1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128

#[doc = "Register `OUT_CONF0` reader"]
pub type R = crate::R<OUT_CONF0_SPEC>;
#[doc = "Register `OUT_CONF0` writer"]
pub type W = crate::W<OUT_CONF0_SPEC>;
#[doc = "Field `OUT_RST` reader - This bit is used to reset DMA channel 0 Tx FSM and Tx FIFO pointer."]
pub type OUT_RST_R = crate::BitReader;
#[doc = "Field `OUT_RST` writer - This bit is used to reset DMA channel 0 Tx FSM and Tx FIFO pointer."]
pub type OUT_RST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_LOOP_TEST` reader - reserved"]
pub type OUT_LOOP_TEST_R = crate::BitReader;
#[doc = "Field `OUT_LOOP_TEST` writer - reserved"]
pub type OUT_LOOP_TEST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_AUTO_WRBACK` reader - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted."]
pub type OUT_AUTO_WRBACK_R = crate::BitReader;
#[doc = "Field `OUT_AUTO_WRBACK` writer - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted."]
pub type OUT_AUTO_WRBACK_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_EOF_MODE` reader - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 0 is generated when data need to transmit has been popped from FIFO in DMA"]
pub type OUT_EOF_MODE_R = crate::BitReader;
#[doc = "Field `OUT_EOF_MODE` writer - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 0 is generated when data need to transmit has been popped from FIFO in DMA"]
pub type OUT_EOF_MODE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUTDSCR_BURST_EN` reader - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 reading link descriptor when accessing internal SRAM."]
pub type OUTDSCR_BURST_EN_R = crate::BitReader;
#[doc = "Field `OUTDSCR_BURST_EN` writer - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 reading link descriptor when accessing internal SRAM."]
pub type OUTDSCR_BURST_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OUT_DATA_BURST_EN` reader - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 transmitting data when accessing internal SRAM."]
pub type OUT_DATA_BURST_EN_R = crate::BitReader;
#[doc = "Field `OUT_DATA_BURST_EN` writer - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 transmitting data when accessing internal SRAM."]
pub type OUT_DATA_BURST_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bit 0 - This bit is used to reset DMA channel 0 Tx FSM and Tx FIFO pointer."]
    #[inline(always)]
    pub fn out_rst(&self) -> OUT_RST_R {
        OUT_RST_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - reserved"]
    #[inline(always)]
    pub fn out_loop_test(&self) -> OUT_LOOP_TEST_R {
        OUT_LOOP_TEST_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted."]
    #[inline(always)]
    pub fn out_auto_wrback(&self) -> OUT_AUTO_WRBACK_R {
        OUT_AUTO_WRBACK_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 0 is generated when data need to transmit has been popped from FIFO in DMA"]
    #[inline(always)]
    pub fn out_eof_mode(&self) -> OUT_EOF_MODE_R {
        OUT_EOF_MODE_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 reading link descriptor when accessing internal SRAM."]
    #[inline(always)]
    pub fn outdscr_burst_en(&self) -> OUTDSCR_BURST_EN_R {
        OUTDSCR_BURST_EN_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 transmitting data when accessing internal SRAM."]
    #[inline(always)]
    pub fn out_data_burst_en(&self) -> OUT_DATA_BURST_EN_R {
        OUT_DATA_BURST_EN_R::new(((self.bits >> 5) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("OUT_CONF0")
            .field("out_rst", &self.out_rst())
            .field("out_loop_test", &self.out_loop_test())
            .field("out_auto_wrback", &self.out_auto_wrback())
            .field("out_eof_mode", &self.out_eof_mode())
            .field("outdscr_burst_en", &self.outdscr_burst_en())
            .field("out_data_burst_en", &self.out_data_burst_en())
            .finish()
    }
}
impl W {
    #[doc = "Bit 0 - This bit is used to reset DMA channel 0 Tx FSM and Tx FIFO pointer."]
    #[inline(always)]
    #[must_use]
    pub fn out_rst(&mut self) -> OUT_RST_W<OUT_CONF0_SPEC> {
        OUT_RST_W::new(self, 0)
    }
    #[doc = "Bit 1 - reserved"]
    #[inline(always)]
    #[must_use]
    pub fn out_loop_test(&mut self) -> OUT_LOOP_TEST_W<OUT_CONF0_SPEC> {
        OUT_LOOP_TEST_W::new(self, 1)
    }
    #[doc = "Bit 2 - Set this bit to enable automatic outlink-writeback when all the data in tx buffer has been transmitted."]
    #[inline(always)]
    #[must_use]
    pub fn out_auto_wrback(&mut self) -> OUT_AUTO_WRBACK_W<OUT_CONF0_SPEC> {
        OUT_AUTO_WRBACK_W::new(self, 2)
    }
    #[doc = "Bit 3 - EOF flag generation mode when transmitting data. 1: EOF flag for Tx channel 0 is generated when data need to transmit has been popped from FIFO in DMA"]
    #[inline(always)]
    #[must_use]
    pub fn out_eof_mode(&mut self) -> OUT_EOF_MODE_W<OUT_CONF0_SPEC> {
        OUT_EOF_MODE_W::new(self, 3)
    }
    #[doc = "Bit 4 - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 reading link descriptor when accessing internal SRAM."]
    #[inline(always)]
    #[must_use]
    pub fn outdscr_burst_en(&mut self) -> OUTDSCR_BURST_EN_W<OUT_CONF0_SPEC> {
        OUTDSCR_BURST_EN_W::new(self, 4)
    }
    #[doc = "Bit 5 - Set this bit to 1 to enable INCR burst transfer for Tx channel 0 transmitting data when accessing internal SRAM."]
    #[inline(always)]
    #[must_use]
    pub fn out_data_burst_en(&mut self) -> OUT_DATA_BURST_EN_W<OUT_CONF0_SPEC> {
        OUT_DATA_BURST_EN_W::new(self, 5)
    }
}
#[doc = "DMA_OUT_CONF0_CH0_REG.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`out_conf0::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`out_conf0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct OUT_CONF0_SPEC;
impl crate::RegisterSpec for OUT_CONF0_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`out_conf0::R`](R) reader structure"]
impl crate::Readable for OUT_CONF0_SPEC {}
#[doc = "`write(|w| ..)` method takes [`out_conf0::W`](W) writer structure"]
impl crate::Writable for OUT_CONF0_SPEC {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets OUT_CONF0 to value 0x08"]
impl crate::Resettable for OUT_CONF0_SPEC {
    const RESET_VALUE: u32 = 0x08;
}