Crate f3 [] [src]

Board support crate for the STM32F3DISCOVERY

Usage

  • Trying out the examples
$ # if you don't have the clone subcommand
$ cargo install cargo-clone

$ cargo clone f3 --vers 0.5.2

# on another terminal
$ openocd -f interface/stlink-v2-1.cfg -f target/stm32f3x.cfg

# flash and debug the "Hello, world" example
$ cd f3
$ xargo run --example hello

You'll need to have both OpenOCD and arm-none-eabi-ld installed.

  • Building an application that depends on this crate

To build applications (binary crates) using this crate follow cortex-m-quickstart instructions and add this crate as a dependency in step number 5 and make sure you enable the "rt" Cargo feature of this crate. Also, instead of step number 3 remove both the build.rs and memory.x files.

Examples

See the examples module.

Reexports

pub extern crate l3gd20;
pub extern crate lsm303dlhc;
pub extern crate stm32f30x_hal as hal;

Modules

examples

Examples

led

On-board user LEDs

Type Definitions

L3gd20

On board L3GD20 connected to the SPI1 bus via the pins PA5, PA6, PA7 and PE3

Lsm303dlhc

On board LSM303DLHC connected to the I2C1 bus via the PB6 and PB7 pins