[][src]Trait vujio_server::Stream

#[must_use = "streams do nothing unless polled"]pub trait Stream {
    type Item;
    pub fn poll_next(
        self: Pin<&mut Self>,
        cx: &mut Context<'_>
    ) -> Poll<Option<Self::Item>>; pub fn size_hint(&self) -> (usize, Option<usize>) { ... } }

A stream of values produced asynchronously.

If Future<Output = T> is an asynchronous version of T, then Stream<Item = T> is an asynchronous version of Iterator<Item = T>. A stream represents a sequence of value-producing events that occur asynchronously to the caller.

The trait is modeled after Future, but allows poll_next to be called even after a value has been produced, yielding None once the stream has been fully exhausted.

Associated Types

type Item[src]

Values yielded by the stream.

Loading content...

Required methods

pub fn poll_next(
    self: Pin<&mut Self>,
    cx: &mut Context<'_>
) -> Poll<Option<Self::Item>>
[src]

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted.

Return value

There are several possible return values, each indicating a distinct stream state:

  • Poll::Pending means that this stream's next value is not ready yet. Implementations will ensure that the current task will be notified when the next value may be ready.

  • Poll::Ready(Some(val)) means that the stream has successfully produced a value, val, and may produce further values on subsequent poll_next calls.

  • Poll::Ready(None) means that the stream has terminated, and poll_next should not be invoked again.

Panics

Once a stream has finished (returned Ready(None) from poll_next), calling its poll_next method again may panic, block forever, or cause other kinds of problems; the Stream trait places no requirements on the effects of such a call. However, as the poll_next method is not marked unsafe, Rust's usual rules apply: calls must never cause undefined behavior (memory corruption, incorrect use of unsafe functions, or the like), regardless of the stream's state.

If this is difficult to guard against then the fuse adapter can be used to ensure that poll_next always returns Ready(None) in subsequent calls.

Loading content...

Provided methods

pub fn size_hint(&self) -> (usize, Option<usize>)[src]

Returns the bounds on the remaining length of the stream.

Specifically, size_hint() returns a tuple where the first element is the lower bound, and the second element is the upper bound.

The second half of the tuple that is returned is an Option<usize>. A None here means that either there is no known upper bound, or the upper bound is larger than usize.

Implementation notes

It is not enforced that a stream implementation yields the declared number of elements. A buggy stream may yield less than the lower bound or more than the upper bound of elements.

size_hint() is primarily intended to be used for optimizations such as reserving space for the elements of the stream, but must not be trusted to e.g., omit bounds checks in unsafe code. An incorrect implementation of size_hint() should not lead to memory safety violations.

That said, the implementation should provide a correct estimation, because otherwise it would be a violation of the trait's protocol.

The default implementation returns (0, None) which is correct for any stream.

Loading content...

Implementations on Foreign Types

impl<S> Stream for Take<S> where
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<T> Stream for Pending<T>[src]

type Item = T

impl<T, F> Stream for FromFn<F> where
    F: FnMut() -> Option<T>, 
[src]

type Item = T

impl<S> Stream for Fuse<S> where
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<'_> Stream for Incoming<'_>[src]

type Item = Result<TcpStream, Error>

impl<'a, S, T> Stream for Copied<S> where
    S: Stream<Item = &'a T>,
    T: 'a + Copy
[src]

type Item = T

impl<S, F, B> Stream for Map<S, F> where
    S: Stream,
    F: FnMut(<S as Stream>::Item) -> B, 
[src]

type Item = B

impl<A, B> Stream for Zip<A, B> where
    B: Stream,
    A: Stream
[src]

type Item = (<A as Stream>::Item, <B as Stream>::Item)

impl Stream for ReadDir[src]

type Item = Result<DirEntry, Error>

impl<T> Stream for Repeat<T> where
    T: Clone
[src]

type Item = T

impl Stream for Interval[src]

type Item = ()

impl<T> Stream for Once<T>[src]

type Item = T

impl<S, P> Stream for TakeWhile<S, P> where
    P: FnMut(&<S as Stream>::Item) -> bool,
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<S, U> Stream for Chain<S, U> where
    S: Stream,
    U: Stream<Item = <S as Stream>::Item>, 
[src]

type Item = <S as Stream>::Item

impl<I> Stream for FromIter<I> where
    I: Iterator
[src]

type Item = <I as Iterator>::Item

impl<S> Stream for Timeout<S> where
    S: Stream
[src]

type Item = Result<<S as Stream>::Item, TimeoutError>

impl<'_> Stream for Incoming<'_>[src]

type Item = Result<UnixStream, Error>

impl<R> Stream for Lines<R> where
    R: AsyncBufRead
[src]

type Item = Result<String, Error>

impl<S> Stream for StepBy<S> where
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<L, R, T> Stream for Merge<L, R> where
    L: Stream<Item = T>,
    R: Stream<Item = T>, 
[src]

type Item = T

impl<S> Stream for Skip<S> where
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<T> Stream for Empty<T>[src]

type Item = T

impl<'a, S, T> Stream for Cloned<S> where
    S: Stream<Item = &'a T>,
    T: 'a + Clone
[src]

type Item = T

impl<T, F> Stream for RepeatWith<F> where
    F: FnMut() -> T, 
[src]

type Item = T

impl<S, P> Stream for SkipWhile<S, P> where
    P: FnMut(&<S as Stream>::Item) -> bool,
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<S, P> Stream for Filter<S, P> where
    P: FnMut(&<S as Stream>::Item) -> bool,
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<R> Stream for Split<R> where
    R: AsyncBufRead
[src]

type Item = Result<Vec<u8, Global>, Error>

impl<S, U, F> Stream for FlatMap<S, U, F> where
    S: Stream,
    F: FnMut(<S as Stream>::Item) -> U,
    U: Stream
[src]

type Item = <U as Stream>::Item

impl<S, F> Stream for Inspect<S, F> where
    S: Stream,
    F: FnMut(&<S as Stream>::Item), 
[src]

type Item = <S as Stream>::Item

impl<T> Stream for Receiver<T>[src]

type Item = T

impl<S, St, F, B> Stream for Scan<S, St, F> where
    S: Stream,
    F: FnMut(&mut St, <S as Stream>::Item) -> Option<B>, 
[src]

type Item = B

impl<T> Stream for Bytes<T> where
    T: Unpin + AsyncRead
[src]

type Item = Result<u8, Error>

impl<S, U> Stream for Flatten<S> where
    S: Stream,
    U: Stream,
    <S as Stream>::Item: IntoStream,
    <<S as Stream>::Item as IntoStream>::IntoStream == U,
    <<S as Stream>::Item as IntoStream>::Item == <U as Stream>::Item
[src]

type Item = <U as Stream>::Item

impl<F, T> Stream for Successors<F, T> where
    F: FnMut(&T) -> Option<T>, 
[src]

type Item = T

impl<P> Stream for Pin<P> where
    P: DerefMut + Unpin,
    <P as Deref>::Target: Stream
[src]

type Item = <<P as Deref>::Target as Stream>::Item

impl<'_, S> Stream for &'_ mut S where
    S: Stream + Unpin + ?Sized
[src]

type Item = <S as Stream>::Item

impl<S> Stream for Box<S, Global> where
    S: Stream + Unpin + ?Sized
[src]

type Item = <S as Stream>::Item

impl<S> Stream for AssertUnwindSafe<S> where
    S: Stream
[src]

type Item = <S as Stream>::Item

impl<T> Stream for Receiver<T>

type Item = T

impl Stream for Timer

type Item = Instant

impl<R> Stream for Bytes<R> where
    R: Unpin + AsyncRead

type Item = Result<u8, Error>

impl<T> Stream for Empty<T>

type Item = T

impl<S, St, F, B> Stream for Scan<S, St, F> where
    S: Stream,
    F: FnMut(&mut St, <S as Stream>::Item) -> Option<B>, 

type Item = B

impl<S, F> Stream for Inspect<S, F> where
    S: Stream,
    F: FnMut(&<S as Stream>::Item), 

type Item = <S as Stream>::Item

impl<T, F> Stream for RepeatWith<F> where
    F: FnMut() -> T, 

type Item = T

impl<S> Stream for Take<S> where
    S: Stream

type Item = <S as Stream>::Item

impl<S, U> Stream for Flatten<S> where
    S: Stream<Item = U>,
    U: Stream

type Item = <U as Stream>::Item

impl<'a, S, T> Stream for Copied<S> where
    S: Stream<Item = &'a T>,
    T: 'a + Copy

type Item = T

impl<T, S1, S2> Stream for Race<S1, S2> where
    S1: Stream<Item = T>,
    S2: Stream<Item = T>, 

type Item = T

impl<S> Stream for Enumerate<S> where
    S: Stream

type Item = (usize, <S as Stream>::Item)

impl<S, U> Stream for Chain<S, U> where
    S: Stream,
    U: Stream<Item = <S as Stream>::Item>, 

type Item = <S as Stream>::Item

impl<T, S1, S2> Stream for Or<S1, S2> where
    S1: Stream<Item = T>,
    S2: Stream<Item = T>, 

type Item = T

impl<T, F, Fut, Item> Stream for Unfold<T, F, Fut> where
    F: FnMut(T) -> Fut,
    Fut: Future<Output = Option<(Item, T)>>, 

type Item = Item

impl<T> Stream for Repeat<T> where
    T: Clone

type Item = T

impl<S, F, Fut> Stream for Then<S, F, Fut> where
    S: Stream,
    F: FnMut(<S as Stream>::Item) -> Fut,
    Fut: Future

type Item = <Fut as Future>::Output

impl<R> Stream for Lines<R> where
    R: AsyncBufRead

type Item = Result<String, Error>

impl<T> Stream for Pending<T>

type Item = T

impl<S, P> Stream for SkipWhile<S, P> where
    P: FnMut(&<S as Stream>::Item) -> bool,
    S: Stream

type Item = <S as Stream>::Item

impl<S, P> Stream for Filter<S, P> where
    P: FnMut(&<S as Stream>::Item) -> bool,
    S: Stream

type Item = <S as Stream>::Item

impl<S, U, F> Stream for FlatMap<S, U, F> where
    S: Stream,
    F: FnMut(<S as Stream>::Item) -> U,
    U: Stream

type Item = <U as Stream>::Item

impl<T, E, F, Fut, Item> Stream for TryUnfold<T, F, Fut> where
    F: FnMut(T) -> Fut,
    Fut: Future<Output = Result<Option<(Item, T)>, E>>, 

type Item = Result<Item, E>

impl<I> Stream for Iter<I> where
    I: Iterator

type Item = <I as Iterator>::Item

impl<S, F, T> Stream for FilterMap<S, F> where
    S: Stream,
    F: FnMut(<S as Stream>::Item) -> Option<T>, 

type Item = T

impl<'a, S, T> Stream for Cloned<S> where
    S: Stream<Item = &'a T>,
    T: 'a + Clone

type Item = T

impl<T> Stream for Once<T>

type Item = T

impl<S> Stream for Cycle<S> where
    S: Stream + Clone

type Item = <S as Stream>::Item

impl<S> Stream for StepBy<S> where
    S: Stream

type Item = <S as Stream>::Item

impl<S> Stream for Skip<S> where
    S: Stream

type Item = <S as Stream>::Item

impl<S, F, T> Stream for Map<S, F> where
    S: Stream,
    F: FnMut(<S as Stream>::Item) -> T, 

type Item = T

impl<A, B> Stream for Zip<A, B> where
    B: Stream,
    A: Stream

type Item = (<A as Stream>::Item, <B as Stream>::Item)

impl<S> Stream for Fuse<S> where
    S: Stream

type Item = <S as Stream>::Item

impl<T, F> Stream for PollFn<F> where
    F: FnMut(&mut Context<'_>) -> Poll<Option<T>>, 

type Item = T

impl<S, P> Stream for TakeWhile<S, P> where
    P: FnMut(&<S as Stream>::Item) -> bool,
    S: Stream

type Item = <S as Stream>::Item

impl<R> Stream for Split<R> where
    R: AsyncBufRead

type Item = Result<Vec<u8, Global>, Error>

impl<T> Stream for Unblock<T> where
    T: 'static + Send + Iterator,
    <T as Iterator>::Item: Send,
    <T as Iterator>::Item: 'static, 

type Item = <T as Iterator>::Item

impl<R> Stream for Decoder<R> where
    R: Unpin + AsyncBufRead

type Item = Result<Event, Error>

impl Stream for WebSocketConnection[src]

type Item = Result<Message, Error>

impl<T> Stream for WebSocketStream<T> where
    T: AsyncRead + AsyncWrite + Unpin

type Item = Result<Message, Error>

Loading content...

Implementors

Loading content...