Module esp32c2::dma::in_conf0_ch0

source ·
Expand description

DMA_IN_CONF0_CH0_REG.

Structs

Type Aliases

  • INDSCR_BURST_EN_R
    Field INDSCR_BURST_EN reader - Set this bit to 1 to enable INCR burst transfer for Rx channel 0 reading link descriptor when accessing internal SRAM.
  • INDSCR_BURST_EN_W
    Field INDSCR_BURST_EN writer - Set this bit to 1 to enable INCR burst transfer for Rx channel 0 reading link descriptor when accessing internal SRAM.
  • IN_DATA_BURST_EN_R
    Field IN_DATA_BURST_EN reader - Set this bit to 1 to enable INCR burst transfer for Rx channel 0 receiving data when accessing internal SRAM.
  • IN_DATA_BURST_EN_W
    Field IN_DATA_BURST_EN writer - Set this bit to 1 to enable INCR burst transfer for Rx channel 0 receiving data when accessing internal SRAM.
  • IN_LOOP_TEST_R
    Field IN_LOOP_TEST reader - reserved
  • IN_LOOP_TEST_W
    Field IN_LOOP_TEST writer - reserved
  • IN_RST_R
    Field IN_RST reader - This bit is used to reset DMA channel 0 Rx FSM and Rx FIFO pointer.
  • IN_RST_W
    Field IN_RST writer - This bit is used to reset DMA channel 0 Rx FSM and Rx FIFO pointer.
  • MEM_TRANS_EN_R
    Field MEM_TRANS_EN reader - Set this bit 1 to enable automatic transmitting data from memory to memory via DMA.
  • MEM_TRANS_EN_W
    Field MEM_TRANS_EN writer - Set this bit 1 to enable automatic transmitting data from memory to memory via DMA.
  • R
    Register IN_CONF0_CH0 reader
  • W
    Register IN_CONF0_CH0 writer