[−][src]Module imxrt1062_usdhc1::prot_ctrl

Protocol Control

Structs

BURST_LEN_EN_W	Write proxy for field `BURST_LEN_EN`
CDSS_W	Write proxy for field `CDSS`
CDTL_W	Write proxy for field `CDTL`
CREQ_W	Write proxy for field `CREQ`
D3CD_W	Write proxy for field `D3CD`
DMASEL_W	Write proxy for field `DMASEL`
DTW_W	Write proxy for field `DTW`
EMODE_W	Write proxy for field `EMODE`
IABG_W	Write proxy for field `IABG`
LCTL_W	Write proxy for field `LCTL`
NON_EXACT_BLK_RD_W	Write proxy for field `NON_EXACT_BLK_RD`
RD_DONE_NO_8CLK_W	Write proxy for field `RD_DONE_NO_8CLK`
RWCTL_W	Write proxy for field `RWCTL`
SABGREQ_W	Write proxy for field `SABGREQ`
WECINS_W	Write proxy for field `WECINS`
WECINT_W	Write proxy for field `WECINT`
WECRM_W	Write proxy for field `WECRM`

BURST_LEN_EN_A	BURST length enable for INCR, INCR4 / INCR8 / INCR16, INCR4-WRAP / INCR8-WRAP / INCR16-WRAP
CDSS_A	Card Detect Signal Selection
CDTL_A	Card Detect Test Level
CREQ_A	Continue Request
D3CD_A	DATA3 as Card Detection Pin
DMASEL_A	DMA Select
DTW_A	Data Transfer Width
EMODE_A	Endian Mode
IABG_A	Interrupt At Block Gap
LCTL_A	LED Control
NON_EXACT_BLK_RD_A	NON_EXACT_BLK_RD
RWCTL_A	Read Wait Control
SABGREQ_A	Stop At Block Gap Request
WECINS_A	Wakeup Event Enable On SD Card Insertion
WECINT_A	Wakeup Event Enable On Card Interrupt
WECRM_A	Wakeup Event Enable On SD Card Removal

BURST_LEN_EN_R	Reader of field `BURST_LEN_EN`
CDSS_R	Reader of field `CDSS`
CDTL_R	Reader of field `CDTL`
CREQ_R	Reader of field `CREQ`
D3CD_R	Reader of field `D3CD`
DMASEL_R	Reader of field `DMASEL`
DTW_R	Reader of field `DTW`
EMODE_R	Reader of field `EMODE`
IABG_R	Reader of field `IABG`
LCTL_R	Reader of field `LCTL`
NON_EXACT_BLK_RD_R	Reader of field `NON_EXACT_BLK_RD`
R	Reader of register PROT_CTRL
RD_DONE_NO_8CLK_R	Reader of field `RD_DONE_NO_8CLK`
RWCTL_R	Reader of field `RWCTL`
SABGREQ_R	Reader of field `SABGREQ`
W	Writer for register PROT_CTRL
WECINS_R	Reader of field `WECINS`
WECINT_R	Reader of field `WECINT`
WECRM_R	Reader of field `WECRM`