aws-sdk-efs 0.27.0

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl UpdateFileSystemInput {
    /// Consumes the builder and constructs an Operation<[`UpdateFileSystem`](crate::operation::update_file_system::UpdateFileSystem)>
    #[allow(unused_mut)]
    #[allow(clippy::let_and_return)]
    #[allow(clippy::needless_borrow)]
    pub async fn make_operation(
        &self,
        _config: &crate::config::Config,
    ) -> std::result::Result<
        aws_smithy_http::operation::Operation<
            crate::operation::update_file_system::UpdateFileSystem,
            aws_http::retry::AwsResponseRetryClassifier,
        >,
        aws_smithy_http::operation::error::BuildError,
    > {
        let params_result = crate::endpoint::Params::builder()
            .set_region(_config.region.as_ref().map(|r| r.as_ref().to_owned()))
            .set_use_dual_stack(_config.use_dual_stack)
            .set_use_fips(_config.use_fips)
            .set_endpoint(_config.endpoint_url.clone())
            .build()
            .map_err(|err| {
                aws_smithy_http::endpoint::ResolveEndpointError::from_source(
                    "could not construct endpoint parameters",
                    err,
                )
            });
        let (endpoint_result, params) = match params_result {
            Ok(params) => (
                _config.endpoint_resolver.resolve_endpoint(&params),
                Some(params),
            ),
            Err(e) => (Err(e), None),
        };
        let mut request = {
            fn uri_base(
                _input: &crate::operation::update_file_system::UpdateFileSystemInput,
                output: &mut String,
            ) -> std::result::Result<(), aws_smithy_http::operation::error::BuildError>
            {
                use std::fmt::Write as _;
                let input_1 = &_input.file_system_id;
                let input_1 = input_1.as_ref().ok_or_else(|| {
                    aws_smithy_http::operation::error::BuildError::missing_field(
                        "file_system_id",
                        "cannot be empty or unset",
                    )
                })?;
                let file_system_id = aws_smithy_http::label::fmt_string(
                    input_1,
                    aws_smithy_http::label::EncodingStrategy::Default,
                );
                if file_system_id.is_empty() {
                    return Err(
                        aws_smithy_http::operation::error::BuildError::missing_field(
                            "file_system_id",
                            "cannot be empty or unset",
                        ),
                    );
                }
                write!(
                    output,
                    "/2015-02-01/file-systems/{FileSystemId}",
                    FileSystemId = file_system_id
                )
                .expect("formatting should succeed");
                Ok(())
            }
            #[allow(clippy::unnecessary_wraps)]
            fn update_http_builder(
                input: &crate::operation::update_file_system::UpdateFileSystemInput,
                builder: http::request::Builder,
            ) -> std::result::Result<
                http::request::Builder,
                aws_smithy_http::operation::error::BuildError,
            > {
                let mut uri = String::new();
                uri_base(input, &mut uri)?;
                Ok(builder.method("PUT").uri(uri))
            }
            let mut builder = update_http_builder(&self, http::request::Builder::new())?;
            builder = aws_smithy_http::header::set_request_header_if_absent(
                builder,
                http::header::CONTENT_TYPE,
                "application/json",
            );
            builder
        };
        let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
        #[allow(clippy::useless_conversion)]
        let body = aws_smithy_http::body::SdkBody::from(
            crate::protocol_serde::shape_update_file_system::ser_update_file_system_input(&self)?,
        );
        if let Some(content_length) = body.content_length() {
            request = aws_smithy_http::header::set_request_header_if_absent(
                request,
                http::header::CONTENT_LENGTH,
                content_length,
            );
        }
        let request = request.body(body).expect("should be valid request");
        let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
        request.properties_mut().insert(endpoint_result);
        if let Some(params) = params {
            request.properties_mut().insert(params);
        }
        request
            .properties_mut()
            .insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
        let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
            aws_types::os_shim_internal::Env::real(),
            crate::meta::API_METADATA.clone(),
        );
        if let Some(app_name) = _config.app_name() {
            user_agent = user_agent.with_app_name(app_name.clone());
        }
        request.properties_mut().insert(user_agent);
        let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
        request.properties_mut().insert(signing_config);
        request
            .properties_mut()
            .insert(aws_types::SigningService::from_static(
                _config.signing_service(),
            ));
        if let Some(region) = &_config.region {
            request
                .properties_mut()
                .insert(aws_types::region::SigningRegion::from(region.clone()));
        }
        if let Some(region) = &_config.region {
            request.properties_mut().insert(region.clone());
        }
        aws_http::auth::set_credentials_cache(
            &mut request.properties_mut(),
            _config.credentials_cache.clone(),
        );
        let op = aws_smithy_http::operation::Operation::new(
            request,
            crate::operation::update_file_system::UpdateFileSystem::new(),
        )
        .with_metadata(aws_smithy_http::operation::Metadata::new(
            "UpdateFileSystem",
            "efs",
        ));
        let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
        Ok(op)
    }
}
/// `ParseStrictResponse` impl for `UpdateFileSystem`.
#[derive(std::clone::Clone, std::default::Default, std::fmt::Debug)]
#[non_exhaustive]
#[doc(hidden)]
pub struct UpdateFileSystem;
impl UpdateFileSystem {
    #[doc(hidden)]
    pub fn new() -> Self {
        Self
    }
}
impl aws_smithy_http::response::ParseStrictResponse for UpdateFileSystem {
    type Output = std::result::Result<
        crate::operation::update_file_system::UpdateFileSystemOutput,
        crate::operation::update_file_system::UpdateFileSystemError,
    >;
    fn parse(&self, response: &http::Response<bytes::Bytes>) -> Self::Output {
        let (success, status) = (response.status().is_success(), response.status().as_u16());
        let headers = response.headers();
        let body = response.body().as_ref();
        tracing::debug!(request_id = ?aws_http::request_id::RequestId::request_id(response));
        if !success && status != 202 {
            crate::protocol_serde::shape_update_file_system::de_update_file_system_http_error(
                status, headers, body,
            )
        } else {
            crate::protocol_serde::shape_update_file_system::de_update_file_system_http_response(
                status, headers, body,
            )
        }
    }
}

/// Do not use this.
///
/// Operation `*Error/*ErrorKind` types were combined into a single `*Error` enum. The `.kind` field on `*Error` no longer exists and isn't needed anymore (you can just match on the error directly since it's an enum now).
#[deprecated(
    note = "Operation `*Error/*ErrorKind` types were combined into a single `*Error` enum. The `.kind` field on `*Error` no longer exists and isn't needed anymore (you can just match on the error directly since it's an enum now)."
)]
pub type UpdateFileSystemErrorKind = UpdateFileSystemError;
/// Error type for the `UpdateFileSystemError` operation.
#[non_exhaustive]
#[derive(std::fmt::Debug)]
pub enum UpdateFileSystemError {
    /// <p>Returned if the request is malformed or contains an error such as an invalid parameter value or a missing required parameter.</p>
    BadRequest(crate::types::error::BadRequest),
    /// <p>Returned if the specified <code>FileSystemId</code> value doesn't exist in the requester's Amazon Web Services account.</p>
    FileSystemNotFound(crate::types::error::FileSystemNotFound),
    /// <p>Returned if the file system's lifecycle state is not "available".</p>
    IncorrectFileSystemLifeCycleState(crate::types::error::IncorrectFileSystemLifeCycleState),
    /// <p>Returned if there's not enough capacity to provision additional throughput. This value might be returned when you try to create a file system in provisioned throughput mode, when you attempt to increase the provisioned throughput of an existing file system, or when you attempt to change an existing file system from Bursting Throughput to Provisioned Throughput mode. Try again later.</p>
    InsufficientThroughputCapacity(crate::types::error::InsufficientThroughputCapacity),
    /// <p>Returned if an error occurred on the server side.</p>
    InternalServerError(crate::types::error::InternalServerError),
    /// <p>Returned if the throughput mode or amount of provisioned throughput can't be changed because the throughput limit of 1024 MiB/s has been reached.</p>
    ThroughputLimitExceeded(crate::types::error::ThroughputLimitExceeded),
    /// <p>Returned if you don’t wait at least 24 hours before either changing the throughput mode, or decreasing the Provisioned Throughput value.</p>
    TooManyRequests(crate::types::error::TooManyRequests),
    /// An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
    Unhandled(aws_smithy_types::error::Unhandled),
}
impl aws_smithy_http::result::CreateUnhandledError for UpdateFileSystemError {
    fn create_unhandled_error(
        source: Box<dyn std::error::Error + Send + Sync + 'static>,
        meta: std::option::Option<aws_smithy_types::error::ErrorMetadata>,
    ) -> Self {
        Self::Unhandled({
            let mut builder = aws_smithy_types::error::Unhandled::builder().source(source);
            builder.set_meta(meta);
            builder.build()
        })
    }
}
impl std::fmt::Display for UpdateFileSystemError {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        match self {
            Self::BadRequest(_inner) => _inner.fmt(f),
            Self::FileSystemNotFound(_inner) => _inner.fmt(f),
            Self::IncorrectFileSystemLifeCycleState(_inner) => _inner.fmt(f),
            Self::InsufficientThroughputCapacity(_inner) => _inner.fmt(f),
            Self::InternalServerError(_inner) => _inner.fmt(f),
            Self::ThroughputLimitExceeded(_inner) => _inner.fmt(f),
            Self::TooManyRequests(_inner) => _inner.fmt(f),
            Self::Unhandled(_inner) => _inner.fmt(f),
        }
    }
}
impl aws_smithy_types::error::metadata::ProvideErrorMetadata for UpdateFileSystemError {
    fn meta(&self) -> &aws_smithy_types::error::ErrorMetadata {
        match self {
            Self::BadRequest(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::FileSystemNotFound(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::IncorrectFileSystemLifeCycleState(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::InsufficientThroughputCapacity(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::InternalServerError(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::ThroughputLimitExceeded(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::TooManyRequests(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::Unhandled(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
        }
    }
}
impl aws_http::request_id::RequestId
    for crate::operation::update_file_system::UpdateFileSystemError
{
    fn request_id(&self) -> Option<&str> {
        self.meta().request_id()
    }
}
impl aws_smithy_types::retry::ProvideErrorKind for UpdateFileSystemError {
    fn code(&self) -> std::option::Option<&str> {
        aws_smithy_types::error::metadata::ProvideErrorMetadata::code(self)
    }
    fn retryable_error_kind(&self) -> std::option::Option<aws_smithy_types::retry::ErrorKind> {
        None
    }
}
impl UpdateFileSystemError {
    /// Creates the `UpdateFileSystemError::Unhandled` variant from any error type.
    pub fn unhandled(err: impl Into<Box<dyn std::error::Error + Send + Sync + 'static>>) -> Self {
        Self::Unhandled(
            aws_smithy_types::error::Unhandled::builder()
                .source(err)
                .build(),
        )
    }

    /// Creates the `UpdateFileSystemError::Unhandled` variant from a `aws_smithy_types::error::ErrorMetadata`.
    pub fn generic(err: aws_smithy_types::error::ErrorMetadata) -> Self {
        Self::Unhandled(
            aws_smithy_types::error::Unhandled::builder()
                .source(err.clone())
                .meta(err)
                .build(),
        )
    }
    ///
    /// Returns error metadata, which includes the error code, message,
    /// request ID, and potentially additional information.
    ///
    pub fn meta(&self) -> &aws_smithy_types::error::ErrorMetadata {
        use aws_smithy_types::error::metadata::ProvideErrorMetadata;
        match self {
            Self::BadRequest(e) => e.meta(),
            Self::FileSystemNotFound(e) => e.meta(),
            Self::IncorrectFileSystemLifeCycleState(e) => e.meta(),
            Self::InsufficientThroughputCapacity(e) => e.meta(),
            Self::InternalServerError(e) => e.meta(),
            Self::ThroughputLimitExceeded(e) => e.meta(),
            Self::TooManyRequests(e) => e.meta(),
            Self::Unhandled(e) => e.meta(),
        }
    }
    /// Returns `true` if the error kind is `UpdateFileSystemError::BadRequest`.
    pub fn is_bad_request(&self) -> bool {
        matches!(self, Self::BadRequest(_))
    }
    /// Returns `true` if the error kind is `UpdateFileSystemError::FileSystemNotFound`.
    pub fn is_file_system_not_found(&self) -> bool {
        matches!(self, Self::FileSystemNotFound(_))
    }
    /// Returns `true` if the error kind is `UpdateFileSystemError::IncorrectFileSystemLifeCycleState`.
    pub fn is_incorrect_file_system_life_cycle_state(&self) -> bool {
        matches!(self, Self::IncorrectFileSystemLifeCycleState(_))
    }
    /// Returns `true` if the error kind is `UpdateFileSystemError::InsufficientThroughputCapacity`.
    pub fn is_insufficient_throughput_capacity(&self) -> bool {
        matches!(self, Self::InsufficientThroughputCapacity(_))
    }
    /// Returns `true` if the error kind is `UpdateFileSystemError::InternalServerError`.
    pub fn is_internal_server_error(&self) -> bool {
        matches!(self, Self::InternalServerError(_))
    }
    /// Returns `true` if the error kind is `UpdateFileSystemError::ThroughputLimitExceeded`.
    pub fn is_throughput_limit_exceeded(&self) -> bool {
        matches!(self, Self::ThroughputLimitExceeded(_))
    }
    /// Returns `true` if the error kind is `UpdateFileSystemError::TooManyRequests`.
    pub fn is_too_many_requests(&self) -> bool {
        matches!(self, Self::TooManyRequests(_))
    }
}
impl std::error::Error for UpdateFileSystemError {
    fn source(&self) -> std::option::Option<&(dyn std::error::Error + 'static)> {
        match self {
            Self::BadRequest(_inner) => Some(_inner),
            Self::FileSystemNotFound(_inner) => Some(_inner),
            Self::IncorrectFileSystemLifeCycleState(_inner) => Some(_inner),
            Self::InsufficientThroughputCapacity(_inner) => Some(_inner),
            Self::InternalServerError(_inner) => Some(_inner),
            Self::ThroughputLimitExceeded(_inner) => Some(_inner),
            Self::TooManyRequests(_inner) => Some(_inner),
            Self::Unhandled(_inner) => Some(_inner),
        }
    }
}

pub use crate::operation::update_file_system::_update_file_system_output::UpdateFileSystemOutput;

pub use crate::operation::update_file_system::_update_file_system_input::UpdateFileSystemInput;

mod _update_file_system_input;

mod _update_file_system_output;

/// Builders
pub mod builders;