Crate im_rc

source · []
Expand description

Immutable Data Structures for Rust

This library implements several of the more commonly useful immutable data structures for Rust.

What are immutable data structures?

Immutable data structures are data structures which can be copied and modified efficiently without altering the original. The most uncomplicated example of this is the venerable cons list. This crate offers a selection of more modern and flexible data structures with similar properties, tuned for the needs of Rust developers.

Briefly, the following data structures are provided:

Why Would I Want This?

While immutable data structures can be a game changer for other programming languages, the most obvious benefit - avoiding the accidental mutation of data - is already handled so well by Rust’s type system that it’s just not something a Rust programmer needs to worry about even when using data structures that would send a conscientious Clojure programmer into a panic.

Immutable data structures offer other benefits, though, some of which are useful even in a language like Rust. The most prominent is structural sharing, which means that if two data structures are mostly copies of each other, most of the memory they take up will be shared between them. This implies that making copies of an immutable data structure is cheap: it’s really only a matter of copying a pointer and increasing a reference counter, where in the case of Vec you have to allocate the same amount of memory all over again and make a copy of every element it contains. For immutable data structures, extra memory isn’t allocated until you modify either the copy or the original, and then only the memory needed to record the difference.

Another goal of this library has been the idea that you shouldn’t even have to think about what data structure to use in any given situation, until the point where you need to start worrying about optimisation - which, in practice, often never comes. Beyond the shape of your data (ie. whether to use a list or a map), it should be fine not to think too carefully about data structures - you can just pick the one that has the right shape and it should have acceptable performance characteristics for every operation you might need. Specialised data structures will always be faster at what they’ve been specialised for, but im aims to provide the data structures which deliver the least chance of accidentally using them for the wrong thing.

For instance, Vec beats everything at memory usage, indexing and operations that happen at the back of the list, but is terrible at insertion and removal, and gets worse the closer to the front of the list you get. VecDeque adds a little bit of complexity in order to make operations at the front as efficient as operations at the back, but is still bad at insertion and especially concatenation. Vector adds another bit of complexity, and could never match Vec at what it’s best at, but in return every operation you can throw at it can be completed in a reasonable amount of time - even normally expensive operations like copying and especially concatenation are reasonably cheap when using a Vector.

It should be noted, however, that because of its simplicity, Vec actually beats Vector even at its strongest operations at small sizes, just because modern CPUs are hyperoptimised for things like copying small chunks of contiguous memory - you actually need to go past a certain size (usually in the vicinity of several hundred elements) before you get to the point where Vec isn’t always going to be the fastest choice. Vector attempts to overcome this by actually just being an array at very small sizes, and being able to switch efficiently to the full data structure when it grows large enough. Thus, Vector will actually be equivalent to Vec until it grows past the size of a single chunk.

The maps - HashMap and OrdMap - generally perform similarly to their equivalents in the standard library, but tend to run a bit slower on the basic operations (HashMap is almost neck and neck with its counterpart, while OrdMap currently tends to run 2-3x slower). On the other hand, they offer the cheap copy and structural sharing between copies that you’d expect from immutable data structures.

In conclusion, the aim of this library is to provide a safe default choice for the most common kinds of data structures, allowing you to defer careful thinking about the right data structure for the job until you need to start looking for optimisations - and you may find, especially for larger data sets, that immutable data structures are still the right choice.

Values

Because we need to make copies of shared nodes in these data structures before updating them, the values you store in them must implement Clone. For primitive values that implement Copy, such as numbers, everything is fine: this is the case for which the data structures are optimised, and performance is going to be great.

On the other hand, if you want to store values for which cloning is expensive, or values that don’t implement Clone, you need to wrap them in Rc or Arc. Thus, if you have a complex structure BigBlobOfData and you want to store a list of them as a Vector<BigBlobOfData>, you should instead use a Vector<Rc<BigBlobOfData>>, which is going to save you not only the time spent cloning the big blobs of data, but also the memory spent keeping multiple copies of it around, as Rc keeps a single reference counted copy around instead.

If you’re storing smaller values that aren’t Copyable, you’ll need to exercise judgement: if your values are going to be very cheap to clone, as would be the case for short Strings or small Vecs, you’re probably better off storing them directly without wrapping them in an Rc, because, like the Rc, they’re just pointers to some data on the heap, and that data isn’t expensive to clone - you might actually lose more performance from the extra redirection of wrapping them in an Rc than you would from occasionally cloning them.

When does cloning happen?

So when will your values actually be cloned? The easy answer is only if you clone the data structure itself, and then only lazily as you change it. Values are stored in tree nodes inside the data structure, each node of which contains up to 64 values. When you clone a data structure, nothing is actually copied - it’s just the reference count on the root node that’s incremented, to indicate that it’s shared between two data structures. It’s only when you actually modify one of the shared data structures that nodes are cloned: when you make a change somewhere in the tree, the node containing the change needs to be cloned, and then its parent nodes need to be updated to contain the new child node instead of the old version, and so they’re cloned as well.

We can call this “lazy” cloning - if you make two copies of a data structure and you never change either of them, there’s never any need to clone the data they contain. It’s only when you start making changes that cloning starts to happen, and then only on the specific tree nodes that are part of the change. Note that the implications of lazily cloning the data structure extend to memory usage as well as the CPU workload of copying the data around - cloning an immutable data structure means both copies share the same allocated memory, until you start making changes.

Most crucially, if you never clone the data structure, the data inside it is also never cloned, and in this case it acts just like a mutable data structure, with minimal performance differences (but still non-zero, as we still have to check for shared nodes).

Data Structures

We’ll attempt to provide a comprehensive guide to the available data structures below.

Performance Notes

“Big O notation” is the standard way of talking about the time complexity of data structure operations. If you’re not familiar with big O notation, here’s a quick cheat sheet:

O(1) means an operation runs in constant time: it will take the same time to complete regardless of the size of the data structure.

O(n) means an operation runs in linear time: if you double the size of your data structure, the operation will take twice as long to complete; if you quadruple the size, it will take four times as long, etc.

O(log n) means an operation runs in logarithmic time: for log2, if you double the size of your data structure, the operation will take one step longer to complete; if you quadruple the size, it will need two steps more; and so on. However, the data structures in this library generally run in log64 time, meaning you have to make your data structure 64 times bigger to need one extra step, and 4096 times bigger to need two steps. This means that, while they still count as O(log n), operations on all but really large data sets will run at near enough to O(1) that you won’t usually notice.

O(n log n) is the most expensive operation you’ll see in this library: it means that for every one of the n elements in your data structure, you have to perform log n operations. In our case, as noted above, this is often close enough to O(n) that it’s not usually as bad as it sounds, but even O(n) isn’t cheap and the cost still increases logarithmically, if slowly, as the size of your data increases. O(n log n) basically means “are you sure you need to do this?”

O(1)* means ‘amortised O(1),’ which means that an operation usually runs in constant time but will occasionally be more expensive: for instance, Vector::push_back, if called in sequence, will be O(1) most of the time but every 64th time it will be O(log n), as it fills up its tail chunk and needs to insert it into the tree. Please note that the O(1) with the asterisk attached is not a common notation; it’s just a convention I’ve used in these docs to save myself from having to type ‘amortised’ everywhere.

Lists

Lists are sequences of single elements which maintain the order in which you inserted them. The only list in this library is Vector, which offers the best all round performance characteristics: it’s pretty good at everything, even if there’s always another kind of list that’s better at something.

TypeAlgorithmConstraintsOrderPushPopSplitAppendLookup
Vector<A>RRB treeCloneinsertionO(1)*O(1)*O(log n)O(log n)O(log n)

Maps

Maps are mappings of keys to values, where the most common read operation is to find the value associated with a given key. Maps may or may not have a defined order. Any given key can only occur once inside a map, and setting a key to a different value will overwrite the previous value.

TypeAlgorithmKey ConstraintsOrderInsertRemoveLookup
HashMap<K, V>HAMTClone + Hash + EqundefinedO(log n)O(log n)O(log n)
OrdMap<K, V>B-treeClone + OrdsortedO(log n)O(log n)O(log n)

Sets

Sets are collections of unique values, and may or may not have a defined order. Their crucial property is that any given value can only exist once in a given set.

TypeAlgorithmConstraintsOrderInsertRemoveLookup
HashSet<A>HAMTClone + Hash + EqundefinedO(log n)O(log n)O(log n)
OrdSet<A>B-treeClone + OrdsortedO(log n)O(log n)O(log n)

In-place Mutation

All of these data structures support in-place copy-on-write mutation, which means that if you’re the sole user of a data structure, you can update it in place without taking the performance hit of making a copy of the data structure before modifying it (this is about an order of magnitude faster than immutable operations, almost as fast as std::collections’s mutable data structures).

Thanks to Rc’s reference counting, we are able to determine whether a node in a data structure is being shared with other data structures, or whether it’s safe to mutate it in place. When it’s shared, we’ll automatically make a copy of the node before modifying it. The consequence of this is that cloning a data structure becomes a lazy operation: the initial clone is instant, and as you modify the cloned data structure it will clone chunks only where you change them, so that if you change the entire thing you will eventually have performed a full clone.

This also gives us a couple of other optimisations for free: implementations of immutable data structures in other languages often have the idea of local mutation, like Clojure’s transients or Haskell’s ST monad - a managed scope where you can treat an immutable data structure like a mutable one, gaining a considerable amount of performance because you no longer need to copy your changed nodes for every operation, just the first time you hit a node that’s sharing structure. In Rust, we don’t need to think about this kind of managed scope, it’s all taken care of behind the scenes because of our low level access to the garbage collector (which, in our case, is just a simple Rc).

Thread Safety

The data structures in the im crate are thread safe, through Arc. This comes with a slight performance impact, so that if you prioritise speed over thread safety, you may want to use the im-rc crate instead, which is identical to im except that it uses Rc instead of Arc, implying that the data structures in im-rc do not implement Send and Sync. This yields approximately a 20-25% increase in general performance.

Feature Flags

im comes with optional support for the following crates through Cargo feature flags. You can enable them in your Cargo.toml file like this:

[dependencies]
im = { version = "*", features = ["proptest", "serde"] }
FeatureDescription
poolConstructors and pool types for refpool memory pools (only available in im-rc)
proptestStrategies for all im datatypes under a proptest namespace, eg. im::vector::proptest::vector()
quickcheckquickcheck::Arbitrary implementations for all im datatypes (not available in im-rc)
rayonparallel iterator implementations for Vector (not available in im-rc)
serdeSerialize and Deserialize implementations for all im datatypes
arbitraryarbitrary::Arbitrary implementations for all im datatypes

Modules

An unordered map.

An unordered set.

Iterators over immutable data.

An ordered map.

An ordered set.

Proptest strategies.

A persistent vector.

Macros

Get a value inside multiple levels of data structures.

Construct a hash map from a sequence of key/value pairs.

Construct a set from a sequence of values.

Construct a map from a sequence of key/value pairs.

Construct a set from a sequence of values.

Update a value inside multiple levels of data structures.

Construct a vector from a sequence of elements.

Structs

An unordered map.

An unordered set.

An ordered map.

An ordered set.

A persistent vector.