[−][src]Crate duplicate
This crate provides macros for easy code duplication with substitution:
duplicate: Attribute macro.duplicate_inline: Function-like procedural macro.
The only major difference between the two is where you can use them.
Therefore, the following section presents how to use
duplicate only. Refer to duplicate_inline's documentation for how it
defers from what is specified below.
Usage
Say you have a trait with a method is_max that should return true if the
value of the object is the maximum allowed and false otherwise:
trait IsMax { fn is_max(&self) -> bool; }
You would like to implement this trait for the three integer types u8,
u16, and u32:
impl IsMax for u8 { fn is_max(&self) -> bool { *self == 255 } } impl IsMax for u16 { fn is_max(&self) -> bool { *self == 65_535 } } impl IsMax for u32 { fn is_max(&self) -> bool { *self == 4_294_967_295 } }
This is a lot of repetition. Only the type and the maximum value are
actually different between the three implementations. This might not be much
in our case, but imagine doing this for all the integer types (10, as of the
last count.) We can use the duplicate attribute to avoid repeating
ourselves:
use duplicate::duplicate; #[duplicate( int_type max_value; [ u8 ] [ 255 ]; [ u16 ] [ 65_535 ]; [ u32 ] [ 4_294_967_295 ]; )] impl IsMax for int_type { fn is_max(&self) -> bool { *self == max_value } } assert!(!42u8.is_max()); assert!(!42u16.is_max()); assert!(!42u32.is_max());
The above code will expand to the three implementations before it.
The attribute invocation specifies that the following item should be
substituted by three duplicates of itself. Additionally, each occurrence of
the identifier int_type in the first duplicate should be replaced by u8,
in the second duplicate by u16, and in the last by u32. Likewise, each
occurrence of max_value should be replaced by 255, 65_535, and
4_294_967_295 in the first, second, and third duplicates respectively.
int_type and max_value are called substitution identifiers, while [ u8 ], [ u16 ], and [ u32 ] are each substitutions for int_type and
[255], [65_535], and [4_294_967_295] are substitutions for
max_value. Each pair of substitutions for the identifiers is called a
substitution group. Substitution groups must be seperated by ; and the
number of duplicates made is equal to the number of subsitution groups.
Substitution identifiers must be valid Rust identifiers.
The code inside substitutions can be arbitrary, as long as the expanded code
is valid. Additionally, any "bracket" type is valid; we could have used ()
or {} anywhere [] is used in these examples.
Parameterized Substitution
Say we have a struct that wraps a vector and we want to give
access to the vector's get and get_mut methods directly:
struct VecWrap<T>(Vec<T>); impl<T> VecWrap<T> { pub fn get(&self, idx: usize) -> Option<&T> { self.0.get(idx) } pub fn get_mut(&mut self, idx: usize) -> Option<&mut T> { self.0.get_mut(idx) } } let mut vec = VecWrap(vec![1,2,3]); assert_eq!(*vec.get(0).unwrap(), 1); *vec.get_mut(1).unwrap() = 5; assert_eq!(*vec.get(1).unwrap(), 5);
Even though the implementations of the two versions of get are almost
identical, we will always need to duplicate the code, because Rust cannot be
generic over mutability. Parameterized substitution allows us to pass code
snippets to substitution identifiers to customize the substitution for that
specific use of the identifier. We can use it to help with the
implementation of constant and mutable versions of methods and functions.
The following impl is identical to the above code:
impl<T> VecWrap<T> { #[duplicate( method reference(type); [get] [& type]; [get_mut] [&mut type]; )] pub fn method(self: reference([Self]), idx: usize) -> Option<reference([T])> { self.0.method(idx) } }
In a duplicate invocation, if a substitution identifier is followed by
brackets containing a list of parameters, they can be used in the
substitution. In this example, the reference identifier takes 1 parameter
named type, which is used in the substitutions to create either a shared
reference to the type or a mutable one. When using the reference in the
method declaration, we give it different types as arguments to construct
either shared or mutable references.
E.g. reference([Self]) becomes &Self in the first duplicate and &mut Self in the second. An argument can be any code snippet inside brackets.
A substitution identifier can take any number of parameters. We can use this if we need to also provide the references with a lifetime:
impl<T> VecWrap<T> { #[duplicate( method reference(lifetime, type); [get] [& 'lifetime type]; [get_mut] [& 'lifetime mut type]; )] pub fn method<'a>(self: reference([a],[Self]),idx: usize) -> Option<reference([a],[T])> { self.0.method(idx) } }
Here we pass the lifetime 'a to the substitution as the first argument,
and the type as the second. Notice how the arguments are separated by a
comma. This results in the following code:
impl<T> VecWrap<T> { pub fn get<'a>(self: &'a Self, idx: usize) -> Option<&'a T> { self.0.get(idx) } pub fn get_mut<'a>(self: &'a mut Self, idx: usize) -> Option<&'a mut T> { self.0.get_mut(idx) } }
Notice also the way we pass lifetimes to identifiers: reference([a], [Self]). The lifetime is passed without the ' prefix, which is instead
present in the substitution before the lifetime: [& 'lifetime type].
This is because the rust syntax disallows lifetimes in brackets on their
own. Our solution is therefore a hacking of the system and not a property of
duplicate itself.
Nested Invocation
Imagine we have the following trait with the method is_negative that
should return true if the value of the object is negative and false
otherwise:
trait IsNegative { fn is_negative(&self) -> bool; }
We want to implement this for the six integer types u8, u16, u32,
i8, i16, and i32. For the first three types, which are all unsigned,
the implementation of this trait should trivially return false as they
can't be negative. However, for the remaining, signed types their
implementations is identical (checking whether they are less than 0), but,
of course, different from the first three:
impl IsNegative for u8 { fn is_negative(&self) -> bool { false } } impl IsNegative for u16 { fn is_negative(&self) -> bool { false } } impl IsNegative for u32 { fn is_negative(&self) -> bool { false } } impl IsNegative for i8 { fn is_negative(&self) -> bool { *self < 0 } } impl IsNegative for i16 { fn is_negative(&self) -> bool { *self < 0 } } impl IsNegative for i32 { fn is_negative(&self) -> bool { *self < 0 } }
Notice how the code repetition is split over 2 axes: 1) They all implement the same trait 2) the method implementations of the first 3 are identical to each other but different to the next 3, which are also mutually identical. To implement this using only the syntax we have already seen, we could do something like this:
#[duplicate( int_type implementation; [u8] [false]; [u16] [false]; [u32] [false]; [i8] [*self < 0]; [i16] [*self < 0]; [i32] [*self < 0] )] impl IsNegative for int_type { fn is_negative(&self) -> bool { implementation } } assert!(!42u8.is_negative()); assert!(!42u16.is_negative()); assert!(!42u32.is_negative()); assert!(!42i8.is_negative()); assert!(!42i16.is_negative()); assert!(!42i32.is_negative());
However, ironically, we here had to repeat ourselves in the macro invocation
instead of the code: we needed to repeat the implementations [ false ] and
[ *self < 0 ] three times each. We can utilize nested invocation to
remove the last bit of repetition:
#[duplicate(
int_type implementation;
#[
int_type_nested; [u8]; [u16]; [u32]
][
[ int_type_nested ] [ false ];
]
#[
int_type_nested; [i8]; [i16]; [i32]
][
[ int_type_nested ] [ *self < 0 ];
]
)]
impl IsNegative for int_type {
fn is_negative(&self) -> bool {
implementation
}
}
assert!(!42u8.is_negative());
assert!(!42u16.is_negative());
assert!(!42u32.is_negative());
assert!(!42i8.is_negative());
assert!(!42i16.is_negative());
assert!(!42i32.is_negative());We use # to invoke the macro inside itself, producing duplicates
of the code inside the following [], {}, or ().
In our example, we have 2 invocations that each produce 3 substitution
groups, inserting the correct implementation for their signed or unsigned
types. The above nested invocation is equivalent to the previous, non-nested
invocation, and actually expands to it as an intermediate step before
expanding the outer-most invocation.
Deeper levels of nested invocation are possible and work as expected. There is no limit on the depth of nesting, however, as might be clear from our example, it can get complicated to read.
Lastly, we should note that we can have nested invocations interleaved with
normal substution groups. For example, say we want to implement IsNegative
for i8, but don't want the same for i16 and i32. We could do the
following:
#[duplicate(
int_type implementation;
#[ // -+
int_type_nested; [u8]; [u16]; [u32] // | Nested invocation producing 3
][ // | substitution groups
[int_type_nested ] [ false ]; // |
] // -+
[ i8 ] [ *self < 0 ] // -- Substitution group 4
)]
impl IsNegative for int_type {
fn is_negative(&self) -> bool {
implementation
}
}
Note that nested invocation is only allowed after the initial list of
substitution identifiers. You also cannot use it between individual
subtitutions in a group, only between whole substitution groups.
Lastly, remember that substitution groups must be seperated by ;, which
means the nested invocation must produce these semi-colons explicitly and
correctly.
Verbose Syntax
The syntax used in the previous examples is the short syntax.
duplicate also accepts a verbose syntax that is less concise, but more
readable in some circumstances. Using the verbose syntax, the very first
example above looks like this:
use duplicate::duplicate; #[duplicate( [ int_type [ u8 ] max_value [ 255 ] ] [ int_type [ u16 ] max_value [ 65_535 ] ] [ int_type [ u32 ] max_value [ 4_294_967_295 ] ] )] impl IsMax for int_type { fn is_max(&self) -> bool { *self == max_value } }
In the verbose syntax, a substitution group is put inside brackets and
includes a list of substitution identifiers followed by their substitutions.
No ;s are needed. Here is an annotated version of the same code:
#[duplicate( [ //-+ int_type [ u8 ] // | Substitution group 1 max_value [ 255 ] // | // ^^^^^^^^^ ^^^^^^^ substitution | // | | // substitution identifier | ] //-+ [ //-+ int_type [ u16 ] // | Substitution group 2 max_value [ 65_535 ] // | ] //-+ [ //-+ max_value [ 4_294_967_295 ] // | Substitution group 3 int_type [ u32 ] // | ] //-+ )]
Note that in each substitution group every identifier must have exactly one
substitution. All the groups must have the exact same identifiers, though
the order in which they arrive in each group is not important. For example,
in the annotated example, the third group has the max_value identifier
before int_type without having any effect on the expanded code.
The verbose syntax is not very concise but it has some advantages over the short syntax in regards to readability. Using many identifiers and long substitutions can quickly become unwieldy in the short syntax. The verbose syntax deals better with both cases as it will grow horizontally instead of vertically.
The verbose syntax does not currently support parameterized substitution. It is planned to be added to this syntax in a future update.
The verbose syntax does offer nested invocation. The syntax is exactly the
same, but since there is no initial substitution identifier list, nested
calls can be used anywhere (though still not inside substitution groups.)
The previous IsNegative nested invocation example can be written as
follows:
#[duplicate(
#[
int_type_nested; [u8]; [u16]; [u32]
][
[
int_type [ int_type_nested ]
implementation [ false ]
]
]
#[
int_type_nested; [i8]; [i16]; [i32]
][
[
int_type [ int_type_nested ]
implementation [ *self < 0 ]
]
]
)]
impl IsNegative for int_type {
fn is_negative(&self) -> bool {
implementation
}
}
assert!(!42u8.is_negative());
assert!(!42u16.is_negative());
assert!(!42u32.is_negative());
assert!(!42i8.is_negative());
assert!(!42i16.is_negative());
assert!(!42i32.is_negative());It's important to notice that the nested invocation doesn't know it
isn't the outer-most invocation and therefore doesn't discriminate between
identifiers. We had to use a different identifier in the nested invocations
(int_type_nested) than in the code (int_type), because otherwise the
nested invocation would substitute the substitution identifier too, instead
of only substituting in the nested invocation's substitute.
Nested invocations must produce the syntax of their parent invocation. However, each invocation's private syntax is free to use any syntax type. Notice in our above example, the nested invocations use short syntax but produce verbose syntax for the outer-most invocation.
Crate Features
module_disambiguation
Implicit Module Name Disambiguation (Enabled by default)
It is sometime beneficial to apply duplicate to a module, such that all
its contents are duplicated at once. However, this will always need the
resulting modules to have unique names to avoid the compiler issueing an
error. Without module_disambiguation, module names must be substituted
manually. With module_disambiguation, the following will compile
successfully:
#[duplicate( int_type max_value; [ u8 ] [ 255 ]; [ u16 ] [ 65_535 ]; [ u32 ] [ 4_294_967_295 ]; )] mod module { impl IsMax for int_type { fn is_max(&self) -> bool { *self == max_value } } impl IsNegative for int_type { fn is_negative(&self) -> bool { false } } } assert!(!42u8.is_max()); assert!(!42u16.is_max()); assert!(!42u32.is_max()); assert!(!42u8.is_negative()); assert!(!42u16.is_negative()); assert!(!42u32.is_negative());
This works because the three duplicate modules get assigned unique names:
module_u_8, module_u_16, and module_u_32. This only works if a
substitution identifier can be found, where all its substitutions only
produce a single identifier and nothing else. Those identifiers are then
converted to snake case, and postfixed to the original module's name,
e.g., module + u8 = module_u_8. The first suitable substitution
identifier is chosen.
pretty_errors
More Detailed Error Messages (Enabled by default)
Enabling this feature will make error messages indicate exactly where the offending code is. Without this feature, error messages will not provide detailed location indicators for errors.
This feature is has no effect on expansion. Therefore, libraries are advised to keep this feature off (note that it's enabled by default) to avoid forcing it on users.
Disclaimer
This crate does not try to justify or condone the usage of code duplication instead of proper abstractions. This macro should only be used where it is not possible to reduce code duplication through other means, or where it simply is not worth it.
As an example, libraries that have two or more structs/traits with similar APIs might use this macro to test them without having to copy-paste test cases and manually make the needed edits.
Macros
| duplicate_inline | Duplicates the given code and substitutes specific identifiers for different code snippets in each duplicate. |
Attribute Macros
| duplicate | Duplicates the item it is applied to and substitutes specific identifiers for different code snippets in each duplicate. |