pub struct PageFaultErrorCode(/* private fields */);
Expand description

Describes an page fault error code.

This structure is defined by the following manual sections:

  • AMD Volume 2: 8.4.2
  • Intel Volume 3A: 4.7

Implementations§

source§

impl PageFaultErrorCode

source

pub const PROTECTION_VIOLATION: Self = _

If this flag is set, the page fault was caused by a page-protection violation, else the page fault was caused by a not-present page.

source

pub const CAUSED_BY_WRITE: Self = _

If this flag is set, the memory access that caused the page fault was a write. Else the access that caused the page fault is a memory read. This bit does not necessarily indicate the cause of the page fault was a read or write violation.

source

pub const USER_MODE: Self = _

If this flag is set, an access in user mode (CPL=3) caused the page fault. Else an access in supervisor mode (CPL=0, 1, or 2) caused the page fault. This bit does not necessarily indicate the cause of the page fault was a privilege violation.

source

pub const MALFORMED_TABLE: Self = _

If this flag is set, the page fault is a result of the processor reading a 1 from a reserved field within a page-translation-table entry.

source

pub const INSTRUCTION_FETCH: Self = _

If this flag is set, it indicates that the access that caused the page fault was an instruction fetch.

source

pub const PROTECTION_KEY: Self = _

If this flag is set, it indicates that the page fault was caused by a protection key.

source

pub const SHADOW_STACK: Self = _

If this flag is set, it indicates that the page fault was caused by a shadow stack access.

source

pub const SGX: Self = _

If this flag is set, it indicates that the page fault was caused by SGX access-control requirements (Intel-only).

source

pub const RMP: Self = _

If this flag is set, it indicates that the page fault is a result of the processor encountering an RMP violation (AMD-only).

source§

impl PageFaultErrorCode

source

pub const fn empty() -> Self

Get a flags value with all bits unset.

source

pub const fn all() -> Self

Get a flags value with all known bits set.

source

pub const fn bits(&self) -> u64

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

source

pub const fn from_bits(bits: u64) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

source

pub const fn from_bits_truncate(bits: u64) -> Self

Convert from a bits value, unsetting any unknown bits.

source

pub const fn from_bits_retain(bits: u64) -> Self

Convert from a bits value exactly.

source

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

source

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

source

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

source

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

source

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

source

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

source

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

source

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

source

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

source

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

source

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

source

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

source

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

source

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

source§

impl PageFaultErrorCode

source

pub const fn iter(&self) -> Iter<PageFaultErrorCode>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

source

pub const fn iter_names(&self) -> IterNames<PageFaultErrorCode>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations§

source§

impl Binary for PageFaultErrorCode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl BitAnd for PageFaultErrorCode

source§

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

§

type Output = PageFaultErrorCode

The resulting type after applying the & operator.
source§

impl BitAndAssign for PageFaultErrorCode

source§

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

source§

impl BitOr for PageFaultErrorCode

source§

fn bitor(self, other: PageFaultErrorCode) -> Self

The bitwise or (|) of the bits in two flags values.

§

type Output = PageFaultErrorCode

The resulting type after applying the | operator.
source§

impl BitOrAssign for PageFaultErrorCode

source§

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

source§

impl BitXor for PageFaultErrorCode

source§

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

§

type Output = PageFaultErrorCode

The resulting type after applying the ^ operator.
source§

impl BitXorAssign for PageFaultErrorCode

source§

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

source§

impl Clone for PageFaultErrorCode

source§

fn clone(&self) -> PageFaultErrorCode

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for PageFaultErrorCode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Extend<PageFaultErrorCode> for PageFaultErrorCode

source§

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

source§

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)
Extends a collection with exactly one element.
source§

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)
Reserves capacity in a collection for the given number of additional elements. Read more
source§

impl Flags for PageFaultErrorCode

source§

const FLAGS: &'static [Flag<PageFaultErrorCode>] = _

The set of defined flags.
§

type Bits = u64

The underlying bits type.
source§

fn bits(&self) -> u64

Get the underlying bits value. Read more
source§

fn from_bits_retain(bits: u64) -> PageFaultErrorCode

Convert from a bits value exactly.
source§

fn empty() -> Self

Get a flags value with all bits unset.
source§

fn all() -> Self

Get a flags value with all known bits set.
source§

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value. Read more
source§

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.
source§

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set. Read more
source§

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values. Read more
source§

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values. Read more
source§

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.
source§

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.
source§

fn intersects(&self, other: Self) -> bool
where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.
source§

fn contains(&self, other: Self) -> bool
where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.
source§

fn insert(&mut self, other: Self)
where Self: Sized,

The bitwise or (|) of the bits in two flags values.
source§

fn remove(&mut self, other: Self)
where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!). Read more
source§

fn toggle(&mut self, other: Self)
where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.
source§

fn set(&mut self, other: Self, value: bool)
where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.
source§

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.
source§

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.
source§

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!). Read more
source§

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.
source§

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.
source§

impl FromIterator<PageFaultErrorCode> for PageFaultErrorCode

source§

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

source§

impl Hash for PageFaultErrorCode

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl IntoIterator for PageFaultErrorCode

§

type Item = PageFaultErrorCode

The type of the elements being iterated over.
§

type IntoIter = Iter<PageFaultErrorCode>

Which kind of iterator are we turning this into?
source§

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value. Read more
source§

impl LowerHex for PageFaultErrorCode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Not for PageFaultErrorCode

source§

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

§

type Output = PageFaultErrorCode

The resulting type after applying the ! operator.
source§

impl Octal for PageFaultErrorCode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Ord for PageFaultErrorCode

source§

fn cmp(&self, other: &PageFaultErrorCode) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for PageFaultErrorCode

source§

fn eq(&self, other: &PageFaultErrorCode) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for PageFaultErrorCode

source§

fn partial_cmp(&self, other: &PageFaultErrorCode) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl PublicFlags for PageFaultErrorCode

§

type Primitive = u64

The type of the underlying storage.
§

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.
source§

impl Sub for PageFaultErrorCode

source§

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

§

type Output = PageFaultErrorCode

The resulting type after applying the - operator.
source§

impl SubAssign for PageFaultErrorCode

source§

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

source§

impl UpperHex for PageFaultErrorCode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Copy for PageFaultErrorCode

source§

impl Eq for PageFaultErrorCode

source§

impl StructuralPartialEq for PageFaultErrorCode

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.