Struct probe_rs::FakeProbe [−][src]
pub struct FakeProbe { /* fields omitted */ }
Implementations
pub fn handle_dap_register_read(
&mut self,
handler: Box<dyn Fn(PortType, u8) -> Result<u32, DebugProbeError> + Send>
)
pub fn handle_dap_register_write(
&mut self,
handler: Box<dyn Fn(PortType, u8, u32) -> Result<(), DebugProbeError> + Send>
)
Trait Implementations
Leave debug mode
Resets the target device.
fn new_from_selector(
_selector: impl Into<DebugProbeSelector>
) -> Result<Box<Self>, DebugProbeError> where
Self: Sized,
Get the currently used maximum speed for the debug protocol in kHz. Read more
Set the speed in kHz used for communication with the target device. Read more
Selects the transport protocol to be used by the debug probe.
This should assert the reset pin of the target via debug probe.
This should deassert the reset pin of the target via debug probe.
fn try_get_arm_interface<'probe>(
self: Box<Self>
) -> Result<Box<dyn UninitializedArmProbe + 'probe>, (Box<dyn DebugProbe>, DebugProbeError)>
fn try_get_arm_interface<'probe>(
self: Box<Self>
) -> Result<Box<dyn UninitializedArmProbe + 'probe>, (Box<dyn DebugProbe>, DebugProbeError)>
Get the dedicated interface to debug ARM chips. To check that the probe actually supports this, call DebugProbe::has_arm_interface first. Read more
Check if the proble offers an interface to debug ARM chips.
fn try_get_riscv_interface(
self: Box<Self>
) -> Result<RiscvCommunicationInterface, (Box<dyn DebugProbe>, DebugProbeError)>
fn try_get_riscv_interface(
self: Box<Self>
) -> Result<RiscvCommunicationInterface, (Box<dyn DebugProbe>, DebugProbeError)>
Get the dedicated interface to debug RISCV chips. Ensure that the probe actually supports this by calling DebugProbe::has_riscv_interface first. Read more
Check if the probe offers an interface to debug RISCV chips.
Reads the target voltage in Volts, if possible. Returns Ok(None)
if the probe doesn’t support reading the target voltage. Read more
Reads the DAP register on the specified port and address
fn raw_write_register(
&mut self,
port: PortType,
addr: u8,
value: u32
) -> Result<(), DebugProbeError>
fn raw_write_register(
&mut self,
port: PortType,
addr: u8,
value: u32
) -> Result<(), DebugProbeError>
Writes a value to the DAP register on the specified port and address
Send a specific output sequence over JTAG or SWD. Read more
Set the state of debugger output pins directly. Read more
fn raw_read_block(
&mut self,
port: PortType,
addr: u8,
values: &mut [u32]
) -> Result<(), DebugProbeError>
fn raw_read_block(
&mut self,
port: PortType,
addr: u8,
values: &mut [u32]
) -> Result<(), DebugProbeError>
Read multiple values from the same DAP register. Read more
fn raw_write_block(
&mut self,
port: PortType,
addr: u8,
values: &[u32]
) -> Result<(), DebugProbeError>
fn raw_write_block(
&mut self,
port: PortType,
addr: u8,
values: &[u32]
) -> Result<(), DebugProbeError>
Write multiple values to the same DAP register. Read more
Auto Trait Implementations
impl !RefUnwindSafe for FakeProbe
impl !UnwindSafe for FakeProbe
Blanket Implementations
Mutably borrows from an owned value. Read more
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
Causes self
to use its Binary
implementation when Debug
-formatted.
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
Causes self
to use its Octal
implementation when Debug
-formatted.
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
impl<T> Pipe for T where
T: ?Sized,
impl<T> Pipe for T where
T: ?Sized,
Pipes by value. This is generally the method you want to use. Read more
Borrows self
and passes that borrow into the pipe function. Read more
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
Mutably borrows self
and passes that borrow into the pipe function. Read more
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.borrow()
into the pipe function. Read more
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.as_ref()
into the pipe function.
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.deref()
into the pipe function.
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Immutable access to the Borrow<B>
of a value. Read more
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the BorrowMut<B>
of a value. Read more
Immutable access to the AsRef<R>
view of a value. Read more
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Mutable access to the AsMut<R>
view of a value. Read more
Immutable access to the Deref::Target
of a value. Read more
Mutable access to the Deref::Target
of a value. Read more
Calls .tap()
only in debug builds, and is erased in release builds.
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more