[−][src]Enum drs_0x01::addr::WritableRamAddr
This enum represent all the RAM (volatile) memory addresses which can be written to. I comes from the page 24 of the datasheet.
Variants
ID(u8)
Servo ID
AckPolicy(u8)
TODO : Refer to pg 33
AlarmLEDPolicy(u8)
Activates LED according to Policy
TorquePolicy(u8)
Releases Torque accroding to Policy
MaxTemperature(u8)
Maximum allowed temperature (0xDF = 85°C)
MinVoltage(u8)
Minimum allowed voltage (0x5B = 6.714 VDC)
MaxVoltage(u8)
Maximum allowed voltage (0x89 = 10 VDC)
AccelerationRatio(u8)
Ratio of time to reach goal position to acceleration or deceleration
MaxAcceleration(u8)
Max acceleration time, 11.2ms interval. Acceleration(0x2D : 504 ms)
DeadZone(u8)
Outside controle range
SaturatorOffset(u8)
TODO : Refer to datasheet page 36
SaturatorSlope(u8, u8)
TODO : Refer to datasheet page 36
PWMOffset(u8)
PWM Offset value, refer to datasheet page 37
MinPWM(u8)
Set minimum PWM value, refer to the datasheet page 37
MaxPWM(u8, u8)
Set maximum PWM value, refer to the datasheet page 37
OverloadPWMThreshold(u8, u8)
Set PWM Overload thershold range, refer to the datasheet page 34
MinPosition(u8, u8)
Minimum position value (between 0 and 1023)
MaxPosition(u8, u8)
Maximum position value (between 0 and 1023)
PositionKp(u8, u8)
Proportional gain
PositionKd(u8, u8)
Derivative gain
PositionKi(u8, u8)
Integral gain
PositionFFFirstGain(u8, u8)
Refer to the datasheet page 35
PositionFFSecondGain(u8, u8)
Refer to the datasheet page 35
LedBlinkPeriod(u8)
Alarm LED blink period according to Policy 11.2ms/Tick (0x2D : 504 ms)
ADCFaultDetectionPeriod(u8)
Temp/Voltage error check interval. 11.2ms/tick (0x2D : 504 ms)
PacketGarbageDetectionPeriod(u8)
Packet error check interval. 11.2ms/tick (0x12 : 201 ms)
StopDetectionPeriod(u8)
Stop detection check interval. 11.2ms/tick (0x1B : 302 ms)
OverloadDetectionPeriod(u8)
Overload check interbal. 11.2ms/tick (0x96 : 1.68 s)
StopThreshold(u8)
Stop Threshold
InpositionMargin(u8)
Offset Threshold
CalibrationDifference(u8)
Servo compensation
StatusError(u8)
Refer to datasheet page 39
StatusDetail(u8)
Refer to datasheet page 39
TorqueControl(u8)
Torque enable states (refer to datasheet page 28)
LEDControl(u8)
0x01 : Green, 0x02 : Blue, 0x04 : Red
Methods
impl WritableRamAddr
[src]
Trait Implementations
impl PartialEq<WritableRamAddr> for WritableRamAddr
[src]
fn eq(&self, other: &WritableRamAddr) -> bool
[src]
fn ne(&self, other: &WritableRamAddr) -> bool
[src]
impl Eq for WritableRamAddr
[src]
impl Copy for WritableRamAddr
[src]
impl Debug for WritableRamAddr
[src]
impl From<WritableRamAddr> for u8
[src]
fn from(addr: WritableRamAddr) -> Self
[src]
impl Clone for WritableRamAddr
[src]
fn clone(&self) -> WritableRamAddr
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl TryFrom<u8> for WritableRamAddr
[src]
Auto Trait Implementations
impl Send for WritableRamAddr
impl Sync for WritableRamAddr
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,