#[doc = r"Register block"]
#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
pub struct RegisterBlock {
scl_low_period: SCL_LOW_PERIOD,
ctrl: CTRL,
debug_status: DEBUG_STATUS,
timeout: TIMEOUT,
slave_addr: SLAVE_ADDR,
_reserved5: [u8; 0x08],
data: DATA,
int_raw: INT_RAW,
int_clr: INT_CLR,
int_en: INT_EN,
int_st: INT_ST,
sda_duty: SDA_DUTY,
_reserved11: [u8; 0x04],
scl_high_period: SCL_HIGH_PERIOD,
_reserved12: [u8; 0x04],
scl_start_period: SCL_START_PERIOD,
scl_stop_period: SCL_STOP_PERIOD,
cmd: CMD,
}
impl RegisterBlock {
#[doc = "0x00 - "]
#[inline(always)]
pub const fn scl_low_period(&self) -> &SCL_LOW_PERIOD {
&self.scl_low_period
}
#[doc = "0x04 - "]
#[inline(always)]
pub const fn ctrl(&self) -> &CTRL {
&self.ctrl
}
#[doc = "0x08 - "]
#[inline(always)]
pub const fn debug_status(&self) -> &DEBUG_STATUS {
&self.debug_status
}
#[doc = "0x0c - "]
#[inline(always)]
pub const fn timeout(&self) -> &TIMEOUT {
&self.timeout
}
#[doc = "0x10 - "]
#[inline(always)]
pub const fn slave_addr(&self) -> &SLAVE_ADDR {
&self.slave_addr
}
#[doc = "0x1c - "]
#[inline(always)]
pub const fn data(&self) -> &DATA {
&self.data
}
#[doc = "0x20 - "]
#[inline(always)]
pub const fn int_raw(&self) -> &INT_RAW {
&self.int_raw
}
#[doc = "0x24 - "]
#[inline(always)]
pub const fn int_clr(&self) -> &INT_CLR {
&self.int_clr
}
#[doc = "0x28 - "]
#[inline(always)]
pub const fn int_en(&self) -> &INT_EN {
&self.int_en
}
#[doc = "0x2c - "]
#[inline(always)]
pub const fn int_st(&self) -> &INT_ST {
&self.int_st
}
#[doc = "0x30 - "]
#[inline(always)]
pub const fn sda_duty(&self) -> &SDA_DUTY {
&self.sda_duty
}
#[doc = "0x38 - "]
#[inline(always)]
pub const fn scl_high_period(&self) -> &SCL_HIGH_PERIOD {
&self.scl_high_period
}
#[doc = "0x40 - "]
#[inline(always)]
pub const fn scl_start_period(&self) -> &SCL_START_PERIOD {
&self.scl_start_period
}
#[doc = "0x44 - "]
#[inline(always)]
pub const fn scl_stop_period(&self) -> &SCL_STOP_PERIOD {
&self.scl_stop_period
}
#[doc = "0x48 - "]
#[inline(always)]
pub const fn cmd(&self) -> &CMD {
&self.cmd
}
}
#[doc = "SCL_LOW_PERIOD (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`scl_low_period::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`scl_low_period::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@scl_low_period`] module"]
pub type SCL_LOW_PERIOD = crate::Reg<scl_low_period::SCL_LOW_PERIOD_SPEC>;
#[doc = ""]
pub mod scl_low_period;
#[doc = "CTRL (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrl`] module"]
pub type CTRL = crate::Reg<ctrl::CTRL_SPEC>;
#[doc = ""]
pub mod ctrl;
#[doc = "DEBUG_STATUS (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`debug_status::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`debug_status::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@debug_status`] module"]
pub type DEBUG_STATUS = crate::Reg<debug_status::DEBUG_STATUS_SPEC>;
#[doc = ""]
pub mod debug_status;
#[doc = "TIMEOUT (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timeout::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timeout::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timeout`] module"]
pub type TIMEOUT = crate::Reg<timeout::TIMEOUT_SPEC>;
#[doc = ""]
pub mod timeout;
#[doc = "SLAVE_ADDR (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`slave_addr::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`slave_addr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@slave_addr`] module"]
pub type SLAVE_ADDR = crate::Reg<slave_addr::SLAVE_ADDR_SPEC>;
#[doc = ""]
pub mod slave_addr;
#[doc = "DATA (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data`] module"]
pub type DATA = crate::Reg<data::DATA_SPEC>;
#[doc = ""]
pub mod data;
#[doc = "INT_RAW (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_raw::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_raw::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = ""]
pub mod int_raw;
#[doc = "INT_CLR (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_clr::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_clr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = ""]
pub mod int_clr;
#[doc = "INT_EN (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_en::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_en::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_en`] module"]
pub type INT_EN = crate::Reg<int_en::INT_EN_SPEC>;
#[doc = ""]
pub mod int_en;
#[doc = "INT_ST (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_st::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_st::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = ""]
pub mod int_st;
#[doc = "SDA_DUTY (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`sda_duty::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sda_duty::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sda_duty`] module"]
pub type SDA_DUTY = crate::Reg<sda_duty::SDA_DUTY_SPEC>;
#[doc = ""]
pub mod sda_duty;
#[doc = "SCL_HIGH_PERIOD (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`scl_high_period::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`scl_high_period::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@scl_high_period`] module"]
pub type SCL_HIGH_PERIOD = crate::Reg<scl_high_period::SCL_HIGH_PERIOD_SPEC>;
#[doc = ""]
pub mod scl_high_period;
#[doc = "SCL_START_PERIOD (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`scl_start_period::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`scl_start_period::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@scl_start_period`] module"]
pub type SCL_START_PERIOD = crate::Reg<scl_start_period::SCL_START_PERIOD_SPEC>;
#[doc = ""]
pub mod scl_start_period;
#[doc = "SCL_STOP_PERIOD (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`scl_stop_period::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`scl_stop_period::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@scl_stop_period`] module"]
pub type SCL_STOP_PERIOD = crate::Reg<scl_stop_period::SCL_STOP_PERIOD_SPEC>;
#[doc = ""]
pub mod scl_stop_period;
#[doc = "CMD (rw) register accessor: \n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmd::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmd::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmd`] module"]
pub type CMD = crate::Reg<cmd::CMD_SPEC>;
#[doc = ""]
pub mod cmd;