[−][src]Module imxrt1062_csi::csicr18

CSI Control Register 18

Structs

AHB_HPROT_W	Write proxy for field `AHB_HPROT`
BASEADDR_CHANGE_ERROR_IE_W	Write proxy for field `BASEADDR_CHANGE_ERROR_IE`
BASEADDR_SWITCH_EN_W	Write proxy for field `BASEADDR_SWITCH_EN`
BASEADDR_SWITCH_SEL_W	Write proxy for field `BASEADDR_SWITCH_SEL`
CSI_ENABLE_W	Write proxy for field `CSI_ENABLE`
DEINTERLACE_EN_W	Write proxy for field `DEINTERLACE_EN`
DMA_FIELD1_DONE_IE_W	Write proxy for field `DMA_FIELD1_DONE_IE`
FIELD0_DONE_IE_W	Write proxy for field `FIELD0_DONE_IE`
LAST_DMA_REQ_SEL_W	Write proxy for field `LAST_DMA_REQ_SEL`
MASK_OPTION_W	Write proxy for field `MASK_OPTION`
PARALLEL24_EN_W	Write proxy for field `PARALLEL24_EN`
RGB888A_FORMAT_SEL_W	Write proxy for field `RGB888A_FORMAT_SEL`

BASEADDR_SWITCH_SEL_A	CSI 2 base addresses switching method. When using this bit, BASEADDR_SWITCH_EN is 1.
DEINTERLACE_EN_A	This bit is used to select the output method When input is standard CCIR656 video.
DMA_FIELD1_DONE_IE_A	When in interlace mode, field 1 done interrupt enable.
FIELD0_DONE_IE_A	In interlace mode, fileld 0 means interrupt enabled.
LAST_DMA_REQ_SEL_A	Choosing the last DMA request condition.
MASK_OPTION_A	These bits used to choose the method to mask the CSI input.
RGB888A_FORMAT_SEL_A	Output is 32-bit format.

AHB_HPROT_R	Reader of field `AHB_HPROT`
BASEADDR_CHANGE_ERROR_IE_R	Reader of field `BASEADDR_CHANGE_ERROR_IE`
BASEADDR_SWITCH_EN_R	Reader of field `BASEADDR_SWITCH_EN`
BASEADDR_SWITCH_SEL_R	Reader of field `BASEADDR_SWITCH_SEL`
CSI_ENABLE_R	Reader of field `CSI_ENABLE`
DEINTERLACE_EN_R	Reader of field `DEINTERLACE_EN`
DMA_FIELD1_DONE_IE_R	Reader of field `DMA_FIELD1_DONE_IE`
FIELD0_DONE_IE_R	Reader of field `FIELD0_DONE_IE`
LAST_DMA_REQ_SEL_R	Reader of field `LAST_DMA_REQ_SEL`
MASK_OPTION_R	Reader of field `MASK_OPTION`
PARALLEL24_EN_R	Reader of field `PARALLEL24_EN`
R	Reader of register CSICR18
RGB888A_FORMAT_SEL_R	Reader of field `RGB888A_FORMAT_SEL`
W	Writer for register CSICR18