Struct W 

pub struct W(/* private fields */);

Register GPIO_INTR writer

Implementations

impl W

pub fn gpio_0_intr(&mut self) -> GPIO_0_INTR_W<'_>

Bit 0 - Active high edge interrupt detected for GPIO_0. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn gpio_1_intr(&mut self) -> GPIO_1_INTR_W<'_>

Bit 1 - Active high edge interrupt detected for GPIO_1. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn gpio_2_intr(&mut self) -> GPIO_2_INTR_W<'_>

Bit 2 - Active high edge interrupt detected for GPIO_2. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn gpio_3_intr(&mut self) -> GPIO_3_INTR_W<'_>

Bit 3 - Active high edge interrupt detected for GPIO_3. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn gpio_4_intr(&mut self) -> GPIO_4_INTR_W<'_>

Bit 4 - Active high edge interrupt detected for GPIO_4. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn gpio_5_intr(&mut self) -> GPIO_5_INTR_W<'_>

Bit 5 - Active high edge interrupt detected for GPIO_5. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn gpio_6_intr(&mut self) -> GPIO_6_INTR_W<'_>

Bit 6 - Active high edge interrupt detected for GPIO_6. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn gpio_7_intr(&mut self) -> GPIO_7_INTR_W<'_>

Bit 7 - Active high edge interrupt detected for GPIO_7. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<GPIO_INTR_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<GPIO_INTR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<GPIO_INTR_SPEC>> for W

fn from(writer: W<GPIO_INTR_SPEC>) -> Self

Converts to this type from the input type.