1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
/// Errors and traits to build a command pub mod command; pub use command::*; ///trait to implement HID devices pub mod mock; pub use mock::*; /// This command states the current mode of the device: pub mod bininfo; pub use bininfo::*; ///Compute checksum of a number of pages. Maximum value for num_pages is max_message_size / 2 - 2. The checksum algorithm used is CRC-16-CCITT. pub mod chksumpages; pub use chksumpages::*; ///Return internal log buffer if any. The result is a character array. pub mod dmesg; pub use dmesg::*; /// Various device information. The result is a character array. See INFO_UF2.TXT in UF2 format for details. pub mod info; pub use info::*; ///Read a number of words from memory. Memory is read word by word (and not byte by byte), and target_addr must be suitably aligned. This is to support reading of special IO regions. pub mod readwords; pub use readwords::*; ///Reset the device into user-space app. Usually, no response at all will arrive for this command. pub mod resetintoapp; pub use resetintoapp::*; ///Reset the device into bootloader, usually for flashing. Usually, no response at all will arrive for this command. pub mod resetintobootloader; pub use resetintobootloader::*; /// When issued in bootloader mode, it has no effect. In user-space mode it causes handover to bootloader. A BININFO command can be issued to verify that. pub mod startflash; pub use startflash::*; ///Write a single page of flash memory. No Result. pub mod writeflashpage; pub use writeflashpage::*; ///Dual of READ WORDS, with the same constraints. No Result. pub mod writewords; pub use writewords::*;