#[doc = "Reader of register IOCR8"]
pub type R = crate::R<u32, super::IOCR8>;
#[doc = "Writer for register IOCR8"]
pub type W = crate::W<u32, super::IOCR8>;
#[doc = "Register IOCR8 `reset()`'s with value 0"]
impl crate::ResetValue for super::IOCR8 {
type Type = u32;
#[inline(always)]
fn reset_value() -> Self::Type {
0
}
}
#[doc = "Port Control for Port n Pin 8 to 11\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum PC8_A {
#[doc = "0: Input - No internal pull device active"]
VALUE1,
#[doc = "1: Input - Internal pull-down device active"]
VALUE2,
#[doc = "2: Input - Internal pull-up device active"]
VALUE3,
#[doc = "3: Input - No internal pull device, Pn_OUTx = input value"]
VALUE4,
#[doc = "4: Input inverted - No internal pull device active"]
VALUE5,
#[doc = "5: Input inverted - Internal pull-down device active"]
VALUE6,
#[doc = "6: Input inverted - Internal pull-up device active"]
VALUE7,
#[doc = "7: Input inverted - No internal pull device, Pn_OUTx = input value"]
VALUE8,
#[doc = "16: Output Push-Pull - General-purpose output"]
VALUE9,
#[doc = "17: Output Push-Pull - Alternate output function 1"]
VALUE10,
#[doc = "18: Output Push-Pull - Alternate output function 2"]
VALUE11,
#[doc = "19: Output Push-Pull - Alternate output function 3"]
VALUE12,
#[doc = "20: Output Push-Pull - Alternate output function 4"]
VALUE13,
#[doc = "24: Output Open Drain - General-purpose output"]
VALUE14,
#[doc = "25: Output Open Drain - Alternate output function 1"]
VALUE15,
#[doc = "26: Output Open Drain - Alternate output function 2"]
VALUE16,
#[doc = "27: Output Open Drain - Alternate output function 3"]
VALUE17,
#[doc = "28: Output Open Drain - Alternate output function 4"]
VALUE18,
}
impl From<PC8_A> for u8 {
#[inline(always)]
fn from(variant: PC8_A) -> Self {
match variant {
PC8_A::VALUE1 => 0,
PC8_A::VALUE2 => 1,
PC8_A::VALUE3 => 2,
PC8_A::VALUE4 => 3,
PC8_A::VALUE5 => 4,
PC8_A::VALUE6 => 5,
PC8_A::VALUE7 => 6,
PC8_A::VALUE8 => 7,
PC8_A::VALUE9 => 16,
PC8_A::VALUE10 => 17,
PC8_A::VALUE11 => 18,
PC8_A::VALUE12 => 19,
PC8_A::VALUE13 => 20,
PC8_A::VALUE14 => 24,
PC8_A::VALUE15 => 25,
PC8_A::VALUE16 => 26,
PC8_A::VALUE17 => 27,
PC8_A::VALUE18 => 28,
}
}
}
#[doc = "Reader of field `PC8`"]
pub type PC8_R = crate::R<u8, PC8_A>;
impl PC8_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> crate::Variant<u8, PC8_A> {
use crate::Variant::*;
match self.bits {
0 => Val(PC8_A::VALUE1),
1 => Val(PC8_A::VALUE2),
2 => Val(PC8_A::VALUE3),
3 => Val(PC8_A::VALUE4),
4 => Val(PC8_A::VALUE5),
5 => Val(PC8_A::VALUE6),
6 => Val(PC8_A::VALUE7),
7 => Val(PC8_A::VALUE8),
16 => Val(PC8_A::VALUE9),
17 => Val(PC8_A::VALUE10),
18 => Val(PC8_A::VALUE11),
19 => Val(PC8_A::VALUE12),
20 => Val(PC8_A::VALUE13),
24 => Val(PC8_A::VALUE14),
25 => Val(PC8_A::VALUE15),
26 => Val(PC8_A::VALUE16),
27 => Val(PC8_A::VALUE17),
28 => Val(PC8_A::VALUE18),
i => Res(i),
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == PC8_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == PC8_A::VALUE2
}
#[doc = "Checks if the value of the field is `VALUE3`"]
#[inline(always)]
pub fn is_value3(&self) -> bool {
*self == PC8_A::VALUE3
}
#[doc = "Checks if the value of the field is `VALUE4`"]
#[inline(always)]
pub fn is_value4(&self) -> bool {
*self == PC8_A::VALUE4
}
#[doc = "Checks if the value of the field is `VALUE5`"]
#[inline(always)]
pub fn is_value5(&self) -> bool {
*self == PC8_A::VALUE5
}
#[doc = "Checks if the value of the field is `VALUE6`"]
#[inline(always)]
pub fn is_value6(&self) -> bool {
*self == PC8_A::VALUE6
}
#[doc = "Checks if the value of the field is `VALUE7`"]
#[inline(always)]
pub fn is_value7(&self) -> bool {
*self == PC8_A::VALUE7
}
#[doc = "Checks if the value of the field is `VALUE8`"]
#[inline(always)]
pub fn is_value8(&self) -> bool {
*self == PC8_A::VALUE8
}
#[doc = "Checks if the value of the field is `VALUE9`"]
#[inline(always)]
pub fn is_value9(&self) -> bool {
*self == PC8_A::VALUE9
}
#[doc = "Checks if the value of the field is `VALUE10`"]
#[inline(always)]
pub fn is_value10(&self) -> bool {
*self == PC8_A::VALUE10
}
#[doc = "Checks if the value of the field is `VALUE11`"]
#[inline(always)]
pub fn is_value11(&self) -> bool {
*self == PC8_A::VALUE11
}
#[doc = "Checks if the value of the field is `VALUE12`"]
#[inline(always)]
pub fn is_value12(&self) -> bool {
*self == PC8_A::VALUE12
}
#[doc = "Checks if the value of the field is `VALUE13`"]
#[inline(always)]
pub fn is_value13(&self) -> bool {
*self == PC8_A::VALUE13
}
#[doc = "Checks if the value of the field is `VALUE14`"]
#[inline(always)]
pub fn is_value14(&self) -> bool {
*self == PC8_A::VALUE14
}
#[doc = "Checks if the value of the field is `VALUE15`"]
#[inline(always)]
pub fn is_value15(&self) -> bool {
*self == PC8_A::VALUE15
}
#[doc = "Checks if the value of the field is `VALUE16`"]
#[inline(always)]
pub fn is_value16(&self) -> bool {
*self == PC8_A::VALUE16
}
#[doc = "Checks if the value of the field is `VALUE17`"]
#[inline(always)]
pub fn is_value17(&self) -> bool {
*self == PC8_A::VALUE17
}
#[doc = "Checks if the value of the field is `VALUE18`"]
#[inline(always)]
pub fn is_value18(&self) -> bool {
*self == PC8_A::VALUE18
}
}
#[doc = "Write proxy for field `PC8`"]
pub struct PC8_W<'a> {
w: &'a mut W,
}
impl<'a> PC8_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: PC8_A) -> &'a mut W {
unsafe { self.bits(variant.into()) }
}
#[doc = "Input - No internal pull device active"]
#[inline(always)]
pub fn value1(self) -> &'a mut W {
self.variant(PC8_A::VALUE1)
}
#[doc = "Input - Internal pull-down device active"]
#[inline(always)]
pub fn value2(self) -> &'a mut W {
self.variant(PC8_A::VALUE2)
}
#[doc = "Input - Internal pull-up device active"]
#[inline(always)]
pub fn value3(self) -> &'a mut W {
self.variant(PC8_A::VALUE3)
}
#[doc = "Input - No internal pull device, Pn_OUTx = input value"]
#[inline(always)]
pub fn value4(self) -> &'a mut W {
self.variant(PC8_A::VALUE4)
}
#[doc = "Input inverted - No internal pull device active"]
#[inline(always)]
pub fn value5(self) -> &'a mut W {
self.variant(PC8_A::VALUE5)
}
#[doc = "Input inverted - Internal pull-down device active"]
#[inline(always)]
pub fn value6(self) -> &'a mut W {
self.variant(PC8_A::VALUE6)
}
#[doc = "Input inverted - Internal pull-up device active"]
#[inline(always)]
pub fn value7(self) -> &'a mut W {
self.variant(PC8_A::VALUE7)
}
#[doc = "Input inverted - No internal pull device, Pn_OUTx = input value"]
#[inline(always)]
pub fn value8(self) -> &'a mut W {
self.variant(PC8_A::VALUE8)
}
#[doc = "Output Push-Pull - General-purpose output"]
#[inline(always)]
pub fn value9(self) -> &'a mut W {
self.variant(PC8_A::VALUE9)
}
#[doc = "Output Push-Pull - Alternate output function 1"]
#[inline(always)]
pub fn value10(self) -> &'a mut W {
self.variant(PC8_A::VALUE10)
}
#[doc = "Output Push-Pull - Alternate output function 2"]
#[inline(always)]
pub fn value11(self) -> &'a mut W {
self.variant(PC8_A::VALUE11)
}
#[doc = "Output Push-Pull - Alternate output function 3"]
#[inline(always)]
pub fn value12(self) -> &'a mut W {
self.variant(PC8_A::VALUE12)
}
#[doc = "Output Push-Pull - Alternate output function 4"]
#[inline(always)]
pub fn value13(self) -> &'a mut W {
self.variant(PC8_A::VALUE13)
}
#[doc = "Output Open Drain - General-purpose output"]
#[inline(always)]
pub fn value14(self) -> &'a mut W {
self.variant(PC8_A::VALUE14)
}
#[doc = "Output Open Drain - Alternate output function 1"]
#[inline(always)]
pub fn value15(self) -> &'a mut W {
self.variant(PC8_A::VALUE15)
}
#[doc = "Output Open Drain - Alternate output function 2"]
#[inline(always)]
pub fn value16(self) -> &'a mut W {
self.variant(PC8_A::VALUE16)
}
#[doc = "Output Open Drain - Alternate output function 3"]
#[inline(always)]
pub fn value17(self) -> &'a mut W {
self.variant(PC8_A::VALUE17)
}
#[doc = "Output Open Drain - Alternate output function 4"]
#[inline(always)]
pub fn value18(self) -> &'a mut W {
self.variant(PC8_A::VALUE18)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x1f << 3)) | (((value as u32) & 0x1f) << 3);
self.w
}
}
#[doc = "Port Control for Port n Pin 8 to 11\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum PC9_A {
#[doc = "0: Input - No internal pull device active"]
VALUE1,
#[doc = "1: Input - Internal pull-down device active"]
VALUE2,
#[doc = "2: Input - Internal pull-up device active"]
VALUE3,
#[doc = "3: Input - No internal pull device, Pn_OUTx = input value"]
VALUE4,
#[doc = "4: Input inverted - No internal pull device active"]
VALUE5,
#[doc = "5: Input inverted - Internal pull-down device active"]
VALUE6,
#[doc = "6: Input inverted - Internal pull-up device active"]
VALUE7,
#[doc = "7: Input inverted - No internal pull device, Pn_OUTx = input value"]
VALUE8,
#[doc = "16: Output Push-Pull - General-purpose output"]
VALUE9,
#[doc = "17: Output Push-Pull - Alternate output function 1"]
VALUE10,
#[doc = "18: Output Push-Pull - Alternate output function 2"]
VALUE11,
#[doc = "19: Output Push-Pull - Alternate output function 3"]
VALUE12,
#[doc = "20: Output Push-Pull - Alternate output function 4"]
VALUE13,
#[doc = "24: Output Open Drain - General-purpose output"]
VALUE14,
#[doc = "25: Output Open Drain - Alternate output function 1"]
VALUE15,
#[doc = "26: Output Open Drain - Alternate output function 2"]
VALUE16,
#[doc = "27: Output Open Drain - Alternate output function 3"]
VALUE17,
#[doc = "28: Output Open Drain - Alternate output function 4"]
VALUE18,
}
impl From<PC9_A> for u8 {
#[inline(always)]
fn from(variant: PC9_A) -> Self {
match variant {
PC9_A::VALUE1 => 0,
PC9_A::VALUE2 => 1,
PC9_A::VALUE3 => 2,
PC9_A::VALUE4 => 3,
PC9_A::VALUE5 => 4,
PC9_A::VALUE6 => 5,
PC9_A::VALUE7 => 6,
PC9_A::VALUE8 => 7,
PC9_A::VALUE9 => 16,
PC9_A::VALUE10 => 17,
PC9_A::VALUE11 => 18,
PC9_A::VALUE12 => 19,
PC9_A::VALUE13 => 20,
PC9_A::VALUE14 => 24,
PC9_A::VALUE15 => 25,
PC9_A::VALUE16 => 26,
PC9_A::VALUE17 => 27,
PC9_A::VALUE18 => 28,
}
}
}
#[doc = "Reader of field `PC9`"]
pub type PC9_R = crate::R<u8, PC9_A>;
impl PC9_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> crate::Variant<u8, PC9_A> {
use crate::Variant::*;
match self.bits {
0 => Val(PC9_A::VALUE1),
1 => Val(PC9_A::VALUE2),
2 => Val(PC9_A::VALUE3),
3 => Val(PC9_A::VALUE4),
4 => Val(PC9_A::VALUE5),
5 => Val(PC9_A::VALUE6),
6 => Val(PC9_A::VALUE7),
7 => Val(PC9_A::VALUE8),
16 => Val(PC9_A::VALUE9),
17 => Val(PC9_A::VALUE10),
18 => Val(PC9_A::VALUE11),
19 => Val(PC9_A::VALUE12),
20 => Val(PC9_A::VALUE13),
24 => Val(PC9_A::VALUE14),
25 => Val(PC9_A::VALUE15),
26 => Val(PC9_A::VALUE16),
27 => Val(PC9_A::VALUE17),
28 => Val(PC9_A::VALUE18),
i => Res(i),
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == PC9_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == PC9_A::VALUE2
}
#[doc = "Checks if the value of the field is `VALUE3`"]
#[inline(always)]
pub fn is_value3(&self) -> bool {
*self == PC9_A::VALUE3
}
#[doc = "Checks if the value of the field is `VALUE4`"]
#[inline(always)]
pub fn is_value4(&self) -> bool {
*self == PC9_A::VALUE4
}
#[doc = "Checks if the value of the field is `VALUE5`"]
#[inline(always)]
pub fn is_value5(&self) -> bool {
*self == PC9_A::VALUE5
}
#[doc = "Checks if the value of the field is `VALUE6`"]
#[inline(always)]
pub fn is_value6(&self) -> bool {
*self == PC9_A::VALUE6
}
#[doc = "Checks if the value of the field is `VALUE7`"]
#[inline(always)]
pub fn is_value7(&self) -> bool {
*self == PC9_A::VALUE7
}
#[doc = "Checks if the value of the field is `VALUE8`"]
#[inline(always)]
pub fn is_value8(&self) -> bool {
*self == PC9_A::VALUE8
}
#[doc = "Checks if the value of the field is `VALUE9`"]
#[inline(always)]
pub fn is_value9(&self) -> bool {
*self == PC9_A::VALUE9
}
#[doc = "Checks if the value of the field is `VALUE10`"]
#[inline(always)]
pub fn is_value10(&self) -> bool {
*self == PC9_A::VALUE10
}
#[doc = "Checks if the value of the field is `VALUE11`"]
#[inline(always)]
pub fn is_value11(&self) -> bool {
*self == PC9_A::VALUE11
}
#[doc = "Checks if the value of the field is `VALUE12`"]
#[inline(always)]
pub fn is_value12(&self) -> bool {
*self == PC9_A::VALUE12
}
#[doc = "Checks if the value of the field is `VALUE13`"]
#[inline(always)]
pub fn is_value13(&self) -> bool {
*self == PC9_A::VALUE13
}
#[doc = "Checks if the value of the field is `VALUE14`"]
#[inline(always)]
pub fn is_value14(&self) -> bool {
*self == PC9_A::VALUE14
}
#[doc = "Checks if the value of the field is `VALUE15`"]
#[inline(always)]
pub fn is_value15(&self) -> bool {
*self == PC9_A::VALUE15
}
#[doc = "Checks if the value of the field is `VALUE16`"]
#[inline(always)]
pub fn is_value16(&self) -> bool {
*self == PC9_A::VALUE16
}
#[doc = "Checks if the value of the field is `VALUE17`"]
#[inline(always)]
pub fn is_value17(&self) -> bool {
*self == PC9_A::VALUE17
}
#[doc = "Checks if the value of the field is `VALUE18`"]
#[inline(always)]
pub fn is_value18(&self) -> bool {
*self == PC9_A::VALUE18
}
}
#[doc = "Write proxy for field `PC9`"]
pub struct PC9_W<'a> {
w: &'a mut W,
}
impl<'a> PC9_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: PC9_A) -> &'a mut W {
unsafe { self.bits(variant.into()) }
}
#[doc = "Input - No internal pull device active"]
#[inline(always)]
pub fn value1(self) -> &'a mut W {
self.variant(PC9_A::VALUE1)
}
#[doc = "Input - Internal pull-down device active"]
#[inline(always)]
pub fn value2(self) -> &'a mut W {
self.variant(PC9_A::VALUE2)
}
#[doc = "Input - Internal pull-up device active"]
#[inline(always)]
pub fn value3(self) -> &'a mut W {
self.variant(PC9_A::VALUE3)
}
#[doc = "Input - No internal pull device, Pn_OUTx = input value"]
#[inline(always)]
pub fn value4(self) -> &'a mut W {
self.variant(PC9_A::VALUE4)
}
#[doc = "Input inverted - No internal pull device active"]
#[inline(always)]
pub fn value5(self) -> &'a mut W {
self.variant(PC9_A::VALUE5)
}
#[doc = "Input inverted - Internal pull-down device active"]
#[inline(always)]
pub fn value6(self) -> &'a mut W {
self.variant(PC9_A::VALUE6)
}
#[doc = "Input inverted - Internal pull-up device active"]
#[inline(always)]
pub fn value7(self) -> &'a mut W {
self.variant(PC9_A::VALUE7)
}
#[doc = "Input inverted - No internal pull device, Pn_OUTx = input value"]
#[inline(always)]
pub fn value8(self) -> &'a mut W {
self.variant(PC9_A::VALUE8)
}
#[doc = "Output Push-Pull - General-purpose output"]
#[inline(always)]
pub fn value9(self) -> &'a mut W {
self.variant(PC9_A::VALUE9)
}
#[doc = "Output Push-Pull - Alternate output function 1"]
#[inline(always)]
pub fn value10(self) -> &'a mut W {
self.variant(PC9_A::VALUE10)
}
#[doc = "Output Push-Pull - Alternate output function 2"]
#[inline(always)]
pub fn value11(self) -> &'a mut W {
self.variant(PC9_A::VALUE11)
}
#[doc = "Output Push-Pull - Alternate output function 3"]
#[inline(always)]
pub fn value12(self) -> &'a mut W {
self.variant(PC9_A::VALUE12)
}
#[doc = "Output Push-Pull - Alternate output function 4"]
#[inline(always)]
pub fn value13(self) -> &'a mut W {
self.variant(PC9_A::VALUE13)
}
#[doc = "Output Open Drain - General-purpose output"]
#[inline(always)]
pub fn value14(self) -> &'a mut W {
self.variant(PC9_A::VALUE14)
}
#[doc = "Output Open Drain - Alternate output function 1"]
#[inline(always)]
pub fn value15(self) -> &'a mut W {
self.variant(PC9_A::VALUE15)
}
#[doc = "Output Open Drain - Alternate output function 2"]
#[inline(always)]
pub fn value16(self) -> &'a mut W {
self.variant(PC9_A::VALUE16)
}
#[doc = "Output Open Drain - Alternate output function 3"]
#[inline(always)]
pub fn value17(self) -> &'a mut W {
self.variant(PC9_A::VALUE17)
}
#[doc = "Output Open Drain - Alternate output function 4"]
#[inline(always)]
pub fn value18(self) -> &'a mut W {
self.variant(PC9_A::VALUE18)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x1f << 11)) | (((value as u32) & 0x1f) << 11);
self.w
}
}
#[doc = "Port Control for Port n Pin 8 to 11\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum PC10_A {
#[doc = "0: Input - No internal pull device active"]
VALUE1,
#[doc = "1: Input - Internal pull-down device active"]
VALUE2,
#[doc = "2: Input - Internal pull-up device active"]
VALUE3,
#[doc = "3: Input - No internal pull device, Pn_OUTx = input value"]
VALUE4,
#[doc = "4: Input inverted - No internal pull device active"]
VALUE5,
#[doc = "5: Input inverted - Internal pull-down device active"]
VALUE6,
#[doc = "6: Input inverted - Internal pull-up device active"]
VALUE7,
#[doc = "7: Input inverted - No internal pull device, Pn_OUTx = input value"]
VALUE8,
#[doc = "16: Output Push-Pull - General-purpose output"]
VALUE9,
#[doc = "17: Output Push-Pull - Alternate output function 1"]
VALUE10,
#[doc = "18: Output Push-Pull - Alternate output function 2"]
VALUE11,
#[doc = "19: Output Push-Pull - Alternate output function 3"]
VALUE12,
#[doc = "20: Output Push-Pull - Alternate output function 4"]
VALUE13,
#[doc = "24: Output Open Drain - General-purpose output"]
VALUE14,
#[doc = "25: Output Open Drain - Alternate output function 1"]
VALUE15,
#[doc = "26: Output Open Drain - Alternate output function 2"]
VALUE16,
#[doc = "27: Output Open Drain - Alternate output function 3"]
VALUE17,
#[doc = "28: Output Open Drain - Alternate output function 4"]
VALUE18,
}
impl From<PC10_A> for u8 {
#[inline(always)]
fn from(variant: PC10_A) -> Self {
match variant {
PC10_A::VALUE1 => 0,
PC10_A::VALUE2 => 1,
PC10_A::VALUE3 => 2,
PC10_A::VALUE4 => 3,
PC10_A::VALUE5 => 4,
PC10_A::VALUE6 => 5,
PC10_A::VALUE7 => 6,
PC10_A::VALUE8 => 7,
PC10_A::VALUE9 => 16,
PC10_A::VALUE10 => 17,
PC10_A::VALUE11 => 18,
PC10_A::VALUE12 => 19,
PC10_A::VALUE13 => 20,
PC10_A::VALUE14 => 24,
PC10_A::VALUE15 => 25,
PC10_A::VALUE16 => 26,
PC10_A::VALUE17 => 27,
PC10_A::VALUE18 => 28,
}
}
}
#[doc = "Reader of field `PC10`"]
pub type PC10_R = crate::R<u8, PC10_A>;
impl PC10_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> crate::Variant<u8, PC10_A> {
use crate::Variant::*;
match self.bits {
0 => Val(PC10_A::VALUE1),
1 => Val(PC10_A::VALUE2),
2 => Val(PC10_A::VALUE3),
3 => Val(PC10_A::VALUE4),
4 => Val(PC10_A::VALUE5),
5 => Val(PC10_A::VALUE6),
6 => Val(PC10_A::VALUE7),
7 => Val(PC10_A::VALUE8),
16 => Val(PC10_A::VALUE9),
17 => Val(PC10_A::VALUE10),
18 => Val(PC10_A::VALUE11),
19 => Val(PC10_A::VALUE12),
20 => Val(PC10_A::VALUE13),
24 => Val(PC10_A::VALUE14),
25 => Val(PC10_A::VALUE15),
26 => Val(PC10_A::VALUE16),
27 => Val(PC10_A::VALUE17),
28 => Val(PC10_A::VALUE18),
i => Res(i),
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == PC10_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == PC10_A::VALUE2
}
#[doc = "Checks if the value of the field is `VALUE3`"]
#[inline(always)]
pub fn is_value3(&self) -> bool {
*self == PC10_A::VALUE3
}
#[doc = "Checks if the value of the field is `VALUE4`"]
#[inline(always)]
pub fn is_value4(&self) -> bool {
*self == PC10_A::VALUE4
}
#[doc = "Checks if the value of the field is `VALUE5`"]
#[inline(always)]
pub fn is_value5(&self) -> bool {
*self == PC10_A::VALUE5
}
#[doc = "Checks if the value of the field is `VALUE6`"]
#[inline(always)]
pub fn is_value6(&self) -> bool {
*self == PC10_A::VALUE6
}
#[doc = "Checks if the value of the field is `VALUE7`"]
#[inline(always)]
pub fn is_value7(&self) -> bool {
*self == PC10_A::VALUE7
}
#[doc = "Checks if the value of the field is `VALUE8`"]
#[inline(always)]
pub fn is_value8(&self) -> bool {
*self == PC10_A::VALUE8
}
#[doc = "Checks if the value of the field is `VALUE9`"]
#[inline(always)]
pub fn is_value9(&self) -> bool {
*self == PC10_A::VALUE9
}
#[doc = "Checks if the value of the field is `VALUE10`"]
#[inline(always)]
pub fn is_value10(&self) -> bool {
*self == PC10_A::VALUE10
}
#[doc = "Checks if the value of the field is `VALUE11`"]
#[inline(always)]
pub fn is_value11(&self) -> bool {
*self == PC10_A::VALUE11
}
#[doc = "Checks if the value of the field is `VALUE12`"]
#[inline(always)]
pub fn is_value12(&self) -> bool {
*self == PC10_A::VALUE12
}
#[doc = "Checks if the value of the field is `VALUE13`"]
#[inline(always)]
pub fn is_value13(&self) -> bool {
*self == PC10_A::VALUE13
}
#[doc = "Checks if the value of the field is `VALUE14`"]
#[inline(always)]
pub fn is_value14(&self) -> bool {
*self == PC10_A::VALUE14
}
#[doc = "Checks if the value of the field is `VALUE15`"]
#[inline(always)]
pub fn is_value15(&self) -> bool {
*self == PC10_A::VALUE15
}
#[doc = "Checks if the value of the field is `VALUE16`"]
#[inline(always)]
pub fn is_value16(&self) -> bool {
*self == PC10_A::VALUE16
}
#[doc = "Checks if the value of the field is `VALUE17`"]
#[inline(always)]
pub fn is_value17(&self) -> bool {
*self == PC10_A::VALUE17
}
#[doc = "Checks if the value of the field is `VALUE18`"]
#[inline(always)]
pub fn is_value18(&self) -> bool {
*self == PC10_A::VALUE18
}
}
#[doc = "Write proxy for field `PC10`"]
pub struct PC10_W<'a> {
w: &'a mut W,
}
impl<'a> PC10_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: PC10_A) -> &'a mut W {
unsafe { self.bits(variant.into()) }
}
#[doc = "Input - No internal pull device active"]
#[inline(always)]
pub fn value1(self) -> &'a mut W {
self.variant(PC10_A::VALUE1)
}
#[doc = "Input - Internal pull-down device active"]
#[inline(always)]
pub fn value2(self) -> &'a mut W {
self.variant(PC10_A::VALUE2)
}
#[doc = "Input - Internal pull-up device active"]
#[inline(always)]
pub fn value3(self) -> &'a mut W {
self.variant(PC10_A::VALUE3)
}
#[doc = "Input - No internal pull device, Pn_OUTx = input value"]
#[inline(always)]
pub fn value4(self) -> &'a mut W {
self.variant(PC10_A::VALUE4)
}
#[doc = "Input inverted - No internal pull device active"]
#[inline(always)]
pub fn value5(self) -> &'a mut W {
self.variant(PC10_A::VALUE5)
}
#[doc = "Input inverted - Internal pull-down device active"]
#[inline(always)]
pub fn value6(self) -> &'a mut W {
self.variant(PC10_A::VALUE6)
}
#[doc = "Input inverted - Internal pull-up device active"]
#[inline(always)]
pub fn value7(self) -> &'a mut W {
self.variant(PC10_A::VALUE7)
}
#[doc = "Input inverted - No internal pull device, Pn_OUTx = input value"]
#[inline(always)]
pub fn value8(self) -> &'a mut W {
self.variant(PC10_A::VALUE8)
}
#[doc = "Output Push-Pull - General-purpose output"]
#[inline(always)]
pub fn value9(self) -> &'a mut W {
self.variant(PC10_A::VALUE9)
}
#[doc = "Output Push-Pull - Alternate output function 1"]
#[inline(always)]
pub fn value10(self) -> &'a mut W {
self.variant(PC10_A::VALUE10)
}
#[doc = "Output Push-Pull - Alternate output function 2"]
#[inline(always)]
pub fn value11(self) -> &'a mut W {
self.variant(PC10_A::VALUE11)
}
#[doc = "Output Push-Pull - Alternate output function 3"]
#[inline(always)]
pub fn value12(self) -> &'a mut W {
self.variant(PC10_A::VALUE12)
}
#[doc = "Output Push-Pull - Alternate output function 4"]
#[inline(always)]
pub fn value13(self) -> &'a mut W {
self.variant(PC10_A::VALUE13)
}
#[doc = "Output Open Drain - General-purpose output"]
#[inline(always)]
pub fn value14(self) -> &'a mut W {
self.variant(PC10_A::VALUE14)
}
#[doc = "Output Open Drain - Alternate output function 1"]
#[inline(always)]
pub fn value15(self) -> &'a mut W {
self.variant(PC10_A::VALUE15)
}
#[doc = "Output Open Drain - Alternate output function 2"]
#[inline(always)]
pub fn value16(self) -> &'a mut W {
self.variant(PC10_A::VALUE16)
}
#[doc = "Output Open Drain - Alternate output function 3"]
#[inline(always)]
pub fn value17(self) -> &'a mut W {
self.variant(PC10_A::VALUE17)
}
#[doc = "Output Open Drain - Alternate output function 4"]
#[inline(always)]
pub fn value18(self) -> &'a mut W {
self.variant(PC10_A::VALUE18)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x1f << 19)) | (((value as u32) & 0x1f) << 19);
self.w
}
}
#[doc = "Port Control for Port n Pin 8 to 11\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum PC11_A {
#[doc = "0: Input - No internal pull device active"]
VALUE1,
#[doc = "1: Input - Internal pull-down device active"]
VALUE2,
#[doc = "2: Input - Internal pull-up device active"]
VALUE3,
#[doc = "3: Input - No internal pull device, Pn_OUTx = input value"]
VALUE4,
#[doc = "4: Input inverted - No internal pull device active"]
VALUE5,
#[doc = "5: Input inverted - Internal pull-down device active"]
VALUE6,
#[doc = "6: Input inverted - Internal pull-up device active"]
VALUE7,
#[doc = "7: Input inverted - No internal pull device, Pn_OUTx = input value"]
VALUE8,
#[doc = "16: Output Push-Pull - General-purpose output"]
VALUE9,
#[doc = "17: Output Push-Pull - Alternate output function 1"]
VALUE10,
#[doc = "18: Output Push-Pull - Alternate output function 2"]
VALUE11,
#[doc = "19: Output Push-Pull - Alternate output function 3"]
VALUE12,
#[doc = "20: Output Push-Pull - Alternate output function 4"]
VALUE13,
#[doc = "24: Output Open Drain - General-purpose output"]
VALUE14,
#[doc = "25: Output Open Drain - Alternate output function 1"]
VALUE15,
#[doc = "26: Output Open Drain - Alternate output function 2"]
VALUE16,
#[doc = "27: Output Open Drain - Alternate output function 3"]
VALUE17,
#[doc = "28: Output Open Drain - Alternate output function 4"]
VALUE18,
}
impl From<PC11_A> for u8 {
#[inline(always)]
fn from(variant: PC11_A) -> Self {
match variant {
PC11_A::VALUE1 => 0,
PC11_A::VALUE2 => 1,
PC11_A::VALUE3 => 2,
PC11_A::VALUE4 => 3,
PC11_A::VALUE5 => 4,
PC11_A::VALUE6 => 5,
PC11_A::VALUE7 => 6,
PC11_A::VALUE8 => 7,
PC11_A::VALUE9 => 16,
PC11_A::VALUE10 => 17,
PC11_A::VALUE11 => 18,
PC11_A::VALUE12 => 19,
PC11_A::VALUE13 => 20,
PC11_A::VALUE14 => 24,
PC11_A::VALUE15 => 25,
PC11_A::VALUE16 => 26,
PC11_A::VALUE17 => 27,
PC11_A::VALUE18 => 28,
}
}
}
#[doc = "Reader of field `PC11`"]
pub type PC11_R = crate::R<u8, PC11_A>;
impl PC11_R {
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> crate::Variant<u8, PC11_A> {
use crate::Variant::*;
match self.bits {
0 => Val(PC11_A::VALUE1),
1 => Val(PC11_A::VALUE2),
2 => Val(PC11_A::VALUE3),
3 => Val(PC11_A::VALUE4),
4 => Val(PC11_A::VALUE5),
5 => Val(PC11_A::VALUE6),
6 => Val(PC11_A::VALUE7),
7 => Val(PC11_A::VALUE8),
16 => Val(PC11_A::VALUE9),
17 => Val(PC11_A::VALUE10),
18 => Val(PC11_A::VALUE11),
19 => Val(PC11_A::VALUE12),
20 => Val(PC11_A::VALUE13),
24 => Val(PC11_A::VALUE14),
25 => Val(PC11_A::VALUE15),
26 => Val(PC11_A::VALUE16),
27 => Val(PC11_A::VALUE17),
28 => Val(PC11_A::VALUE18),
i => Res(i),
}
}
#[doc = "Checks if the value of the field is `VALUE1`"]
#[inline(always)]
pub fn is_value1(&self) -> bool {
*self == PC11_A::VALUE1
}
#[doc = "Checks if the value of the field is `VALUE2`"]
#[inline(always)]
pub fn is_value2(&self) -> bool {
*self == PC11_A::VALUE2
}
#[doc = "Checks if the value of the field is `VALUE3`"]
#[inline(always)]
pub fn is_value3(&self) -> bool {
*self == PC11_A::VALUE3
}
#[doc = "Checks if the value of the field is `VALUE4`"]
#[inline(always)]
pub fn is_value4(&self) -> bool {
*self == PC11_A::VALUE4
}
#[doc = "Checks if the value of the field is `VALUE5`"]
#[inline(always)]
pub fn is_value5(&self) -> bool {
*self == PC11_A::VALUE5
}
#[doc = "Checks if the value of the field is `VALUE6`"]
#[inline(always)]
pub fn is_value6(&self) -> bool {
*self == PC11_A::VALUE6
}
#[doc = "Checks if the value of the field is `VALUE7`"]
#[inline(always)]
pub fn is_value7(&self) -> bool {
*self == PC11_A::VALUE7
}
#[doc = "Checks if the value of the field is `VALUE8`"]
#[inline(always)]
pub fn is_value8(&self) -> bool {
*self == PC11_A::VALUE8
}
#[doc = "Checks if the value of the field is `VALUE9`"]
#[inline(always)]
pub fn is_value9(&self) -> bool {
*self == PC11_A::VALUE9
}
#[doc = "Checks if the value of the field is `VALUE10`"]
#[inline(always)]
pub fn is_value10(&self) -> bool {
*self == PC11_A::VALUE10
}
#[doc = "Checks if the value of the field is `VALUE11`"]
#[inline(always)]
pub fn is_value11(&self) -> bool {
*self == PC11_A::VALUE11
}
#[doc = "Checks if the value of the field is `VALUE12`"]
#[inline(always)]
pub fn is_value12(&self) -> bool {
*self == PC11_A::VALUE12
}
#[doc = "Checks if the value of the field is `VALUE13`"]
#[inline(always)]
pub fn is_value13(&self) -> bool {
*self == PC11_A::VALUE13
}
#[doc = "Checks if the value of the field is `VALUE14`"]
#[inline(always)]
pub fn is_value14(&self) -> bool {
*self == PC11_A::VALUE14
}
#[doc = "Checks if the value of the field is `VALUE15`"]
#[inline(always)]
pub fn is_value15(&self) -> bool {
*self == PC11_A::VALUE15
}
#[doc = "Checks if the value of the field is `VALUE16`"]
#[inline(always)]
pub fn is_value16(&self) -> bool {
*self == PC11_A::VALUE16
}
#[doc = "Checks if the value of the field is `VALUE17`"]
#[inline(always)]
pub fn is_value17(&self) -> bool {
*self == PC11_A::VALUE17
}
#[doc = "Checks if the value of the field is `VALUE18`"]
#[inline(always)]
pub fn is_value18(&self) -> bool {
*self == PC11_A::VALUE18
}
}
#[doc = "Write proxy for field `PC11`"]
pub struct PC11_W<'a> {
w: &'a mut W,
}
impl<'a> PC11_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: PC11_A) -> &'a mut W {
unsafe { self.bits(variant.into()) }
}
#[doc = "Input - No internal pull device active"]
#[inline(always)]
pub fn value1(self) -> &'a mut W {
self.variant(PC11_A::VALUE1)
}
#[doc = "Input - Internal pull-down device active"]
#[inline(always)]
pub fn value2(self) -> &'a mut W {
self.variant(PC11_A::VALUE2)
}
#[doc = "Input - Internal pull-up device active"]
#[inline(always)]
pub fn value3(self) -> &'a mut W {
self.variant(PC11_A::VALUE3)
}
#[doc = "Input - No internal pull device, Pn_OUTx = input value"]
#[inline(always)]
pub fn value4(self) -> &'a mut W {
self.variant(PC11_A::VALUE4)
}
#[doc = "Input inverted - No internal pull device active"]
#[inline(always)]
pub fn value5(self) -> &'a mut W {
self.variant(PC11_A::VALUE5)
}
#[doc = "Input inverted - Internal pull-down device active"]
#[inline(always)]
pub fn value6(self) -> &'a mut W {
self.variant(PC11_A::VALUE6)
}
#[doc = "Input inverted - Internal pull-up device active"]
#[inline(always)]
pub fn value7(self) -> &'a mut W {
self.variant(PC11_A::VALUE7)
}
#[doc = "Input inverted - No internal pull device, Pn_OUTx = input value"]
#[inline(always)]
pub fn value8(self) -> &'a mut W {
self.variant(PC11_A::VALUE8)
}
#[doc = "Output Push-Pull - General-purpose output"]
#[inline(always)]
pub fn value9(self) -> &'a mut W {
self.variant(PC11_A::VALUE9)
}
#[doc = "Output Push-Pull - Alternate output function 1"]
#[inline(always)]
pub fn value10(self) -> &'a mut W {
self.variant(PC11_A::VALUE10)
}
#[doc = "Output Push-Pull - Alternate output function 2"]
#[inline(always)]
pub fn value11(self) -> &'a mut W {
self.variant(PC11_A::VALUE11)
}
#[doc = "Output Push-Pull - Alternate output function 3"]
#[inline(always)]
pub fn value12(self) -> &'a mut W {
self.variant(PC11_A::VALUE12)
}
#[doc = "Output Push-Pull - Alternate output function 4"]
#[inline(always)]
pub fn value13(self) -> &'a mut W {
self.variant(PC11_A::VALUE13)
}
#[doc = "Output Open Drain - General-purpose output"]
#[inline(always)]
pub fn value14(self) -> &'a mut W {
self.variant(PC11_A::VALUE14)
}
#[doc = "Output Open Drain - Alternate output function 1"]
#[inline(always)]
pub fn value15(self) -> &'a mut W {
self.variant(PC11_A::VALUE15)
}
#[doc = "Output Open Drain - Alternate output function 2"]
#[inline(always)]
pub fn value16(self) -> &'a mut W {
self.variant(PC11_A::VALUE16)
}
#[doc = "Output Open Drain - Alternate output function 3"]
#[inline(always)]
pub fn value17(self) -> &'a mut W {
self.variant(PC11_A::VALUE17)
}
#[doc = "Output Open Drain - Alternate output function 4"]
#[inline(always)]
pub fn value18(self) -> &'a mut W {
self.variant(PC11_A::VALUE18)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x1f << 27)) | (((value as u32) & 0x1f) << 27);
self.w
}
}
impl R {
#[doc = "Bits 3:7 - Port Control for Port n Pin 8 to 11"]
#[inline(always)]
pub fn pc8(&self) -> PC8_R {
PC8_R::new(((self.bits >> 3) & 0x1f) as u8)
}
#[doc = "Bits 11:15 - Port Control for Port n Pin 8 to 11"]
#[inline(always)]
pub fn pc9(&self) -> PC9_R {
PC9_R::new(((self.bits >> 11) & 0x1f) as u8)
}
#[doc = "Bits 19:23 - Port Control for Port n Pin 8 to 11"]
#[inline(always)]
pub fn pc10(&self) -> PC10_R {
PC10_R::new(((self.bits >> 19) & 0x1f) as u8)
}
#[doc = "Bits 27:31 - Port Control for Port n Pin 8 to 11"]
#[inline(always)]
pub fn pc11(&self) -> PC11_R {
PC11_R::new(((self.bits >> 27) & 0x1f) as u8)
}
}
impl W {
#[doc = "Bits 3:7 - Port Control for Port n Pin 8 to 11"]
#[inline(always)]
pub fn pc8(&mut self) -> PC8_W {
PC8_W { w: self }
}
#[doc = "Bits 11:15 - Port Control for Port n Pin 8 to 11"]
#[inline(always)]
pub fn pc9(&mut self) -> PC9_W {
PC9_W { w: self }
}
#[doc = "Bits 19:23 - Port Control for Port n Pin 8 to 11"]
#[inline(always)]
pub fn pc10(&mut self) -> PC10_W {
PC10_W { w: self }
}
#[doc = "Bits 27:31 - Port Control for Port n Pin 8 to 11"]
#[inline(always)]
pub fn pc11(&mut self) -> PC11_W {
PC11_W { w: self }
}
}