1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240

#[doc = "Register `RAW` reader"]
pub type R = crate::R<RAW_SPEC>;
#[doc = "Register `RAW` writer"]
pub type W = crate::W<RAW_SPEC>;
#[doc = "Field `IN_DONE` reader - The raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received for Rx channel 0."]
pub type IN_DONE_R = crate::BitReader;
#[doc = "Field `IN_DONE` writer - The raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received for Rx channel 0."]
pub type IN_DONE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `IN_SUC_EOF` reader - The raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received for Rx channel 0. For UHCI0, the raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received and no data error is detected for Rx channel 0."]
pub type IN_SUC_EOF_R = crate::BitReader;
#[doc = "Field `IN_SUC_EOF` writer - The raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received for Rx channel 0. For UHCI0, the raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received and no data error is detected for Rx channel 0."]
pub type IN_SUC_EOF_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `IN_ERR_EOF` reader - The raw interrupt bit turns to high level when data error is detected only in the case that the peripheral is UHCI0 for Rx channel 0. For other peripherals, this raw interrupt is reserved."]
pub type IN_ERR_EOF_R = crate::BitReader;
#[doc = "Field `IN_ERR_EOF` writer - The raw interrupt bit turns to high level when data error is detected only in the case that the peripheral is UHCI0 for Rx channel 0. For other peripherals, this raw interrupt is reserved."]
pub type IN_ERR_EOF_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_DONE` reader - The raw interrupt bit turns to high level when the last data pointed by one outlink descriptor has been transmitted to peripherals for Tx channel 0."]
pub type OUT_DONE_R = crate::BitReader;
#[doc = "Field `OUT_DONE` writer - The raw interrupt bit turns to high level when the last data pointed by one outlink descriptor has been transmitted to peripherals for Tx channel 0."]
pub type OUT_DONE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_EOF` reader - The raw interrupt bit turns to high level when the last data pointed by one outlink descriptor has been read from memory for Tx channel 0."]
pub type OUT_EOF_R = crate::BitReader;
#[doc = "Field `OUT_EOF` writer - The raw interrupt bit turns to high level when the last data pointed by one outlink descriptor has been read from memory for Tx channel 0."]
pub type OUT_EOF_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `IN_DSCR_ERR` reader - The raw interrupt bit turns to high level when detecting inlink descriptor error, including owner error, the second and third word error of inlink descriptor for Rx channel 0."]
pub type IN_DSCR_ERR_R = crate::BitReader;
#[doc = "Field `IN_DSCR_ERR` writer - The raw interrupt bit turns to high level when detecting inlink descriptor error, including owner error, the second and third word error of inlink descriptor for Rx channel 0."]
pub type IN_DSCR_ERR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_DSCR_ERR` reader - The raw interrupt bit turns to high level when detecting outlink descriptor error, including owner error, the second and third word error of outlink descriptor for Tx channel 0."]
pub type OUT_DSCR_ERR_R = crate::BitReader;
#[doc = "Field `OUT_DSCR_ERR` writer - The raw interrupt bit turns to high level when detecting outlink descriptor error, including owner error, the second and third word error of outlink descriptor for Tx channel 0."]
pub type OUT_DSCR_ERR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `IN_DSCR_EMPTY` reader - The raw interrupt bit turns to high level when Rx buffer pointed by inlink is full and receiving data is not completed, but there is no more inlink for Rx channel 0."]
pub type IN_DSCR_EMPTY_R = crate::BitReader;
#[doc = "Field `IN_DSCR_EMPTY` writer - The raw interrupt bit turns to high level when Rx buffer pointed by inlink is full and receiving data is not completed, but there is no more inlink for Rx channel 0."]
pub type IN_DSCR_EMPTY_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_TOTAL_EOF` reader - The raw interrupt bit turns to high level when data corresponding a outlink (includes one link descriptor or few link descriptors) is transmitted out for Tx channel 0."]
pub type OUT_TOTAL_EOF_R = crate::BitReader;
#[doc = "Field `OUT_TOTAL_EOF` writer - The raw interrupt bit turns to high level when data corresponding a outlink (includes one link descriptor or few link descriptors) is transmitted out for Tx channel 0."]
pub type OUT_TOTAL_EOF_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `INFIFO_OVF` reader - This raw interrupt bit turns to high level when level 1 fifo of Rx channel 0 is overflow."]
pub type INFIFO_OVF_R = crate::BitReader;
#[doc = "Field `INFIFO_OVF` writer - This raw interrupt bit turns to high level when level 1 fifo of Rx channel 0 is overflow."]
pub type INFIFO_OVF_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `INFIFO_UDF` reader - This raw interrupt bit turns to high level when level 1 fifo of Rx channel 0 is underflow."]
pub type INFIFO_UDF_R = crate::BitReader;
#[doc = "Field `INFIFO_UDF` writer - This raw interrupt bit turns to high level when level 1 fifo of Rx channel 0 is underflow."]
pub type INFIFO_UDF_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUTFIFO_OVF` reader - This raw interrupt bit turns to high level when level 1 fifo of Tx channel 0 is overflow."]
pub type OUTFIFO_OVF_R = crate::BitReader;
#[doc = "Field `OUTFIFO_OVF` writer - This raw interrupt bit turns to high level when level 1 fifo of Tx channel 0 is overflow."]
pub type OUTFIFO_OVF_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUTFIFO_UDF` reader - This raw interrupt bit turns to high level when level 1 fifo of Tx channel 0 is underflow."]
pub type OUTFIFO_UDF_R = crate::BitReader;
#[doc = "Field `OUTFIFO_UDF` writer - This raw interrupt bit turns to high level when level 1 fifo of Tx channel 0 is underflow."]
pub type OUTFIFO_UDF_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bit 0 - The raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received for Rx channel 0."]
    #[inline(always)]
    pub fn in_done(&self) -> IN_DONE_R {
        IN_DONE_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - The raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received for Rx channel 0. For UHCI0, the raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received and no data error is detected for Rx channel 0."]
    #[inline(always)]
    pub fn in_suc_eof(&self) -> IN_SUC_EOF_R {
        IN_SUC_EOF_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - The raw interrupt bit turns to high level when data error is detected only in the case that the peripheral is UHCI0 for Rx channel 0. For other peripherals, this raw interrupt is reserved."]
    #[inline(always)]
    pub fn in_err_eof(&self) -> IN_ERR_EOF_R {
        IN_ERR_EOF_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - The raw interrupt bit turns to high level when the last data pointed by one outlink descriptor has been transmitted to peripherals for Tx channel 0."]
    #[inline(always)]
    pub fn out_done(&self) -> OUT_DONE_R {
        OUT_DONE_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - The raw interrupt bit turns to high level when the last data pointed by one outlink descriptor has been read from memory for Tx channel 0."]
    #[inline(always)]
    pub fn out_eof(&self) -> OUT_EOF_R {
        OUT_EOF_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - The raw interrupt bit turns to high level when detecting inlink descriptor error, including owner error, the second and third word error of inlink descriptor for Rx channel 0."]
    #[inline(always)]
    pub fn in_dscr_err(&self) -> IN_DSCR_ERR_R {
        IN_DSCR_ERR_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6 - The raw interrupt bit turns to high level when detecting outlink descriptor error, including owner error, the second and third word error of outlink descriptor for Tx channel 0."]
    #[inline(always)]
    pub fn out_dscr_err(&self) -> OUT_DSCR_ERR_R {
        OUT_DSCR_ERR_R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 7 - The raw interrupt bit turns to high level when Rx buffer pointed by inlink is full and receiving data is not completed, but there is no more inlink for Rx channel 0."]
    #[inline(always)]
    pub fn in_dscr_empty(&self) -> IN_DSCR_EMPTY_R {
        IN_DSCR_EMPTY_R::new(((self.bits >> 7) & 1) != 0)
    }
    #[doc = "Bit 8 - The raw interrupt bit turns to high level when data corresponding a outlink (includes one link descriptor or few link descriptors) is transmitted out for Tx channel 0."]
    #[inline(always)]
    pub fn out_total_eof(&self) -> OUT_TOTAL_EOF_R {
        OUT_TOTAL_EOF_R::new(((self.bits >> 8) & 1) != 0)
    }
    #[doc = "Bit 9 - This raw interrupt bit turns to high level when level 1 fifo of Rx channel 0 is overflow."]
    #[inline(always)]
    pub fn infifo_ovf(&self) -> INFIFO_OVF_R {
        INFIFO_OVF_R::new(((self.bits >> 9) & 1) != 0)
    }
    #[doc = "Bit 10 - This raw interrupt bit turns to high level when level 1 fifo of Rx channel 0 is underflow."]
    #[inline(always)]
    pub fn infifo_udf(&self) -> INFIFO_UDF_R {
        INFIFO_UDF_R::new(((self.bits >> 10) & 1) != 0)
    }
    #[doc = "Bit 11 - This raw interrupt bit turns to high level when level 1 fifo of Tx channel 0 is overflow."]
    #[inline(always)]
    pub fn outfifo_ovf(&self) -> OUTFIFO_OVF_R {
        OUTFIFO_OVF_R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bit 12 - This raw interrupt bit turns to high level when level 1 fifo of Tx channel 0 is underflow."]
    #[inline(always)]
    pub fn outfifo_udf(&self) -> OUTFIFO_UDF_R {
        OUTFIFO_UDF_R::new(((self.bits >> 12) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("RAW")
            .field("in_done", &self.in_done())
            .field("in_suc_eof", &self.in_suc_eof())
            .field("in_err_eof", &self.in_err_eof())
            .field("out_done", &self.out_done())
            .field("out_eof", &self.out_eof())
            .field("in_dscr_err", &self.in_dscr_err())
            .field("out_dscr_err", &self.out_dscr_err())
            .field("in_dscr_empty", &self.in_dscr_empty())
            .field("out_total_eof", &self.out_total_eof())
            .field("infifo_ovf", &self.infifo_ovf())
            .field("infifo_udf", &self.infifo_udf())
            .field("outfifo_ovf", &self.outfifo_ovf())
            .field("outfifo_udf", &self.outfifo_udf())
            .finish()
    }
}
impl W {
    #[doc = "Bit 0 - The raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received for Rx channel 0."]
    #[inline(always)]
    #[must_use]
    pub fn in_done(&mut self) -> IN_DONE_W<RAW_SPEC> {
        IN_DONE_W::new(self, 0)
    }
    #[doc = "Bit 1 - The raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received for Rx channel 0. For UHCI0, the raw interrupt bit turns to high level when the last data pointed by one inlink descriptor has been received and no data error is detected for Rx channel 0."]
    #[inline(always)]
    #[must_use]
    pub fn in_suc_eof(&mut self) -> IN_SUC_EOF_W<RAW_SPEC> {
        IN_SUC_EOF_W::new(self, 1)
    }
    #[doc = "Bit 2 - The raw interrupt bit turns to high level when data error is detected only in the case that the peripheral is UHCI0 for Rx channel 0. For other peripherals, this raw interrupt is reserved."]
    #[inline(always)]
    #[must_use]
    pub fn in_err_eof(&mut self) -> IN_ERR_EOF_W<RAW_SPEC> {
        IN_ERR_EOF_W::new(self, 2)
    }
    #[doc = "Bit 3 - The raw interrupt bit turns to high level when the last data pointed by one outlink descriptor has been transmitted to peripherals for Tx channel 0."]
    #[inline(always)]
    #[must_use]
    pub fn out_done(&mut self) -> OUT_DONE_W<RAW_SPEC> {
        OUT_DONE_W::new(self, 3)
    }
    #[doc = "Bit 4 - The raw interrupt bit turns to high level when the last data pointed by one outlink descriptor has been read from memory for Tx channel 0."]
    #[inline(always)]
    #[must_use]
    pub fn out_eof(&mut self) -> OUT_EOF_W<RAW_SPEC> {
        OUT_EOF_W::new(self, 4)
    }
    #[doc = "Bit 5 - The raw interrupt bit turns to high level when detecting inlink descriptor error, including owner error, the second and third word error of inlink descriptor for Rx channel 0."]
    #[inline(always)]
    #[must_use]
    pub fn in_dscr_err(&mut self) -> IN_DSCR_ERR_W<RAW_SPEC> {
        IN_DSCR_ERR_W::new(self, 5)
    }
    #[doc = "Bit 6 - The raw interrupt bit turns to high level when detecting outlink descriptor error, including owner error, the second and third word error of outlink descriptor for Tx channel 0."]
    #[inline(always)]
    #[must_use]
    pub fn out_dscr_err(&mut self) -> OUT_DSCR_ERR_W<RAW_SPEC> {
        OUT_DSCR_ERR_W::new(self, 6)
    }
    #[doc = "Bit 7 - The raw interrupt bit turns to high level when Rx buffer pointed by inlink is full and receiving data is not completed, but there is no more inlink for Rx channel 0."]
    #[inline(always)]
    #[must_use]
    pub fn in_dscr_empty(&mut self) -> IN_DSCR_EMPTY_W<RAW_SPEC> {
        IN_DSCR_EMPTY_W::new(self, 7)
    }
    #[doc = "Bit 8 - The raw interrupt bit turns to high level when data corresponding a outlink (includes one link descriptor or few link descriptors) is transmitted out for Tx channel 0."]
    #[inline(always)]
    #[must_use]
    pub fn out_total_eof(&mut self) -> OUT_TOTAL_EOF_W<RAW_SPEC> {
        OUT_TOTAL_EOF_W::new(self, 8)
    }
    #[doc = "Bit 9 - This raw interrupt bit turns to high level when level 1 fifo of Rx channel 0 is overflow."]
    #[inline(always)]
    #[must_use]
    pub fn infifo_ovf(&mut self) -> INFIFO_OVF_W<RAW_SPEC> {
        INFIFO_OVF_W::new(self, 9)
    }
    #[doc = "Bit 10 - This raw interrupt bit turns to high level when level 1 fifo of Rx channel 0 is underflow."]
    #[inline(always)]
    #[must_use]
    pub fn infifo_udf(&mut self) -> INFIFO_UDF_W<RAW_SPEC> {
        INFIFO_UDF_W::new(self, 10)
    }
    #[doc = "Bit 11 - This raw interrupt bit turns to high level when level 1 fifo of Tx channel 0 is overflow."]
    #[inline(always)]
    #[must_use]
    pub fn outfifo_ovf(&mut self) -> OUTFIFO_OVF_W<RAW_SPEC> {
        OUTFIFO_OVF_W::new(self, 11)
    }
    #[doc = "Bit 12 - This raw interrupt bit turns to high level when level 1 fifo of Tx channel 0 is underflow."]
    #[inline(always)]
    #[must_use]
    pub fn outfifo_udf(&mut self) -> OUTFIFO_UDF_W<RAW_SPEC> {
        OUTFIFO_UDF_W::new(self, 12)
    }
}
#[doc = "DMA_INT_RAW_CH0_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`raw::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`raw::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct RAW_SPEC;
impl crate::RegisterSpec for RAW_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`raw::R`](R) reader structure"]
impl crate::Readable for RAW_SPEC {}
#[doc = "`write(|w| ..)` method takes [`raw::W`](W) writer structure"]
impl crate::Writable for RAW_SPEC {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets RAW to value 0"]
impl crate::Resettable for RAW_SPEC {
    const RESET_VALUE: u32 = 0;
}