Constant gmp_mpfr_sys::C::GMP::Rational_Number_Functions[][src]

pub const Rational_Number_Functions: ();

This constant is a place-holder for documentation; do not use it in code.


6 Rational Number Functions

This chapter describes the GMP functions for performing arithmetic on rational numbers. These functions start with the prefix mpq_.

Rational numbers are stored in objects of type mpq_t.

All rational arithmetic functions assume operands have a canonical form, and canonicalize their result. The canonical form means that the denominator and the numerator have no common factors, and that the denominator is positive. Zero has the unique representation 0/1.

Pure assignment functions do not canonicalize the assigned variable. It is the responsibility of the user to canonicalize the assigned variable before any arithmetic operations are performed on that variable.

Function: void mpq_canonicalize (mpq_t op)

Remove any factors that are common to the numerator and denominator of op, and make the denominator positive.


6.1 Initialization and Assignment Functions

Function: void mpq_init (mpq_t x)

Initialize x and set it to 0/1. Each variable should normally only be initialized once, or at least cleared out (using the function mpq_clear) between each initialization.

Function: void mpq_inits (mpq_t x, ...)

Initialize a NULL-terminated list of mpq_t variables, and set their values to 0/1.

Function: void mpq_clear (mpq_t x)

Free the space occupied by x. Make sure to call this function for all mpq_t variables when you are done with them.

Function: void mpq_clears (mpq_t x, ...)

Free the space occupied by a NULL-terminated list of mpq_t variables.

Function: void mpq_set (mpq_t rop, const mpq_t op)
Function: void mpq_set_z (mpq_t rop, const mpz_t op)

Assign rop from op.

Function: void mpq_set_ui (mpq_t rop, unsigned long int op1, unsigned long int op2)
Function: void mpq_set_si (mpq_t rop, signed long int op1, unsigned long int op2)

Set the value of rop to op1/op2. Note that if op1 and op2 have common factors, rop has to be passed to mpq_canonicalize before any operations are performed on rop.

Function: int mpq_set_str (mpq_t rop, const char *str, int base)

Set rop from a null-terminated string str in the given base.

The string can be an integer like “41” or a fraction like “41/152”. The fraction must be in canonical form (see Rational Number Functions), or if not then mpq_canonicalize must be called.

The numerator and optional denominator are parsed the same as in mpz_set_str (see Assigning Integers). White space is allowed in the string, and is simply ignored. The base can vary from 2 to 62, or if base is 0 then the leading characters are used: 0x or 0X for hex, 0b or 0B for binary, 0 for octal, or decimal otherwise. Note that this is done separately for the numerator and denominator, so for instance 0xEF/100 is 239/100, whereas 0xEF/0x100 is 239/256.

The return value is 0 if the entire string is a valid number, or -1 if not.

Function: void mpq_swap (mpq_t rop1, mpq_t rop2)

Swap the values rop1 and rop2 efficiently.


6.2 Conversion Functions

Function: double mpq_get_d (const mpq_t op)

Convert op to a double, truncating if necessary (i.e. rounding towards zero).

If the exponent from the conversion is too big or too small to fit a double then the result is system dependent. For too big an infinity is returned when available. For too small 0.0 is normally returned. Hardware overflow, underflow and denorm traps may or may not occur.

Function: void mpq_set_d (mpq_t rop, double op)
Function: void mpq_set_f (mpq_t rop, const mpf_t op)

Set rop to the value of op. There is no rounding, this conversion is exact.

Function: char * mpq_get_str (char *str, int base, const mpq_t op)

Convert op to a string of digits in base base. The base argument may vary from 2 to 62 or from -2 to -36. The string will be of the form ‘num/den’, or if the denominator is 1 then just ‘num’.

For base in the range 2..36, digits and lower-case letters are used; for -2..-36, digits and upper-case letters are used; for 37..62, digits, upper-case letters, and lower-case letters (in that significance order) are used.

If str is NULL, the result string is allocated using the current allocation function (see Custom Allocation). The block will be strlen(str)+1 bytes, that being exactly enough for the string and null-terminator.

If str is not NULL, it should point to a block of storage large enough for the result, that being

mpz_sizeinbase (mpq_numref(op), base)
+ mpz_sizeinbase (mpq_denref(op), base) + 3

The three extra bytes are for a possible minus sign, possible slash, and the null-terminator.

A pointer to the result string is returned, being either the allocated block, or the given str.


6.3 Arithmetic Functions

Function: void mpq_add (mpq_t sum, const mpq_t addend1, const mpq_t addend2)

Set sum to addend1 + addend2.

Function: void mpq_sub (mpq_t difference, const mpq_t minuend, const mpq_t subtrahend)

Set difference to minuend - subtrahend.

Function: void mpq_mul (mpq_t product, const mpq_t multiplier, const mpq_t multiplicand)

Set product to multiplier times multiplicand.

Function: void mpq_mul_2exp (mpq_t rop, const mpq_t op1, mp_bitcnt_t op2)

Set rop to op1 times 2 raised to op2.

Function: void mpq_div (mpq_t quotient, const mpq_t dividend, const mpq_t divisor)

Set quotient to dividend/divisor.

Function: void mpq_div_2exp (mpq_t rop, const mpq_t op1, mp_bitcnt_t op2)

Set rop to op1 divided by 2 raised to op2.

Function: void mpq_neg (mpq_t negated_operand, const mpq_t operand)

Set negated_operand to -operand.

Function: void mpq_abs (mpq_t rop, const mpq_t op)

Set rop to the absolute value of op.

Function: void mpq_inv (mpq_t inverted_number, const mpq_t number)

Set inverted_number to 1/number. If the new denominator is zero, this routine will divide by zero.


6.4 Comparison Functions

Function: int mpq_cmp (const mpq_t op1, const mpq_t op2)
Function: int mpq_cmp_z (const mpq_t op1, const mpz_t op2)

Compare op1 and op2. Return a positive value if op1 > op2, zero if op1 = op2, and a negative value if op1 < op2.

To determine if two rationals are equal, mpq_equal is faster than mpq_cmp.

Macro: int mpq_cmp_ui (const mpq_t op1, unsigned long int num2, unsigned long int den2)
Macro: int mpq_cmp_si (const mpq_t op1, long int num2, unsigned long int den2)

Compare op1 and num2/den2. Return a positive value if op1 > num2/den2, zero if op1 = num2/den2, and a negative value if op1 < num2/den2.

num2 and den2 are allowed to have common factors.

These functions are implemented as a macros and evaluate their arguments multiple times.

Macro: int mpq_sgn (const mpq_t op)

Return +1 if op > 0, 0 if op = 0, and -1 if op < 0.

This function is actually implemented as a macro. It evaluates its argument multiple times.

Function: int mpq_equal (const mpq_t op1, const mpq_t op2)

Return non-zero if op1 and op2 are equal, zero if they are non-equal. Although mpq_cmp can be used for the same purpose, this function is much faster.


6.5 Applying Integer Functions to Rationals

The set of mpq functions is quite small. In particular, there are few functions for either input or output. The following functions give direct access to the numerator and denominator of an mpq_t.

Note that if an assignment to the numerator and/or denominator could take an mpq_t out of the canonical form described at the start of this chapter (see Rational Number Functions) then mpq_canonicalize must be called before any other mpq functions are applied to that mpq_t.

Macro: mpz_t mpq_numref (const mpq_t op)
Macro: mpz_t mpq_denref (const mpq_t op)

Return a reference to the numerator and denominator of op, respectively. The mpz functions can be used on the result of these macros.

Function: void mpq_get_num (mpz_t numerator, const mpq_t rational)
Function: void mpq_get_den (mpz_t denominator, const mpq_t rational)
Function: void mpq_set_num (mpq_t rational, const mpz_t numerator)
Function: void mpq_set_den (mpq_t rational, const mpz_t denominator)

Get or set the numerator or denominator of a rational. These functions are equivalent to calling mpz_set with an appropriate mpq_numref or mpq_denref. Direct use of mpq_numref or mpq_denref is recommended instead of these functions.


6.6 Input and Output Functions

Functions that perform input from a stdio stream, and functions that output to a stdio stream, of mpq numbers. Passing a NULL pointer for a stream argument to any of these functions will make them read from stdin and write to stdout, respectively.

When using any of these functions, it is a good idea to include stdio.h before gmp.h, since that will allow gmp.h to define prototypes for these functions.

See also Formatted Output and Formatted Input.

Function: size_t mpq_out_str (FILE *stream, int base, const mpq_t op)

Output op on stdio stream stream, as a string of digits in base base. The base argument may vary from 2 to 62 or from -2 to -36. Output is in the form ‘num/den’ or if the denominator is 1 then just ‘num’.

For base in the range 2..36, digits and lower-case letters are used; for -2..-36, digits and upper-case letters are used; for 37..62, digits, upper-case letters, and lower-case letters (in that significance order) are used.

Return the number of bytes written, or if an error occurred, return 0.

Function: size_t mpq_inp_str (mpq_t rop, FILE *stream, int base)

Read a string of digits from stream and convert them to a rational in rop. Any initial white-space characters are read and discarded. Return the number of characters read (including white space), or 0 if a rational could not be read.

The input can be a fraction like ‘17/63’ or just an integer like ‘123’. Reading stops at the first character not in this form, and white space is not permitted within the string. If the input might not be in canonical form, then mpq_canonicalize must be called (see Rational Number Functions).

The base can be between 2 and 62, or can be 0 in which case the leading characters of the string determine the base, ‘0x’ or ‘0X’ for hexadecimal, 0b and 0B for binary, ‘0’ for octal, or decimal otherwise. The leading characters are examined separately for the numerator and denominator of a fraction, so for instance ‘0x10/11’ is 16/11, whereas ‘0x10/0x11’ is 16/17.