.pvtmon_pu())
.field("txrf_i2c_pu", &self.txrf_i2c_pu())
.field("rfrx_pbus_pu", &self.rfrx_pbus_pu())
.field("ckgen_i2c_pu", &self.ckgen_i2c_pu())
.field("pll_i2c_pu", &self.pll_i2c_pu())
.finish()
}
}
impl W {
#[doc = "Bit 18 - force no bypass i2c power on reset"]
#[inline(always)]
#[must_use]
pub fn reset_por_force_pd(&mut self) -> RESET_POR_FORCE_PD_W<ANA_CONF_SPEC> {
RESET_POR_FORCE_PD_W::new(self, 18)
}
#[doc = "Bit 19 - force bypass i2c power on reset"]
#[inline(always)]
#[must_use]
pub fn reset_por_force_pu(&mut self) -> RESET_POR_FORCE_PU_W<ANA_CONF_SPEC> {
RESET_POR_FORCE_PU_W::new(self, 19)
}
#[doc = "Bit 20 - enable glitch reset"]
#[inline(always)]
#[must_use]
pub fn glitch_rst_en(&mut self) -> GLITCH_RST_EN_W<ANA_CONF_SPEC> {
GLITCH_RST_EN_W::new(self, 20)
}
#[doc = "Bit 22 - PLLA force power up"]
#[inline(always)]
#[must_use]
pub fn sar_i2c_pu(&mut self) -> SAR_I2C_PU_W<ANA_CONF_SPEC> {
SAR_I2C_PU_W::new(self, 22)
}
#[doc = "Bit 23 - PLLA force power down"]
#[inline(always)]
#[must_use]
pub fn plla_force_pd(&mut self) -> PLLA_FORCE_PD_W<ANA_CONF_SPEC> {
PLLA_FORCE_PD_W::new(self, 23)
}
#[doc = "Bit 24 - PLLA force power up"]
#[inline(always)]
#[must_use]
pub fn plla_force_pu(&mut self) -> PLLA_FORCE_PU_W<ANA_CONF_SPEC> {
PLLA_FORCE_PU_W::new(self, 24)
}
#[doc = "Bit 25 - start BBPLL calibration during sleep"]
#[inline(always)]
#[must_use]
pub fn bbpll_cal_slp_start(&mut self) -> BBPLL_CAL_SLP_START_W<ANA_CONF_SPEC> {
BBPLL_CAL_SLP_START_W::new(self, 25)
}
#[doc = "Bit 26 - 1: PVTMON power up"]
#[inline(always)]
#[must_use]
pub fn pvtmon_pu(&mut self) -> PVTMON_PU_W<ANA_CONF_SPEC> {
PVTMON_PU_W::new(self, 26)
}
#[doc = "Bit 27 - 1: TXRF_I2C power up"]
#[inline(always)]
#[must_use]
pub fn txrf_i2c_pu(&mut self) -> TXRF_I2C_PU_W<ANA_CONF_SPEC> {
TXRF_I2C_PU_W::new(self, 27)
}
#[doc = "Bit 28 - 1: RFRX_PBUS power up"]
#[inline(always)]
#[must_use]
pub fn rfrx_pbus_pu(&mut self) -> RFRX_PBUS_PU_W<ANA_CONF_SPEC> {
RFRX_PBUS_PU_W::new(self, 28)
}
#[doc = "Bit 30 - 1: CKGEN_I2C power up"]
#[inline(always)]
#[must_use]
pub fn ckgen_i2c_pu(&mut self) -> CKGEN_I2C_PU_W<ANA_CONF_SPEC> {
CKGEN_I2C_PU_W::new(self, 30)
}
#[doc = "Bit 31 - power up pll i2c"]
#[inline(always)]
#[must_use]
pub fn pll_i2c_pu(&mut self) -> PLL_I2C_PU_W<ANA_CONF_SPEC> {
PLL_I2C_PU_W::new(self, 31)
}
}
#[doc = "rtc configure register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ana_conf::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ana_conf::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct ANA_CONF_SPEC;
impl crate::RegisterSpec for ANA_CONF_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`ana_conf::R`](R) reader structure"]
impl crate::Readable for ANA_CONF_SPEC {}
#[doc = "`write(|w| ..)` method takes [`ana_conf::W`](W) writer structure"]
impl crate::Writable for ANA_CONF_SPEC {
type Safety = crate::Unsafe;
const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets ANA_CONF to value 0x00c4_0000"]
impl crate::Resettable for ANA_CONF_SPEC {
const RESET_VALUE: u32 = 0x00c4_0000;
}