Struct probe_rs::Core [−][src]
pub struct Core<'probe> { /* fields omitted */ }
Implementations
Wait until the core is halted. If the core does not halt on its own,
a DebugProbeError::Timeout
error will be returned.
Check if the core is halted. If the core does not halt on its own,
a DebugProbeError::Timeout
error will be returned.
Try to halt the core. This function ensures the core is actually halted, and
returns a DebugProbeError::Timeout
otherwise.
Reset the core, and then continue to execute instructions. If the core
should be halted after reset, use the reset_and_halt
function.
Reset the core, and then immediately halt. To continue execution after
reset, use the reset
function.
Steps one instruction and then enters halted state again.
pub fn read_core_reg(
&mut self,
address: impl Into<CoreRegisterAddress>
) -> Result<u32, Error>
pub fn write_core_reg(
&mut self,
address: CoreRegisterAddress,
value: u32
) -> Result<(), Error>
Set a hardware breakpoint
This function will try to set a hardware breakpoint. The amount
of hardware breakpoints which are supported is chip specific,
and can be queried using the get_available_breakpoint_units
function.
Clear all hardware breakpoints
This function will clear all HW breakpoints which are configured on the target,
regardless if they are set by probe-rs, AND regardless if they are enabled or not.
Also used as a helper function in Session::drop
.
Trait Implementations
Read a 32bit word of at address
. Read more
Read a block of 32bit words at address
. Read more
Read a block of 8bit words at address
.
Write a 32bit word at address
. Read more
Write an 8bit word at address
.
Write a block of 32bit words at address
. Read more
Write a block of 8bit words at address
.
Reads bytes using 32 bit memory access. Address must be 32 bit aligned and data must be an exact multiple of 4. Read more
Auto Trait Implementations
impl<'probe> !RefUnwindSafe for Core<'probe>
impl<'probe> !UnwindSafe for Core<'probe>
Blanket Implementations
Mutably borrows from an owned value. Read more
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
Causes self
to use its Binary
implementation when Debug
-formatted.
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
Causes self
to use its Octal
implementation when Debug
-formatted.
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
impl<T> Pipe for T where
T: ?Sized,
impl<T> Pipe for T where
T: ?Sized,
Pipes by value. This is generally the method you want to use. Read more
Borrows self
and passes that borrow into the pipe function. Read more
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
Mutably borrows self
and passes that borrow into the pipe function. Read more
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.borrow()
into the pipe function. Read more
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.as_ref()
into the pipe function.
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.deref()
into the pipe function.
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Immutable access to the Borrow<B>
of a value. Read more
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the BorrowMut<B>
of a value. Read more
Immutable access to the AsRef<R>
view of a value. Read more
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Mutable access to the AsMut<R>
view of a value. Read more
Immutable access to the Deref::Target
of a value. Read more
Mutable access to the Deref::Target
of a value. Read more
Calls .tap()
only in debug builds, and is erased in release builds.
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more