stm32f3xx-hal
stm32f3xx-hal contains a multi device hardware abstraction on top of the
peripheral access API for the STMicro STM32F3 series microcontrollers. The
selection of the MCU is done by feature gates, typically specified by board
support crates. Currently supported configurations are:
- stm32f301 ✔️ YES!
- stm32f318 ✔️ YES!
- stm32f302 ✔️ YES!
- stm32f303 ✔️ YES!
- stm32f373 ✔️ YES!
- stm32f378 ✔️ YES!
- stm32f334 ✔️ YES!
- stm32f328 ✔️ YES!
- stm32f358 ✔️ YES!
- stm32f398 ✔️ YES!
The idea behind this crate is to gloss over the slight differences in the various peripherals available on those MCUs so a HAL can be written for all chips in that same family without having to cut and paste crates for every single model.
Collaboration on this crate is highly welcome as are pull requests!
This crate relies on Adam Greigs fantastic stm32f3 crate to provide
appropriate register definitions and implements a partial set of the
embedded-hal traits.
Almost all of the implementation was shamelessly adapted from the
stm32f30x-hal crate by Jorge Aparicio.