// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::create_association::_create_association_input::CreateAssociationInputBuilder;
pub use crate::operation::create_association::_create_association_output::CreateAssociationOutputBuilder;
impl crate::operation::create_association::builders::CreateAssociationInputBuilder {
/// Sends a request with this input using the given client.
pub async fn send_with(
self,
client: &crate::Client,
) -> ::std::result::Result<
crate::operation::create_association::CreateAssociationOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::create_association::CreateAssociationError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let mut fluent_builder = client.create_association();
fluent_builder.inner = self;
fluent_builder.send().await
}
}
/// Fluent builder constructing a request to `CreateAssociation`.
///
/// <p>A State Manager association defines the state that you want to maintain on your managed nodes. For example, an association can specify that anti-virus software must be installed and running on your managed nodes, or that certain ports must be closed. For static targets, the association specifies a schedule for when the configuration is reapplied. For dynamic targets, such as an Amazon Web Services resource group or an Amazon Web Services autoscaling group, State Manager, a tool in Amazon Web Services Systems Manager applies the configuration when new managed nodes are added to the group. The association also specifies actions to take when applying the configuration. For example, an association for anti-virus software might run once a day. If the software isn't installed, then State Manager installs it. If the software is installed, but the service isn't running, then the association might instruct State Manager to start the service.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct CreateAssociationFluentBuilder {
handle: ::std::sync::Arc<crate::client::Handle>,
inner: crate::operation::create_association::builders::CreateAssociationInputBuilder,
config_override: ::std::option::Option<crate::config::Builder>,
}
impl
crate::client::customize::internal::CustomizableSend<
crate::operation::create_association::CreateAssociationOutput,
crate::operation::create_association::CreateAssociationError,
> for CreateAssociationFluentBuilder
{
fn send(
self,
config_override: crate::config::Builder,
) -> crate::client::customize::internal::BoxFuture<
crate::client::customize::internal::SendResult<
crate::operation::create_association::CreateAssociationOutput,
crate::operation::create_association::CreateAssociationError,
>,
> {
::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
}
}
impl CreateAssociationFluentBuilder {
/// Creates a new `CreateAssociationFluentBuilder`.
pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
Self {
handle,
inner: ::std::default::Default::default(),
config_override: ::std::option::Option::None,
}
}
/// Access the CreateAssociation as a reference.
pub fn as_input(&self) -> &crate::operation::create_association::builders::CreateAssociationInputBuilder {
&self.inner
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> ::std::result::Result<
crate::operation::create_association::CreateAssociationOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::create_association::CreateAssociationError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let input = self
.inner
.build()
.map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
let runtime_plugins = crate::operation::create_association::CreateAssociation::operation_runtime_plugins(
self.handle.runtime_plugins.clone(),
&self.handle.conf,
self.config_override,
);
crate::operation::create_association::CreateAssociation::orchestrate(&runtime_plugins, input).await
}
/// Consumes this builder, creating a customizable operation that can be modified before being sent.
pub fn customize(
self,
) -> crate::client::customize::CustomizableOperation<
crate::operation::create_association::CreateAssociationOutput,
crate::operation::create_association::CreateAssociationError,
Self,
> {
crate::client::customize::CustomizableOperation::new(self)
}
pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
self.set_config_override(::std::option::Option::Some(config_override.into()));
self
}
pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
self.config_override = config_override;
self
}
/// <p>The name of the SSM Command document or Automation runbook that contains the configuration information for the managed node.</p>
/// <p>You can specify Amazon Web Services-predefined documents, documents you created, or a document that is shared with you from another Amazon Web Services account.</p>
/// <p>For Systems Manager documents (SSM documents) that are shared with you from other Amazon Web Services accounts, you must specify the complete SSM document ARN, in the following format:</p>
/// <p><code>arn:<i>partition</i>:ssm:<i>region</i>:<i>account-id</i>:document/<i>document-name</i> </code></p>
/// <p>For example:</p>
/// <p><code>arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document</code></p>
/// <p>For Amazon Web Services-predefined documents and SSM documents you created in your account, you only need to specify the document name. For example, <code>AWS-ApplyPatchBaseline</code> or <code>My-Document</code>.</p>
pub fn name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.name(input.into());
self
}
/// <p>The name of the SSM Command document or Automation runbook that contains the configuration information for the managed node.</p>
/// <p>You can specify Amazon Web Services-predefined documents, documents you created, or a document that is shared with you from another Amazon Web Services account.</p>
/// <p>For Systems Manager documents (SSM documents) that are shared with you from other Amazon Web Services accounts, you must specify the complete SSM document ARN, in the following format:</p>
/// <p><code>arn:<i>partition</i>:ssm:<i>region</i>:<i>account-id</i>:document/<i>document-name</i> </code></p>
/// <p>For example:</p>
/// <p><code>arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document</code></p>
/// <p>For Amazon Web Services-predefined documents and SSM documents you created in your account, you only need to specify the document name. For example, <code>AWS-ApplyPatchBaseline</code> or <code>My-Document</code>.</p>
pub fn set_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_name(input);
self
}
/// <p>The name of the SSM Command document or Automation runbook that contains the configuration information for the managed node.</p>
/// <p>You can specify Amazon Web Services-predefined documents, documents you created, or a document that is shared with you from another Amazon Web Services account.</p>
/// <p>For Systems Manager documents (SSM documents) that are shared with you from other Amazon Web Services accounts, you must specify the complete SSM document ARN, in the following format:</p>
/// <p><code>arn:<i>partition</i>:ssm:<i>region</i>:<i>account-id</i>:document/<i>document-name</i> </code></p>
/// <p>For example:</p>
/// <p><code>arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document</code></p>
/// <p>For Amazon Web Services-predefined documents and SSM documents you created in your account, you only need to specify the document name. For example, <code>AWS-ApplyPatchBaseline</code> or <code>My-Document</code>.</p>
pub fn get_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_name()
}
/// <p>The document version you want to associate with the targets. Can be a specific version or the default version.</p><important>
/// <p>State Manager doesn't support running associations that use a new version of a document if that document is shared from another account. State Manager always runs the <code>default</code> version of a document if shared from another account, even though the Systems Manager console shows that a new version was processed. If you want to run an association using a new version of a document shared form another account, you must set the document version to <code>default</code>.</p>
/// </important>
pub fn document_version(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.document_version(input.into());
self
}
/// <p>The document version you want to associate with the targets. Can be a specific version or the default version.</p><important>
/// <p>State Manager doesn't support running associations that use a new version of a document if that document is shared from another account. State Manager always runs the <code>default</code> version of a document if shared from another account, even though the Systems Manager console shows that a new version was processed. If you want to run an association using a new version of a document shared form another account, you must set the document version to <code>default</code>.</p>
/// </important>
pub fn set_document_version(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_document_version(input);
self
}
/// <p>The document version you want to associate with the targets. Can be a specific version or the default version.</p><important>
/// <p>State Manager doesn't support running associations that use a new version of a document if that document is shared from another account. State Manager always runs the <code>default</code> version of a document if shared from another account, even though the Systems Manager console shows that a new version was processed. If you want to run an association using a new version of a document shared form another account, you must set the document version to <code>default</code>.</p>
/// </important>
pub fn get_document_version(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_document_version()
}
/// <p>The managed node ID.</p><note>
/// <p><code>InstanceId</code> has been deprecated. To specify a managed node ID for an association, use the <code>Targets</code> parameter. Requests that include the parameter <code>InstanceID</code> with Systems Manager documents (SSM documents) that use schema version 2.0 or later will fail. In addition, if you use the parameter <code>InstanceId</code>, you can't use the parameters <code>AssociationName</code>, <code>DocumentVersion</code>, <code>MaxErrors</code>, <code>MaxConcurrency</code>, <code>OutputLocation</code>, or <code>ScheduleExpression</code>. To use these parameters, you must use the <code>Targets</code> parameter.</p>
/// </note>
pub fn instance_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.instance_id(input.into());
self
}
/// <p>The managed node ID.</p><note>
/// <p><code>InstanceId</code> has been deprecated. To specify a managed node ID for an association, use the <code>Targets</code> parameter. Requests that include the parameter <code>InstanceID</code> with Systems Manager documents (SSM documents) that use schema version 2.0 or later will fail. In addition, if you use the parameter <code>InstanceId</code>, you can't use the parameters <code>AssociationName</code>, <code>DocumentVersion</code>, <code>MaxErrors</code>, <code>MaxConcurrency</code>, <code>OutputLocation</code>, or <code>ScheduleExpression</code>. To use these parameters, you must use the <code>Targets</code> parameter.</p>
/// </note>
pub fn set_instance_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_instance_id(input);
self
}
/// <p>The managed node ID.</p><note>
/// <p><code>InstanceId</code> has been deprecated. To specify a managed node ID for an association, use the <code>Targets</code> parameter. Requests that include the parameter <code>InstanceID</code> with Systems Manager documents (SSM documents) that use schema version 2.0 or later will fail. In addition, if you use the parameter <code>InstanceId</code>, you can't use the parameters <code>AssociationName</code>, <code>DocumentVersion</code>, <code>MaxErrors</code>, <code>MaxConcurrency</code>, <code>OutputLocation</code>, or <code>ScheduleExpression</code>. To use these parameters, you must use the <code>Targets</code> parameter.</p>
/// </note>
pub fn get_instance_id(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_instance_id()
}
///
/// Adds a key-value pair to `Parameters`.
///
/// To override the contents of this collection use [`set_parameters`](Self::set_parameters).
///
/// <p>The parameters for the runtime configuration of the document.</p>
pub fn parameters(mut self, k: impl ::std::convert::Into<::std::string::String>, v: ::std::vec::Vec<::std::string::String>) -> Self {
self.inner = self.inner.parameters(k.into(), v);
self
}
/// <p>The parameters for the runtime configuration of the document.</p>
pub fn set_parameters(
mut self,
input: ::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::vec::Vec<::std::string::String>>>,
) -> Self {
self.inner = self.inner.set_parameters(input);
self
}
/// <p>The parameters for the runtime configuration of the document.</p>
pub fn get_parameters(
&self,
) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::vec::Vec<::std::string::String>>> {
self.inner.get_parameters()
}
///
/// Appends an item to `Targets`.
///
/// To override the contents of this collection use [`set_targets`](Self::set_targets).
///
/// <p>The targets for the association. You can target managed nodes by using tags, Amazon Web Services resource groups, all managed nodes in an Amazon Web Services account, or individual managed node IDs. You can target all managed nodes in an Amazon Web Services account by specifying the <code>InstanceIds</code> key with a value of <code>*</code>. For more information about choosing targets for an association, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-state-manager-targets-and-rate-controls.html">Understanding targets and rate controls in State Manager associations</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn targets(mut self, input: crate::types::Target) -> Self {
self.inner = self.inner.targets(input);
self
}
/// <p>The targets for the association. You can target managed nodes by using tags, Amazon Web Services resource groups, all managed nodes in an Amazon Web Services account, or individual managed node IDs. You can target all managed nodes in an Amazon Web Services account by specifying the <code>InstanceIds</code> key with a value of <code>*</code>. For more information about choosing targets for an association, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-state-manager-targets-and-rate-controls.html">Understanding targets and rate controls in State Manager associations</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn set_targets(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Target>>) -> Self {
self.inner = self.inner.set_targets(input);
self
}
/// <p>The targets for the association. You can target managed nodes by using tags, Amazon Web Services resource groups, all managed nodes in an Amazon Web Services account, or individual managed node IDs. You can target all managed nodes in an Amazon Web Services account by specifying the <code>InstanceIds</code> key with a value of <code>*</code>. For more information about choosing targets for an association, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-state-manager-targets-and-rate-controls.html">Understanding targets and rate controls in State Manager associations</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn get_targets(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Target>> {
self.inner.get_targets()
}
/// <p>A cron expression when the association will be applied to the targets.</p>
pub fn schedule_expression(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.schedule_expression(input.into());
self
}
/// <p>A cron expression when the association will be applied to the targets.</p>
pub fn set_schedule_expression(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_schedule_expression(input);
self
}
/// <p>A cron expression when the association will be applied to the targets.</p>
pub fn get_schedule_expression(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_schedule_expression()
}
/// <p>An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.</p>
pub fn output_location(mut self, input: crate::types::InstanceAssociationOutputLocation) -> Self {
self.inner = self.inner.output_location(input);
self
}
/// <p>An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.</p>
pub fn set_output_location(mut self, input: ::std::option::Option<crate::types::InstanceAssociationOutputLocation>) -> Self {
self.inner = self.inner.set_output_location(input);
self
}
/// <p>An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.</p>
pub fn get_output_location(&self) -> &::std::option::Option<crate::types::InstanceAssociationOutputLocation> {
self.inner.get_output_location()
}
/// <p>Specify a descriptive name for the association.</p>
pub fn association_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.association_name(input.into());
self
}
/// <p>Specify a descriptive name for the association.</p>
pub fn set_association_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_association_name(input);
self
}
/// <p>Specify a descriptive name for the association.</p>
pub fn get_association_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_association_name()
}
/// <p>Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a tool in Amazon Web Services Systems Manager.</p>
pub fn automation_target_parameter_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.automation_target_parameter_name(input.into());
self
}
/// <p>Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a tool in Amazon Web Services Systems Manager.</p>
pub fn set_automation_target_parameter_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_automation_target_parameter_name(input);
self
}
/// <p>Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a tool in Amazon Web Services Systems Manager.</p>
pub fn get_automation_target_parameter_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_automation_target_parameter_name()
}
/// <p>The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set <code>MaxError</code> to 10%, then the system stops sending the request when the sixth error is received.</p>
/// <p>Executions that are already running an association when <code>MaxErrors</code> is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set <code>MaxConcurrency</code> to 1 so that executions proceed one at a time.</p>
pub fn max_errors(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.max_errors(input.into());
self
}
/// <p>The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set <code>MaxError</code> to 10%, then the system stops sending the request when the sixth error is received.</p>
/// <p>Executions that are already running an association when <code>MaxErrors</code> is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set <code>MaxConcurrency</code> to 1 so that executions proceed one at a time.</p>
pub fn set_max_errors(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_max_errors(input);
self
}
/// <p>The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set <code>MaxError</code> to 10%, then the system stops sending the request when the sixth error is received.</p>
/// <p>Executions that are already running an association when <code>MaxErrors</code> is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set <code>MaxConcurrency</code> to 1 so that executions proceed one at a time.</p>
pub fn get_max_errors(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_max_errors()
}
/// <p>The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.</p>
/// <p>If a new managed node starts and attempts to run an association while Systems Manager is running <code>MaxConcurrency</code> associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for <code>MaxConcurrency</code>.</p>
pub fn max_concurrency(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.max_concurrency(input.into());
self
}
/// <p>The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.</p>
/// <p>If a new managed node starts and attempts to run an association while Systems Manager is running <code>MaxConcurrency</code> associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for <code>MaxConcurrency</code>.</p>
pub fn set_max_concurrency(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_max_concurrency(input);
self
}
/// <p>The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.</p>
/// <p>If a new managed node starts and attempts to run an association while Systems Manager is running <code>MaxConcurrency</code> associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for <code>MaxConcurrency</code>.</p>
pub fn get_max_concurrency(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_max_concurrency()
}
/// <p>The severity level to assign to the association.</p>
pub fn compliance_severity(mut self, input: crate::types::AssociationComplianceSeverity) -> Self {
self.inner = self.inner.compliance_severity(input);
self
}
/// <p>The severity level to assign to the association.</p>
pub fn set_compliance_severity(mut self, input: ::std::option::Option<crate::types::AssociationComplianceSeverity>) -> Self {
self.inner = self.inner.set_compliance_severity(input);
self
}
/// <p>The severity level to assign to the association.</p>
pub fn get_compliance_severity(&self) -> &::std::option::Option<crate::types::AssociationComplianceSeverity> {
self.inner.get_compliance_severity()
}
/// <p>The mode for generating association compliance. You can specify <code>AUTO</code> or <code>MANUAL</code>. In <code>AUTO</code> mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is <code>COMPLIANT</code>. If the association execution doesn't run successfully, the association is <code>NON-COMPLIANT</code>.</p>
/// <p>In <code>MANUAL</code> mode, you must specify the <code>AssociationId</code> as a parameter for the <code>PutComplianceItems</code> API operation. In this case, compliance data isn't managed by State Manager. It is managed by your direct call to the <code>PutComplianceItems</code> API operation.</p>
/// <p>By default, all associations use <code>AUTO</code> mode.</p>
pub fn sync_compliance(mut self, input: crate::types::AssociationSyncCompliance) -> Self {
self.inner = self.inner.sync_compliance(input);
self
}
/// <p>The mode for generating association compliance. You can specify <code>AUTO</code> or <code>MANUAL</code>. In <code>AUTO</code> mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is <code>COMPLIANT</code>. If the association execution doesn't run successfully, the association is <code>NON-COMPLIANT</code>.</p>
/// <p>In <code>MANUAL</code> mode, you must specify the <code>AssociationId</code> as a parameter for the <code>PutComplianceItems</code> API operation. In this case, compliance data isn't managed by State Manager. It is managed by your direct call to the <code>PutComplianceItems</code> API operation.</p>
/// <p>By default, all associations use <code>AUTO</code> mode.</p>
pub fn set_sync_compliance(mut self, input: ::std::option::Option<crate::types::AssociationSyncCompliance>) -> Self {
self.inner = self.inner.set_sync_compliance(input);
self
}
/// <p>The mode for generating association compliance. You can specify <code>AUTO</code> or <code>MANUAL</code>. In <code>AUTO</code> mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is <code>COMPLIANT</code>. If the association execution doesn't run successfully, the association is <code>NON-COMPLIANT</code>.</p>
/// <p>In <code>MANUAL</code> mode, you must specify the <code>AssociationId</code> as a parameter for the <code>PutComplianceItems</code> API operation. In this case, compliance data isn't managed by State Manager. It is managed by your direct call to the <code>PutComplianceItems</code> API operation.</p>
/// <p>By default, all associations use <code>AUTO</code> mode.</p>
pub fn get_sync_compliance(&self) -> &::std::option::Option<crate::types::AssociationSyncCompliance> {
self.inner.get_sync_compliance()
}
/// <p>By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified and when target changes are detected. Specify <code>true</code> for <code>ApplyOnlyAtCronInterval</code>if you want the association to run only according to the schedule you specified.</p>
/// <p>For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#state-manager-about-scheduling">Understanding when associations are applied to resources</a> and <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#runbook-target-updates">>About target updates with Automation runbooks</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
/// <p>This parameter isn't supported for rate expressions.</p>
pub fn apply_only_at_cron_interval(mut self, input: bool) -> Self {
self.inner = self.inner.apply_only_at_cron_interval(input);
self
}
/// <p>By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified and when target changes are detected. Specify <code>true</code> for <code>ApplyOnlyAtCronInterval</code>if you want the association to run only according to the schedule you specified.</p>
/// <p>For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#state-manager-about-scheduling">Understanding when associations are applied to resources</a> and <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#runbook-target-updates">>About target updates with Automation runbooks</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
/// <p>This parameter isn't supported for rate expressions.</p>
pub fn set_apply_only_at_cron_interval(mut self, input: ::std::option::Option<bool>) -> Self {
self.inner = self.inner.set_apply_only_at_cron_interval(input);
self
}
/// <p>By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified and when target changes are detected. Specify <code>true</code> for <code>ApplyOnlyAtCronInterval</code>if you want the association to run only according to the schedule you specified.</p>
/// <p>For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#state-manager-about-scheduling">Understanding when associations are applied to resources</a> and <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#runbook-target-updates">>About target updates with Automation runbooks</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
/// <p>This parameter isn't supported for rate expressions.</p>
pub fn get_apply_only_at_cron_interval(&self) -> &::std::option::Option<bool> {
self.inner.get_apply_only_at_cron_interval()
}
///
/// Appends an item to `CalendarNames`.
///
/// To override the contents of this collection use [`set_calendar_names`](Self::set_calendar_names).
///
/// <p>The names of Amazon Resource Names (ARNs) of the Change Calendar type documents you want to gate your associations under. The associations only run when that change calendar is open. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-change-calendar">Amazon Web Services Systems Manager Change Calendar</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn calendar_names(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.calendar_names(input.into());
self
}
/// <p>The names of Amazon Resource Names (ARNs) of the Change Calendar type documents you want to gate your associations under. The associations only run when that change calendar is open. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-change-calendar">Amazon Web Services Systems Manager Change Calendar</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn set_calendar_names(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
self.inner = self.inner.set_calendar_names(input);
self
}
/// <p>The names of Amazon Resource Names (ARNs) of the Change Calendar type documents you want to gate your associations under. The associations only run when that change calendar is open. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-change-calendar">Amazon Web Services Systems Manager Change Calendar</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn get_calendar_names(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
self.inner.get_calendar_names()
}
///
/// Appends an item to `TargetLocations`.
///
/// To override the contents of this collection use [`set_target_locations`](Self::set_target_locations).
///
/// <p>A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association. Use this action to create an association in multiple Regions and multiple accounts.</p><note>
/// <p>The <code>IncludeChildOrganizationUnits</code> parameter is not supported by State Manager.</p>
/// </note>
pub fn target_locations(mut self, input: crate::types::TargetLocation) -> Self {
self.inner = self.inner.target_locations(input);
self
}
/// <p>A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association. Use this action to create an association in multiple Regions and multiple accounts.</p><note>
/// <p>The <code>IncludeChildOrganizationUnits</code> parameter is not supported by State Manager.</p>
/// </note>
pub fn set_target_locations(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::TargetLocation>>) -> Self {
self.inner = self.inner.set_target_locations(input);
self
}
/// <p>A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association. Use this action to create an association in multiple Regions and multiple accounts.</p><note>
/// <p>The <code>IncludeChildOrganizationUnits</code> parameter is not supported by State Manager.</p>
/// </note>
pub fn get_target_locations(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::TargetLocation>> {
self.inner.get_target_locations()
}
/// <p>Number of days to wait after the scheduled day to run an association. For example, if you specified a cron schedule of <code>cron(0 0 ? * THU#2 *)</code>, you could specify an offset of 3 to run the association each Sunday after the second Thursday of the month. For more information about cron schedules for associations, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html">Reference: Cron and rate expressions for Systems Manager</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p><note>
/// <p>To use offsets, you must specify the <code>ApplyOnlyAtCronInterval</code> parameter. This option tells the system not to run an association immediately after you create it.</p>
/// </note>
pub fn schedule_offset(mut self, input: i32) -> Self {
self.inner = self.inner.schedule_offset(input);
self
}
/// <p>Number of days to wait after the scheduled day to run an association. For example, if you specified a cron schedule of <code>cron(0 0 ? * THU#2 *)</code>, you could specify an offset of 3 to run the association each Sunday after the second Thursday of the month. For more information about cron schedules for associations, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html">Reference: Cron and rate expressions for Systems Manager</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p><note>
/// <p>To use offsets, you must specify the <code>ApplyOnlyAtCronInterval</code> parameter. This option tells the system not to run an association immediately after you create it.</p>
/// </note>
pub fn set_schedule_offset(mut self, input: ::std::option::Option<i32>) -> Self {
self.inner = self.inner.set_schedule_offset(input);
self
}
/// <p>Number of days to wait after the scheduled day to run an association. For example, if you specified a cron schedule of <code>cron(0 0 ? * THU#2 *)</code>, you could specify an offset of 3 to run the association each Sunday after the second Thursday of the month. For more information about cron schedules for associations, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html">Reference: Cron and rate expressions for Systems Manager</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p><note>
/// <p>To use offsets, you must specify the <code>ApplyOnlyAtCronInterval</code> parameter. This option tells the system not to run an association immediately after you create it.</p>
/// </note>
pub fn get_schedule_offset(&self) -> &::std::option::Option<i32> {
self.inner.get_schedule_offset()
}
/// <p>The number of hours the association can run before it is canceled. Duration applies to associations that are currently running, and any pending and in progress commands on all targets. If a target was taken offline for the association to run, it is made available again immediately, without a reboot.</p>
/// <p>The <code>Duration</code> parameter applies only when both these conditions are true:</p>
/// <ul>
/// <li>
/// <p>The association for which you specify a duration is cancelable according to the parameters of the SSM command document or Automation runbook associated with this execution.</p></li>
/// <li>
/// <p>The command specifies the <code> <a href="https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_CreateAssociation.html#systemsmanager-CreateAssociation-request-ApplyOnlyAtCronInterval">ApplyOnlyAtCronInterval</a> </code> parameter, which means that the association doesn't run immediately after it is created, but only according to the specified schedule.</p></li>
/// </ul>
pub fn duration(mut self, input: i32) -> Self {
self.inner = self.inner.duration(input);
self
}
/// <p>The number of hours the association can run before it is canceled. Duration applies to associations that are currently running, and any pending and in progress commands on all targets. If a target was taken offline for the association to run, it is made available again immediately, without a reboot.</p>
/// <p>The <code>Duration</code> parameter applies only when both these conditions are true:</p>
/// <ul>
/// <li>
/// <p>The association for which you specify a duration is cancelable according to the parameters of the SSM command document or Automation runbook associated with this execution.</p></li>
/// <li>
/// <p>The command specifies the <code> <a href="https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_CreateAssociation.html#systemsmanager-CreateAssociation-request-ApplyOnlyAtCronInterval">ApplyOnlyAtCronInterval</a> </code> parameter, which means that the association doesn't run immediately after it is created, but only according to the specified schedule.</p></li>
/// </ul>
pub fn set_duration(mut self, input: ::std::option::Option<i32>) -> Self {
self.inner = self.inner.set_duration(input);
self
}
/// <p>The number of hours the association can run before it is canceled. Duration applies to associations that are currently running, and any pending and in progress commands on all targets. If a target was taken offline for the association to run, it is made available again immediately, without a reboot.</p>
/// <p>The <code>Duration</code> parameter applies only when both these conditions are true:</p>
/// <ul>
/// <li>
/// <p>The association for which you specify a duration is cancelable according to the parameters of the SSM command document or Automation runbook associated with this execution.</p></li>
/// <li>
/// <p>The command specifies the <code> <a href="https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_CreateAssociation.html#systemsmanager-CreateAssociation-request-ApplyOnlyAtCronInterval">ApplyOnlyAtCronInterval</a> </code> parameter, which means that the association doesn't run immediately after it is created, but only according to the specified schedule.</p></li>
/// </ul>
pub fn get_duration(&self) -> &::std::option::Option<i32> {
self.inner.get_duration()
}
///
/// Appends an item to `TargetMaps`.
///
/// To override the contents of this collection use [`set_target_maps`](Self::set_target_maps).
///
/// <p>A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.</p>
pub fn target_maps(mut self, input: ::std::collections::HashMap<::std::string::String, ::std::vec::Vec<::std::string::String>>) -> Self {
self.inner = self.inner.target_maps(input);
self
}
/// <p>A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.</p>
pub fn set_target_maps(
mut self,
input: ::std::option::Option<::std::vec::Vec<::std::collections::HashMap<::std::string::String, ::std::vec::Vec<::std::string::String>>>>,
) -> Self {
self.inner = self.inner.set_target_maps(input);
self
}
/// <p>A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.</p>
pub fn get_target_maps(
&self,
) -> &::std::option::Option<::std::vec::Vec<::std::collections::HashMap<::std::string::String, ::std::vec::Vec<::std::string::String>>>> {
self.inner.get_target_maps()
}
///
/// Appends an item to `Tags`.
///
/// To override the contents of this collection use [`set_tags`](Self::set_tags).
///
/// <p>Adds or overwrites one or more tags for a State Manager association. <i>Tags</i> are metadata that you can assign to your Amazon Web Services resources. Tags enable you to categorize your resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value, both of which you define.</p>
pub fn tags(mut self, input: crate::types::Tag) -> Self {
self.inner = self.inner.tags(input);
self
}
/// <p>Adds or overwrites one or more tags for a State Manager association. <i>Tags</i> are metadata that you can assign to your Amazon Web Services resources. Tags enable you to categorize your resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value, both of which you define.</p>
pub fn set_tags(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Tag>>) -> Self {
self.inner = self.inner.set_tags(input);
self
}
/// <p>Adds or overwrites one or more tags for a State Manager association. <i>Tags</i> are metadata that you can assign to your Amazon Web Services resources. Tags enable you to categorize your resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value, both of which you define.</p>
pub fn get_tags(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Tag>> {
self.inner.get_tags()
}
/// <p>The details for the CloudWatch alarm you want to apply to an automation or command.</p>
pub fn alarm_configuration(mut self, input: crate::types::AlarmConfiguration) -> Self {
self.inner = self.inner.alarm_configuration(input);
self
}
/// <p>The details for the CloudWatch alarm you want to apply to an automation or command.</p>
pub fn set_alarm_configuration(mut self, input: ::std::option::Option<crate::types::AlarmConfiguration>) -> Self {
self.inner = self.inner.set_alarm_configuration(input);
self
}
/// <p>The details for the CloudWatch alarm you want to apply to an automation or command.</p>
pub fn get_alarm_configuration(&self) -> &::std::option::Option<crate::types::AlarmConfiguration> {
self.inner.get_alarm_configuration()
}
/// <p>A role used by association to take actions on your behalf. State Manager will assume this role and call required APIs when dispatching configurations to nodes. If not specified, <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/using-service-linked-roles.html"> service-linked role for Systems Manager</a> will be used by default.</p><note>
/// <p>It is recommended that you define a custom IAM role so that you have full control of the permissions that State Manager has when taking actions on your behalf.</p>
/// <p>Service-linked role support in State Manager is being phased out. Associations relying on service-linked role may require updates in the future to continue functioning properly.</p>
/// </note>
pub fn association_dispatch_assume_role(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.association_dispatch_assume_role(input.into());
self
}
/// <p>A role used by association to take actions on your behalf. State Manager will assume this role and call required APIs when dispatching configurations to nodes. If not specified, <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/using-service-linked-roles.html"> service-linked role for Systems Manager</a> will be used by default.</p><note>
/// <p>It is recommended that you define a custom IAM role so that you have full control of the permissions that State Manager has when taking actions on your behalf.</p>
/// <p>Service-linked role support in State Manager is being phased out. Associations relying on service-linked role may require updates in the future to continue functioning properly.</p>
/// </note>
pub fn set_association_dispatch_assume_role(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_association_dispatch_assume_role(input);
self
}
/// <p>A role used by association to take actions on your behalf. State Manager will assume this role and call required APIs when dispatching configurations to nodes. If not specified, <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/using-service-linked-roles.html"> service-linked role for Systems Manager</a> will be used by default.</p><note>
/// <p>It is recommended that you define a custom IAM role so that you have full control of the permissions that State Manager has when taking actions on your behalf.</p>
/// <p>Service-linked role support in State Manager is being phased out. Associations relying on service-linked role may require updates in the future to continue functioning properly.</p>
/// </note>
pub fn get_association_dispatch_assume_role(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_association_dispatch_assume_role()
}
}