aws-sdk-groundstation 1.32.0

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

/// <p></p>
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::fmt::Debug)]
pub struct UpdateMissionProfileInput {
    /// <p>UUID of a mission profile.</p>
    pub mission_profile_id: ::std::option::Option<::std::string::String>,
    /// <p>Name of a mission profile.</p>
    pub name: ::std::option::Option<::std::string::String>,
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub contact_pre_pass_duration_seconds: ::std::option::Option<i32>,
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub contact_post_pass_duration_seconds: ::std::option::Option<i32>,
    /// <p>Smallest amount of time in seconds that you’d like to see for an available contact. AWS Ground Station will not present you with contacts shorter than this duration.</p>
    pub minimum_viable_contact_duration_seconds: ::std::option::Option<i32>,
    /// <p>A list of lists of ARNs. Each list of ARNs is an edge, with a <i>from</i> <code>Config</code> and a <i>to</i> <code>Config</code>.</p>
    pub dataflow_edges: ::std::option::Option<::std::vec::Vec<::std::vec::Vec<::std::string::String>>>,
    /// <p>ARN of a tracking <code>Config</code>.</p>
    pub tracking_config_arn: ::std::option::Option<::std::string::String>,
    /// <p>KMS key to use for encrypting streams.</p>
    pub streams_kms_key: ::std::option::Option<crate::types::KmsKey>,
    /// <p>Role to use for encrypting streams with KMS key.</p>
    pub streams_kms_role: ::std::option::Option<::std::string::String>,
}
impl UpdateMissionProfileInput {
    /// <p>UUID of a mission profile.</p>
    pub fn mission_profile_id(&self) -> ::std::option::Option<&str> {
        self.mission_profile_id.as_deref()
    }
    /// <p>Name of a mission profile.</p>
    pub fn name(&self) -> ::std::option::Option<&str> {
        self.name.as_deref()
    }
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub fn contact_pre_pass_duration_seconds(&self) -> ::std::option::Option<i32> {
        self.contact_pre_pass_duration_seconds
    }
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub fn contact_post_pass_duration_seconds(&self) -> ::std::option::Option<i32> {
        self.contact_post_pass_duration_seconds
    }
    /// <p>Smallest amount of time in seconds that you’d like to see for an available contact. AWS Ground Station will not present you with contacts shorter than this duration.</p>
    pub fn minimum_viable_contact_duration_seconds(&self) -> ::std::option::Option<i32> {
        self.minimum_viable_contact_duration_seconds
    }
    /// <p>A list of lists of ARNs. Each list of ARNs is an edge, with a <i>from</i> <code>Config</code> and a <i>to</i> <code>Config</code>.</p>
    ///
    /// If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use `.dataflow_edges.is_none()`.
    pub fn dataflow_edges(&self) -> &[::std::vec::Vec<::std::string::String>] {
        self.dataflow_edges.as_deref().unwrap_or_default()
    }
    /// <p>ARN of a tracking <code>Config</code>.</p>
    pub fn tracking_config_arn(&self) -> ::std::option::Option<&str> {
        self.tracking_config_arn.as_deref()
    }
    /// <p>KMS key to use for encrypting streams.</p>
    pub fn streams_kms_key(&self) -> ::std::option::Option<&crate::types::KmsKey> {
        self.streams_kms_key.as_ref()
    }
    /// <p>Role to use for encrypting streams with KMS key.</p>
    pub fn streams_kms_role(&self) -> ::std::option::Option<&str> {
        self.streams_kms_role.as_deref()
    }
}
impl UpdateMissionProfileInput {
    /// Creates a new builder-style object to manufacture [`UpdateMissionProfileInput`](crate::operation::update_mission_profile::UpdateMissionProfileInput).
    pub fn builder() -> crate::operation::update_mission_profile::builders::UpdateMissionProfileInputBuilder {
        crate::operation::update_mission_profile::builders::UpdateMissionProfileInputBuilder::default()
    }
}

/// A builder for [`UpdateMissionProfileInput`](crate::operation::update_mission_profile::UpdateMissionProfileInput).
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default, ::std::fmt::Debug)]
pub struct UpdateMissionProfileInputBuilder {
    pub(crate) mission_profile_id: ::std::option::Option<::std::string::String>,
    pub(crate) name: ::std::option::Option<::std::string::String>,
    pub(crate) contact_pre_pass_duration_seconds: ::std::option::Option<i32>,
    pub(crate) contact_post_pass_duration_seconds: ::std::option::Option<i32>,
    pub(crate) minimum_viable_contact_duration_seconds: ::std::option::Option<i32>,
    pub(crate) dataflow_edges: ::std::option::Option<::std::vec::Vec<::std::vec::Vec<::std::string::String>>>,
    pub(crate) tracking_config_arn: ::std::option::Option<::std::string::String>,
    pub(crate) streams_kms_key: ::std::option::Option<crate::types::KmsKey>,
    pub(crate) streams_kms_role: ::std::option::Option<::std::string::String>,
}
impl UpdateMissionProfileInputBuilder {
    /// <p>UUID of a mission profile.</p>
    /// This field is required.
    pub fn mission_profile_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.mission_profile_id = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>UUID of a mission profile.</p>
    pub fn set_mission_profile_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.mission_profile_id = input;
        self
    }
    /// <p>UUID of a mission profile.</p>
    pub fn get_mission_profile_id(&self) -> &::std::option::Option<::std::string::String> {
        &self.mission_profile_id
    }
    /// <p>Name of a mission profile.</p>
    pub fn name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.name = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>Name of a mission profile.</p>
    pub fn set_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.name = input;
        self
    }
    /// <p>Name of a mission profile.</p>
    pub fn get_name(&self) -> &::std::option::Option<::std::string::String> {
        &self.name
    }
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub fn contact_pre_pass_duration_seconds(mut self, input: i32) -> Self {
        self.contact_pre_pass_duration_seconds = ::std::option::Option::Some(input);
        self
    }
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub fn set_contact_pre_pass_duration_seconds(mut self, input: ::std::option::Option<i32>) -> Self {
        self.contact_pre_pass_duration_seconds = input;
        self
    }
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub fn get_contact_pre_pass_duration_seconds(&self) -> &::std::option::Option<i32> {
        &self.contact_pre_pass_duration_seconds
    }
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub fn contact_post_pass_duration_seconds(mut self, input: i32) -> Self {
        self.contact_post_pass_duration_seconds = ::std::option::Option::Some(input);
        self
    }
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub fn set_contact_post_pass_duration_seconds(mut self, input: ::std::option::Option<i32>) -> Self {
        self.contact_post_pass_duration_seconds = input;
        self
    }
    /// <p>Amount of time after a contact ends that you’d like to receive a Ground Station Contact State Change event indicating the pass has finished.</p>
    pub fn get_contact_post_pass_duration_seconds(&self) -> &::std::option::Option<i32> {
        &self.contact_post_pass_duration_seconds
    }
    /// <p>Smallest amount of time in seconds that you’d like to see for an available contact. AWS Ground Station will not present you with contacts shorter than this duration.</p>
    pub fn minimum_viable_contact_duration_seconds(mut self, input: i32) -> Self {
        self.minimum_viable_contact_duration_seconds = ::std::option::Option::Some(input);
        self
    }
    /// <p>Smallest amount of time in seconds that you’d like to see for an available contact. AWS Ground Station will not present you with contacts shorter than this duration.</p>
    pub fn set_minimum_viable_contact_duration_seconds(mut self, input: ::std::option::Option<i32>) -> Self {
        self.minimum_viable_contact_duration_seconds = input;
        self
    }
    /// <p>Smallest amount of time in seconds that you’d like to see for an available contact. AWS Ground Station will not present you with contacts shorter than this duration.</p>
    pub fn get_minimum_viable_contact_duration_seconds(&self) -> &::std::option::Option<i32> {
        &self.minimum_viable_contact_duration_seconds
    }
    /// Appends an item to `dataflow_edges`.
    ///
    /// To override the contents of this collection use [`set_dataflow_edges`](Self::set_dataflow_edges).
    ///
    /// <p>A list of lists of ARNs. Each list of ARNs is an edge, with a <i>from</i> <code>Config</code> and a <i>to</i> <code>Config</code>.</p>
    pub fn dataflow_edges(mut self, input: ::std::vec::Vec<::std::string::String>) -> Self {
        let mut v = self.dataflow_edges.unwrap_or_default();
        v.push(input);
        self.dataflow_edges = ::std::option::Option::Some(v);
        self
    }
    /// <p>A list of lists of ARNs. Each list of ARNs is an edge, with a <i>from</i> <code>Config</code> and a <i>to</i> <code>Config</code>.</p>
    pub fn set_dataflow_edges(mut self, input: ::std::option::Option<::std::vec::Vec<::std::vec::Vec<::std::string::String>>>) -> Self {
        self.dataflow_edges = input;
        self
    }
    /// <p>A list of lists of ARNs. Each list of ARNs is an edge, with a <i>from</i> <code>Config</code> and a <i>to</i> <code>Config</code>.</p>
    pub fn get_dataflow_edges(&self) -> &::std::option::Option<::std::vec::Vec<::std::vec::Vec<::std::string::String>>> {
        &self.dataflow_edges
    }
    /// <p>ARN of a tracking <code>Config</code>.</p>
    pub fn tracking_config_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.tracking_config_arn = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>ARN of a tracking <code>Config</code>.</p>
    pub fn set_tracking_config_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.tracking_config_arn = input;
        self
    }
    /// <p>ARN of a tracking <code>Config</code>.</p>
    pub fn get_tracking_config_arn(&self) -> &::std::option::Option<::std::string::String> {
        &self.tracking_config_arn
    }
    /// <p>KMS key to use for encrypting streams.</p>
    pub fn streams_kms_key(mut self, input: crate::types::KmsKey) -> Self {
        self.streams_kms_key = ::std::option::Option::Some(input);
        self
    }
    /// <p>KMS key to use for encrypting streams.</p>
    pub fn set_streams_kms_key(mut self, input: ::std::option::Option<crate::types::KmsKey>) -> Self {
        self.streams_kms_key = input;
        self
    }
    /// <p>KMS key to use for encrypting streams.</p>
    pub fn get_streams_kms_key(&self) -> &::std::option::Option<crate::types::KmsKey> {
        &self.streams_kms_key
    }
    /// <p>Role to use for encrypting streams with KMS key.</p>
    pub fn streams_kms_role(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.streams_kms_role = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>Role to use for encrypting streams with KMS key.</p>
    pub fn set_streams_kms_role(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.streams_kms_role = input;
        self
    }
    /// <p>Role to use for encrypting streams with KMS key.</p>
    pub fn get_streams_kms_role(&self) -> &::std::option::Option<::std::string::String> {
        &self.streams_kms_role
    }
    /// Consumes the builder and constructs a [`UpdateMissionProfileInput`](crate::operation::update_mission_profile::UpdateMissionProfileInput).
    pub fn build(
        self,
    ) -> ::std::result::Result<crate::operation::update_mission_profile::UpdateMissionProfileInput, ::aws_smithy_types::error::operation::BuildError>
    {
        ::std::result::Result::Ok(crate::operation::update_mission_profile::UpdateMissionProfileInput {
            mission_profile_id: self.mission_profile_id,
            name: self.name,
            contact_pre_pass_duration_seconds: self.contact_pre_pass_duration_seconds,
            contact_post_pass_duration_seconds: self.contact_post_pass_duration_seconds,
            minimum_viable_contact_duration_seconds: self.minimum_viable_contact_duration_seconds,
            dataflow_edges: self.dataflow_edges,
            tracking_config_arn: self.tracking_config_arn,
            streams_kms_key: self.streams_kms_key,
            streams_kms_role: self.streams_kms_role,
        })
    }
}