#!/bin/sh # install.sh - LIVEN Cross-Platform Download & Install Script # Fetches the pre-built binary archive from GitHub releases and installs it. # Supported targets: # Linux x86_64 -> liven-linux-amd64.tar.gz # Linux ARM64 -> liven-linux-arm64.tar.gz # macOS x86_64 -> liven-macos-amd64.tar.gz # macOS ARM64 -> liven-macos-arm64.tar.gz # Windows x86_64 -> liven-windows-amd64.zip # Windows ARM64 -> liven-windows-arm64.zip # # Archive names/formats above MUST match what the release pipeline's # `package` job actually uploads — if you rename assets there, update # the PLATFORM_ARCH mapping below to match. set -e REPO="livendb/liven" # ---- Argument parsing ---- ENV="production" VERSION="" DETECT_ONLY="false" while [ "$#" -gt 0 ]; do case "$1" in --env) ENV="$2" shift 2 ;; --env=*) ENV="${1#*=}" shift 1 ;; --version) VERSION="$2" shift 2 ;; --version=*) VERSION="${1#*=}" shift 1 ;; --detect-only) DETECT_ONLY="true" shift 1 ;; *) shift 1 ;; esac done # ---- OS & Architecture detection ---- OS="$(uname -s 2>/dev/null || echo "Windows")" ARCH="$(uname -m 2>/dev/null || echo "x86_64")" # Normalize OS name case "$OS" in Linux) OS_NORMALIZED="Linux" ;; Darwin) OS_NORMALIZED="Darwin" ;; *) OS_NORMALIZED="Windows" ;; esac # Normalize architecture case "$ARCH" in x86_64|amd64) ARCH_NORMALIZED="x86_64" ;; aarch64|arm64) ARCH_NORMALIZED="aarch64" ;; *) ARCH_NORMALIZED="$ARCH" ;; esac # ---- Resolve version: explicit --version, else latest GitHub release ---- # On API rate-limit or network failure, fall back to GitHub's # /releases/latest/download/ redirect URLs (no version needed). LATEST_URL="https://github.com/${REPO}/releases/latest/download" if [ -z "$VERSION" ]; then if command -v curl >/dev/null 2>&1; then VERSION="$(curl -fsSL "https://api.github.com/repos/${REPO}/releases/latest" 2>/dev/null | grep -m1 '"tag_name"' | sed -E 's/.*"tag_name": *"([^"]+)".*/\1/')" elif command -v wget >/dev/null 2>&1; then VERSION="$(wget -qO- "https://api.github.com/repos/${REPO}/releases/latest" 2>/dev/null | grep -m1 '"tag_name"' | sed -E 's/.*"tag_name": *"([^"]+)".*/\1/')" fi fi if [ -n "$VERSION" ]; then BASE_URL="https://github.com/${REPO}/releases/download/${VERSION}" else VERSION="latest" BASE_URL="${LATEST_URL}" echo "Note: could not determine latest version from API, using latest release." fi echo "Detected OS: $OS_NORMALIZED" echo "Detected Arch: $ARCH_NORMALIZED" echo "Version: $VERSION" echo "Environment: $ENV" # ---- Map OS/Arch to release asset platform-arch naming ---- case "${OS_NORMALIZED}-${ARCH_NORMALIZED}" in Linux-x86_64) TARGET="x86_64-unknown-linux-gnu" ;; Linux-aarch64) TARGET="aarch64-unknown-linux-gnu" ;; Darwin-x86_64) TARGET="x86_64-apple-darwin" ;; Darwin-aarch64) TARGET="aarch64-apple-darwin" ;; Windows-x86_64) TARGET="x86_64-pc-windows-msvc" ;; Windows-aarch64) TARGET="aarch64-pc-windows-msvc" ;; *) echo "Unsupported platform: ${OS_NORMALIZED}/${ARCH_NORMALIZED}" echo "Please build from source: https://github.com/${REPO}" exit 1 ;; esac ARCHIVE_NAME="liven-${TARGET}.zip" ARCHIVE_URL="${BASE_URL}/${ARCHIVE_NAME}" BINARY_NAME="liven" if [ "$OS_NORMALIZED" = "Windows" ]; then BINARY_NAME="liven.exe" fi # ---- Detection-only mode: stop here, no download/install ---- if [ "$DETECT_ONLY" = "true" ]; then echo "Resolved archive: $ARCHIVE_NAME" echo "Resolved URL: $ARCHIVE_URL" echo "PASS: detection-only mode, exiting before download/install." exit 0 fi # ---- Determine download tool ---- if command -v curl >/dev/null 2>&1; then DOWNLOAD_CMD="curl -fsSL -o" elif command -v wget >/dev/null 2>&1; then DOWNLOAD_CMD="wget -q -O" else echo "Error: neither curl nor wget is available. Please install one of them." exit 1 fi # ---- Windows: download, extract (.zip), print instructions ---- if [ "$OS_NORMALIZED" = "Windows" ]; then echo "Downloading ${ARCHIVE_NAME}..." $DOWNLOAD_CMD "./${ARCHIVE_NAME}" "$ARCHIVE_URL" echo "Extracting ${ARCHIVE_NAME}..." if command -v unzip >/dev/null 2>&1; then unzip -oq "./${ARCHIVE_NAME}" elif command -v powershell >/dev/null 2>&1; then powershell -NoProfile -Command "Expand-Archive -Path '.\\${ARCHIVE_NAME}' -DestinationPath '.'" else echo "Error: neither unzip nor powershell is available for extraction." exit 1 fi echo "============================================================" echo " LIVEN Windows Installation " echo "============================================================" echo "Binary extracted to: ./${BINARY_NAME}" echo "" echo "Next steps:" echo " 1. Move the binary to your PATH:" echo " move .\\${BINARY_NAME} liven.exe" echo " 2. Run: liven.exe start" echo " 3. Create a liven.toml configuration file as needed." echo "============================================================" exit 0 fi # ---- Unix / macOS: download, extract (.zip), install, configure ---- # Use system paths only if /usr/local/bin is user-writable (brew on macOS). # Otherwise install to ~/.liven/bin — no sudo needed, no password prompts. if [ -w /usr/local/bin ] 2>/dev/null; then INSTALL_DIR="/usr/local/bin" CONFIG_DIR="/etc/liven" DATA_DIR="/var/lib/liven" LOG_DIR="/var/log/liven" USE_SUDO="" SYSTEM_WIDE=true else # User-local install — no sudo needed INSTALL_DIR="${HOME}/.liven/bin" CONFIG_DIR="${HOME}/.liven" DATA_DIR="${HOME}/.liven/data" LOG_DIR="${HOME}/.liven/logs" USE_SUDO="" SYSTEM_WIDE=false fi # Check if already installed CURRENT_VERSION="" if command -v "$INSTALL_DIR/liven" >/dev/null 2>&1; then CURRENT_VERSION="$("$INSTALL_DIR/liven" --version 2>/dev/null || true)" if [ -n "$CURRENT_VERSION" ]; then echo "Liven already installed: $CURRENT_VERSION" echo "Upgrading to: v$VERSION" else echo "Liven already installed. Upgrading to v$VERSION..." fi echo "" fi echo "Downloading ${ARCHIVE_NAME} from ${ARCHIVE_URL} ..." $DOWNLOAD_CMD "/tmp/${ARCHIVE_NAME}" "$ARCHIVE_URL" echo "Extracting ${ARCHIVE_NAME}..." # Files are at the archive root (liven + liven.toml), no subfolder unzip -oq "/tmp/${ARCHIVE_NAME}" -d "/tmp/" BINARY_PATH="/tmp/${BINARY_NAME}" chmod +x "$BINARY_PATH" # Ensure directories exist $USE_SUDO mkdir -p "$INSTALL_DIR" $USE_SUDO mkdir -p "$CONFIG_DIR" $USE_SUDO mkdir -p "$LOG_DIR" $USE_SUDO chmod 700 "$LOG_DIR" $USE_SUDO mkdir -p "$DATA_DIR" $USE_SUDO chmod 700 "$DATA_DIR" # Install binary $USE_SUDO cp "$BINARY_PATH" "$INSTALL_DIR/liven" $USE_SUDO chmod +x "$INSTALL_DIR/liven" # Clean up downloaded artifacts rm -f "/tmp/${ARCHIVE_NAME}" rm -f "$BINARY_PATH" # ---- Setup Configuration ---- if [ "$ENV" = "production" ]; then $USE_SUDO tee "$CONFIG_DIR/liven.toml" > /dev/null << TOML [server] environment = "production" host = "0.0.0.0" db_port = 43121 webui_port = 43120 [storage] data_directory = "$DATA_DIR" [security] mode = "auth_key" [security.ztna] enabled = true cert_path = "$CONFIG_DIR/certs/server.crt" key_path = "$CONFIG_DIR/certs/server.key" client_ca_path = "$CONFIG_DIR/certs/ca.crt" TOML # Provision TLS Certificates $USE_SUDO mkdir -p "$CONFIG_DIR/certs" if command -v openssl >/dev/null; then echo "Provisioning self-signed production CA and Server certificates..." $USE_SUDO openssl genrsa -out "$CONFIG_DIR/certs/ca.key" 2048 2>/dev/null $USE_SUDO openssl req -x509 -new -nodes -key "$CONFIG_DIR/certs/ca.key" -sha256 -days 365 \ -out "$CONFIG_DIR/certs/ca.crt" -subj "/CN=MyLIVENCA" 2>/dev/null $USE_SUDO openssl genrsa -out "$CONFIG_DIR/certs/server.key" 2048 2>/dev/null $USE_SUDO openssl req -new -key "$CONFIG_DIR/certs/server.key" -out "$CONFIG_DIR/certs/server.csr" \ -subj "/CN=127.0.0.1" 2>/dev/null $USE_SUDO openssl x509 -req -in "$CONFIG_DIR/certs/server.csr" \ -CA "$CONFIG_DIR/certs/ca.crt" -CAkey "$CONFIG_DIR/certs/ca.key" -CAcreateserial \ -out "$CONFIG_DIR/certs/server.crt" -days 365 -sha256 2>/dev/null $USE_SUDO chmod 600 "$CONFIG_DIR/certs/ca.key" $USE_SUDO chmod 600 "$CONFIG_DIR/certs/server.key" $USE_SUDO chmod 644 "$CONFIG_DIR/certs/ca.crt" $USE_SUDO chmod 644 "$CONFIG_DIR/certs/server.crt" else echo "Warning: openssl not found, writing placeholder certs" $USE_SUDO touch "$CONFIG_DIR/certs/ca.crt" $USE_SUDO touch "$CONFIG_DIR/certs/ca.key" $USE_SUDO touch "$CONFIG_DIR/certs/server.crt" $USE_SUDO touch "$CONFIG_DIR/certs/server.key" $USE_SUDO chmod 600 "$CONFIG_DIR/certs/ca.key" $USE_SUDO chmod 600 "$CONFIG_DIR/certs/server.key" fi else $USE_SUDO tee "$CONFIG_DIR/liven.toml" > /dev/null << TOML [server] environment = "development" host = "127.0.0.1" db_port = 43121 webui_port = 43120 [storage] data_directory = "$DATA_DIR" [security] mode = "none" TOML fi # ---- Setup OS-specific launch service (system-wide only) ---- if [ "$SYSTEM_WIDE" = true ]; then if [ "$OS_NORMALIZED" = "Linux" ]; then # Check if systemd is running if [ -d /run/systemd/system ] || ( command -v systemctl >/dev/null 2>&1 && systemctl is-system-running >/dev/null 2>&1 ); then echo "Systemd detected. Configuring systemd service unit..." $USE_SUDO tee /etc/systemd/system/liven.service > /dev/null << 'SERVICE' [Unit] Description=LIVEN High-Performance Storage Engine After=network.target [Service] Type=simple User=root ExecStart=/usr/local/bin/liven start --config /etc/liven/liven.toml Restart=on-failure StandardOutput=append:/var/log/liven/access.log StandardError=append:/var/log/liven/error.log [Install] WantedBy=multi-user.target SERVICE if command -v systemctl >/dev/null; then $USE_SUDO systemctl daemon-reload || true fi else echo "Non-Systemd/Container environment detected. Installing POSIX entrypoint shell script..." $USE_SUDO tee /usr/local/bin/liven-entrypoint > /dev/null << 'SCRIPT' #!/bin/sh exec /usr/local/bin/liven start --config /etc/liven/liven.toml SCRIPT $USE_SUDO chmod +x /usr/local/bin/liven-entrypoint fi elif [ "$OS_NORMALIZED" = "Darwin" ]; then echo "macOS detected. Configuring launchd plist..." $USE_SUDO mkdir -p /Library/LaunchDaemons $USE_SUDO tee /Library/LaunchDaemons/com.liven.liven.plist > /dev/null << 'PLIST' Label com.liven.liven ProgramArguments /usr/local/bin/liven start --config /etc/liven/liven.toml RunAtLoad KeepAlive PLIST fi fi # ---- Ensure install directory is in PATH (user-local only) ---- if [ "$SYSTEM_WIDE" = false ]; then case ":$PATH:" in *":$INSTALL_DIR:"*) : ;; # already in PATH *) echo "Adding $INSTALL_DIR to PATH in shell configuration..." for rc in "${HOME}/.bashrc" "${HOME}/.zshrc" "${HOME}/.profile"; do if [ -f "$rc" ]; then if ! grep -q "export PATH=.*\$HOME/\.liven/bin" "$rc"; then echo "" >> "$rc" echo "# Added by Liven installer" >> "$rc" echo "export PATH=\"\$HOME/.liven/bin:\$PATH\"" >> "$rc" fi fi done # Also try a more generic approach for other shells (fish, etc.) if command -v fish >/dev/null 2>&1; then fish_conf="${HOME}/.config/fish/config.fish" mkdir -p "$(dirname "$fish_conf")" if ! grep -q "fish_add_path.*local/bin" "$fish_conf" 2>/dev/null; then echo "" >> "$fish_conf" echo "# Added by Liven installer" >> "$fish_conf" echo "fish_add_path \$HOME/.liven/bin" >> "$fish_conf" fi fi export PATH="$INSTALL_DIR:$PATH" echo " ✓ Added to PATH for current and future shell sessions." ;; esac fi echo "✨ LIVEN ${VERSION} installation completed successfully!" echo " Binary: $INSTALL_DIR/liven" echo " Config: $CONFIG_DIR/liven.toml" if [ "$SYSTEM_WIDE" = false ]; then echo "" echo " Open a new terminal or run: source ~/.bashrc (or ~/.zshrc)" echo " Then: liven start" fi