Struct R 

pub struct R(/* private fields */);

Register FFE_INTR reader

Implementations

impl R

pub fn ffe0_0_intr(&self) -> FFE0_0_INTR_R

Bit 0 - Active high edge interrupt detected for FFE0_0. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn ffe0_1_intr(&self) -> FFE0_1_INTR_R

Bit 1 - Active high edge interrupt detected for FFE0_1. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn ffe0_2_intr(&self) -> FFE0_2_INTR_R

Bit 2 - Active high edge interrupt detected for FFE0_2. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn ffe0_3_intr(&self) -> FFE0_3_INTR_R

Bit 3 - Active high edge interrupt detected for FFE0_3. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn ffe0_4_intr(&self) -> FFE0_4_INTR_R

Bit 4 - Active high edge interrupt detected for FFE0_4. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn ffe0_5_intr(&self) -> FFE0_5_INTR_R

Bit 5 - Active high edge interrupt detected for FFE0_5. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn ffe0_6_intr(&self) -> FFE0_6_INTR_R

Bit 6 - Active high edge interrupt detected for FFE0_6. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

pub fn ffe0_7_intr(&self) -> FFE0_7_INTR_R

Bit 7 - Active high edge interrupt detected for FFE0_7. When interrupt type is selected as edge detect, this register will return high when triggered, write 1 to clear.

Methods from Deref<Target = R<FFE_INTR_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<FFE_INTR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<FFE_INTR_SPEC>> for R

fn from(reader: R<FFE_INTR_SPEC>) -> Self

Converts to this type from the input type.