Struct bstr::BStr

pub struct BStr { /* fields omitted */ }

A wrapper for &[u8] that provides convenient string oriented trait impls.

If you need ownership or a growable byte string buffer, then use BString.

Using a &BStr is just like using a &[u8], since BStr implements Deref to [u8]. So all methods available on [u8] are also available on BStr.

Representation

A &BStr has the same representation as a &str. That is, a &BStr is a fat pointer which consists of a pointer to some bytes and a length.

Trait implementations

The BStr type has a number of trait implementations, and in particular, defines equality and ordinal comparisons between &BStr, &str and &[u8] for convenience.

The Debug implementation for BStr shows its bytes as a normal string. For invalid UTF-8, hex escape sequences are used.

The Display implementation behaves as if BStr were first lossily converted to a str. Invalid UTF-8 bytes are substituted with the Unicode replacement codepoint, which looks like this: �.

Trait Implementations

impl<'a> From<&'a BStr> for BString

fn from(s: &'a BStr) -> BString

Performs the conversion.

impl<'a> From<&'a [u8]> for &'a BStr

fn from(s: &'a [u8]) -> &'a BStr

Performs the conversion.

impl<'a> From<&'a str> for &'a BStr

fn from(s: &'a str) -> &'a BStr

Performs the conversion.

impl<'a> From<&'a BStr> for Cow<'a, BStr>

fn from(s: &'a BStr) -> Cow<'a, BStr>

Performs the conversion.

impl Ord for BStr

fn cmp(&self, other: &BStr) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl AsMut<BStr> for BString

fn as_mut(&mut self) -> &mut BStr

Performs the conversion.

impl AsMut<[u8]> for BStr

fn as_mut(&mut self) -> &mut [u8]

Performs the conversion.

impl AsMut<BStr> for [u8]

fn as_mut(&mut self) -> &mut BStr

Performs the conversion.

impl<'a, 'b> PartialOrd<BStr> for BString

fn partial_cmp(&self, other: &BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<BString> for BStr

fn partial_cmp(&self, other: &BString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<&'a BStr> for BString

fn partial_cmp(&self, other: &&'a BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<BString> for &'a BStr

fn partial_cmp(&self, other: &BString) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<BStr> for BStr

fn partial_cmp(&self, other: &BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<[u8]> for BStr

fn partial_cmp(&self, other: &[u8]) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<BStr> for [u8]

fn partial_cmp(&self, other: &BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<&'a [u8]> for BStr

fn partial_cmp(&self, other: &&'a [u8]) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<BStr> for &'a [u8]

fn partial_cmp(&self, other: &BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<str> for BStr

fn partial_cmp(&self, other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<BStr> for str

fn partial_cmp(&self, other: &BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<&'a str> for BStr

fn partial_cmp(&self, other: &&'a str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<BStr> for &'a str

fn partial_cmp(&self, other: &BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<Vec<u8>> for BStr

fn partial_cmp(&self, other: &Vec<u8>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<BStr> for Vec<u8>

fn partial_cmp(&self, other: &BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<Vec<u8>> for &'a BStr

fn partial_cmp(&self, other: &Vec<u8>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<&'a BStr> for Vec<u8>

fn partial_cmp(&self, other: &&'a BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<String> for BStr

fn partial_cmp(&self, other: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<BStr> for String

fn partial_cmp(&self, other: &BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<String> for &'a BStr

fn partial_cmp(&self, other: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialOrd<&'a BStr> for String

fn partial_cmp(&self, other: &&'a BStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> PartialEq<BStr> for BString

fn eq(&self, other: &BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<BString> for BStr

fn eq(&self, other: &BString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<&'a BStr> for BString

fn eq(&self, other: &&'a BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<BString> for &'a BStr

fn eq(&self, other: &BString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<BStr> for BStr

fn eq(&self, other: &BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<[u8]> for BStr

fn eq(&self, other: &[u8]) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<BStr> for [u8]

fn eq(&self, other: &BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<&'a [u8]> for BStr

fn eq(&self, other: &&'a [u8]) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<BStr> for &'a [u8]

fn eq(&self, other: &BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<str> for BStr

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<BStr> for str

fn eq(&self, other: &BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<&'a str> for BStr

fn eq(&self, other: &&'a str) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<BStr> for &'a str

fn eq(&self, other: &BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<Vec<u8>> for BStr

fn eq(&self, other: &Vec<u8>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<BStr> for Vec<u8>

fn eq(&self, other: &BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<Vec<u8>> for &'a BStr

fn eq(&self, other: &Vec<u8>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<&'a BStr> for Vec<u8>

fn eq(&self, other: &&'a BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<String> for BStr

fn eq(&self, other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<BStr> for String

fn eq(&self, other: &BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<String> for &'a BStr

fn eq(&self, other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<&'a BStr> for String

fn eq(&self, other: &&'a BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<Cow<'a, BStr>> for &'a BStr

fn eq(&self, other: &Cow<'a, BStr>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<&'a BStr> for Cow<'a, BStr>

fn eq(&self, other: &&'a BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<Cow<'a, str>> for &'a BStr

fn eq(&self, other: &Cow<'a, str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<&'a BStr> for Cow<'a, str>

fn eq(&self, other: &&'a BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<Cow<'a, [u8]>> for &'a BStr

fn eq(&self, other: &Cow<'a, [u8]>) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<&'a BStr> for Cow<'a, [u8]>

fn eq(&self, other: &&'a BStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a> Default for &'a BStr

fn default() -> &'a BStr

Returns the "default value" for a type.

impl<'a> Default for &'a mut BStr

fn default() -> &'a mut BStr

Returns the "default value" for a type.

impl ToOwned for BStr

type Owned = BString

The resulting type after obtaining ownership.

fn to_owned(&self) -> BString

Creates owned data from borrowed data, usually by cloning.

fn clone_into(&self, target: &mut Self::Owned)

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning.

impl Eq for BStr

impl AsRef<BStr> for BString

fn as_ref(&self) -> &BStr

Performs the conversion.

impl AsRef<[u8]> for BStr

fn as_ref(&self) -> &[u8]

Performs the conversion.

impl AsRef<BStr> for [u8]

fn as_ref(&self) -> &BStr

Performs the conversion.

impl AsRef<BStr> for str

fn as_ref(&self) -> &BStr

Performs the conversion.

impl DerefMut for BStr

fn deref_mut(&mut self) -> &mut [u8]

Mutably dereferences the value.

impl Deref for BStr

type Target = [u8]

The resulting type after dereferencing.

fn deref(&self) -> &[u8]

Dereferences the value.

impl Display for BStr

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Debug for BStr

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Index<usize> for BStr

type Output = u8

The returned type after indexing.

fn index(&self, idx: usize) -> &u8

Performs the indexing (container[index]) operation.

impl Index<RangeFull> for BStr

type Output = BStr

The returned type after indexing.

fn index(&self, _: RangeFull) -> &BStr

Performs the indexing (container[index]) operation.

impl Index<Range<usize>> for BStr

type Output = BStr

The returned type after indexing.

fn index(&self, r: Range<usize>) -> &BStr

Performs the indexing (container[index]) operation.

impl Index<RangeInclusive<usize>> for BStr

type Output = BStr

The returned type after indexing.

fn index(&self, r: RangeInclusive<usize>) -> &BStr

Performs the indexing (container[index]) operation.

impl Index<RangeFrom<usize>> for BStr

type Output = BStr

The returned type after indexing.

fn index(&self, r: RangeFrom<usize>) -> &BStr

Performs the indexing (container[index]) operation.

impl Index<RangeTo<usize>> for BStr

type Output = BStr

The returned type after indexing.

fn index(&self, r: RangeTo<usize>) -> &BStr

Performs the indexing (container[index]) operation.

impl Index<RangeToInclusive<usize>> for BStr

type Output = BStr

The returned type after indexing.

fn index(&self, r: RangeToInclusive<usize>) -> &BStr

Performs the indexing (container[index]) operation.

impl IndexMut<usize> for BStr

fn index_mut(&mut self, idx: usize) -> &mut u8

Performs the mutable indexing (container[index]) operation.

impl IndexMut<RangeFull> for BStr

fn index_mut(&mut self, _: RangeFull) -> &mut BStr

Performs the mutable indexing (container[index]) operation.

impl IndexMut<Range<usize>> for BStr

fn index_mut(&mut self, r: Range<usize>) -> &mut BStr

Performs the mutable indexing (container[index]) operation.

impl IndexMut<RangeInclusive<usize>> for BStr

fn index_mut(&mut self, r: RangeInclusive<usize>) -> &mut BStr

Performs the mutable indexing (container[index]) operation.

impl IndexMut<RangeFrom<usize>> for BStr

fn index_mut(&mut self, r: RangeFrom<usize>) -> &mut BStr

Performs the mutable indexing (container[index]) operation.

impl IndexMut<RangeTo<usize>> for BStr

fn index_mut(&mut self, r: RangeTo<usize>) -> &mut BStr

Performs the mutable indexing (container[index]) operation.

impl IndexMut<RangeToInclusive<usize>> for BStr

fn index_mut(&mut self, r: RangeToInclusive<usize>) -> &mut BStr

Performs the mutable indexing (container[index]) operation.

impl Hash for BStr

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<'a> FromIterator<&'a BStr> for BString

fn from_iter<T: IntoIterator<Item = &'a BStr>>(iter: T) -> BString

Creates a value from an iterator.

impl Borrow<BStr> for BString

fn borrow(&self) -> &BStr

Immutably borrows from an owned value.