// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::list_tasks::_list_tasks_input::ListTasksInputBuilder;
pub use crate::operation::list_tasks::_list_tasks_output::ListTasksOutputBuilder;
impl crate::operation::list_tasks::builders::ListTasksInputBuilder {
/// Sends a request with this input using the given client.
pub async fn send_with(
self,
client: &crate::Client,
) -> ::std::result::Result<
crate::operation::list_tasks::ListTasksOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::list_tasks::ListTasksError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let mut fluent_builder = client.list_tasks();
fluent_builder.inner = self;
fluent_builder.send().await
}
}
/// Fluent builder constructing a request to `ListTasks`.
///
/// <p>Returns a list of tasks. You can filter the results by cluster, task definition family, container instance, launch type, what IAM principal started the task, or by the desired status of the task.</p>
/// <p>Recently stopped tasks might appear in the returned results.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct ListTasksFluentBuilder {
handle: ::std::sync::Arc<crate::client::Handle>,
inner: crate::operation::list_tasks::builders::ListTasksInputBuilder,
config_override: ::std::option::Option<crate::config::Builder>,
}
impl crate::client::customize::internal::CustomizableSend<crate::operation::list_tasks::ListTasksOutput, crate::operation::list_tasks::ListTasksError>
for ListTasksFluentBuilder
{
fn send(
self,
config_override: crate::config::Builder,
) -> crate::client::customize::internal::BoxFuture<
crate::client::customize::internal::SendResult<crate::operation::list_tasks::ListTasksOutput, crate::operation::list_tasks::ListTasksError>,
> {
::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
}
}
impl ListTasksFluentBuilder {
/// Creates a new `ListTasksFluentBuilder`.
pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
Self {
handle,
inner: ::std::default::Default::default(),
config_override: ::std::option::Option::None,
}
}
/// Access the ListTasks as a reference.
pub fn as_input(&self) -> &crate::operation::list_tasks::builders::ListTasksInputBuilder {
&self.inner
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> ::std::result::Result<
crate::operation::list_tasks::ListTasksOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::list_tasks::ListTasksError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let input = self
.inner
.build()
.map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
let runtime_plugins = crate::operation::list_tasks::ListTasks::operation_runtime_plugins(
self.handle.runtime_plugins.clone(),
&self.handle.conf,
self.config_override,
);
crate::operation::list_tasks::ListTasks::orchestrate(&runtime_plugins, input).await
}
/// Consumes this builder, creating a customizable operation that can be modified before being sent.
pub fn customize(
self,
) -> crate::client::customize::CustomizableOperation<
crate::operation::list_tasks::ListTasksOutput,
crate::operation::list_tasks::ListTasksError,
Self,
> {
crate::client::customize::CustomizableOperation::new(self)
}
pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
self.set_config_override(::std::option::Option::Some(config_override.into()));
self
}
pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
self.config_override = config_override;
self
}
/// Create a paginator for this request
///
/// Paginators are used by calling [`send().await`](crate::operation::list_tasks::paginator::ListTasksPaginator::send) which returns a [`PaginationStream`](aws_smithy_async::future::pagination_stream::PaginationStream).
pub fn into_paginator(self) -> crate::operation::list_tasks::paginator::ListTasksPaginator {
crate::operation::list_tasks::paginator::ListTasksPaginator::new(self.handle, self.inner)
}
/// <p>The short name or full Amazon Resource Name (ARN) of the cluster to use when filtering the <code>ListTasks</code> results. If you do not specify a cluster, the default cluster is assumed.</p>
pub fn cluster(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.cluster(input.into());
self
}
/// <p>The short name or full Amazon Resource Name (ARN) of the cluster to use when filtering the <code>ListTasks</code> results. If you do not specify a cluster, the default cluster is assumed.</p>
pub fn set_cluster(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_cluster(input);
self
}
/// <p>The short name or full Amazon Resource Name (ARN) of the cluster to use when filtering the <code>ListTasks</code> results. If you do not specify a cluster, the default cluster is assumed.</p>
pub fn get_cluster(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_cluster()
}
/// <p>The container instance ID or full ARN of the container instance to use when filtering the <code>ListTasks</code> results. Specifying a <code>containerInstance</code> limits the results to tasks that belong to that container instance.</p>
pub fn container_instance(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.container_instance(input.into());
self
}
/// <p>The container instance ID or full ARN of the container instance to use when filtering the <code>ListTasks</code> results. Specifying a <code>containerInstance</code> limits the results to tasks that belong to that container instance.</p>
pub fn set_container_instance(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_container_instance(input);
self
}
/// <p>The container instance ID or full ARN of the container instance to use when filtering the <code>ListTasks</code> results. Specifying a <code>containerInstance</code> limits the results to tasks that belong to that container instance.</p>
pub fn get_container_instance(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_container_instance()
}
/// <p>The name of the task definition family to use when filtering the <code>ListTasks</code> results. Specifying a <code>family</code> limits the results to tasks that belong to that family.</p>
pub fn family(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.family(input.into());
self
}
/// <p>The name of the task definition family to use when filtering the <code>ListTasks</code> results. Specifying a <code>family</code> limits the results to tasks that belong to that family.</p>
pub fn set_family(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_family(input);
self
}
/// <p>The name of the task definition family to use when filtering the <code>ListTasks</code> results. Specifying a <code>family</code> limits the results to tasks that belong to that family.</p>
pub fn get_family(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_family()
}
/// <p>The <code>nextToken</code> value returned from a <code>ListTasks</code> request indicating that more results are available to fulfill the request and further calls will be needed. If <code>maxResults</code> was provided, it's possible the number of results to be fewer than <code>maxResults</code>.</p><note>
/// <p>This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.</p>
/// </note>
pub fn next_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.next_token(input.into());
self
}
/// <p>The <code>nextToken</code> value returned from a <code>ListTasks</code> request indicating that more results are available to fulfill the request and further calls will be needed. If <code>maxResults</code> was provided, it's possible the number of results to be fewer than <code>maxResults</code>.</p><note>
/// <p>This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.</p>
/// </note>
pub fn set_next_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_next_token(input);
self
}
/// <p>The <code>nextToken</code> value returned from a <code>ListTasks</code> request indicating that more results are available to fulfill the request and further calls will be needed. If <code>maxResults</code> was provided, it's possible the number of results to be fewer than <code>maxResults</code>.</p><note>
/// <p>This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.</p>
/// </note>
pub fn get_next_token(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_next_token()
}
/// <p>The maximum number of task results that <code>ListTasks</code> returned in paginated output. When this parameter is used, <code>ListTasks</code> only returns <code>maxResults</code> results in a single page along with a <code>nextToken</code> response element. The remaining results of the initial request can be seen by sending another <code>ListTasks</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If this parameter isn't used, then <code>ListTasks</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn max_results(mut self, input: i32) -> Self {
self.inner = self.inner.max_results(input);
self
}
/// <p>The maximum number of task results that <code>ListTasks</code> returned in paginated output. When this parameter is used, <code>ListTasks</code> only returns <code>maxResults</code> results in a single page along with a <code>nextToken</code> response element. The remaining results of the initial request can be seen by sending another <code>ListTasks</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If this parameter isn't used, then <code>ListTasks</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn set_max_results(mut self, input: ::std::option::Option<i32>) -> Self {
self.inner = self.inner.set_max_results(input);
self
}
/// <p>The maximum number of task results that <code>ListTasks</code> returned in paginated output. When this parameter is used, <code>ListTasks</code> only returns <code>maxResults</code> results in a single page along with a <code>nextToken</code> response element. The remaining results of the initial request can be seen by sending another <code>ListTasks</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If this parameter isn't used, then <code>ListTasks</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn get_max_results(&self) -> &::std::option::Option<i32> {
self.inner.get_max_results()
}
/// <p>The <code>startedBy</code> value to filter the task results with. Specifying a <code>startedBy</code> value limits the results to tasks that were started with that value.</p>
/// <p>When you specify <code>startedBy</code> as the filter, it must be the only filter that you use.</p>
pub fn started_by(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.started_by(input.into());
self
}
/// <p>The <code>startedBy</code> value to filter the task results with. Specifying a <code>startedBy</code> value limits the results to tasks that were started with that value.</p>
/// <p>When you specify <code>startedBy</code> as the filter, it must be the only filter that you use.</p>
pub fn set_started_by(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_started_by(input);
self
}
/// <p>The <code>startedBy</code> value to filter the task results with. Specifying a <code>startedBy</code> value limits the results to tasks that were started with that value.</p>
/// <p>When you specify <code>startedBy</code> as the filter, it must be the only filter that you use.</p>
pub fn get_started_by(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_started_by()
}
/// <p>The name of the service to use when filtering the <code>ListTasks</code> results. Specifying a <code>serviceName</code> limits the results to tasks that belong to that service.</p>
pub fn service_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.service_name(input.into());
self
}
/// <p>The name of the service to use when filtering the <code>ListTasks</code> results. Specifying a <code>serviceName</code> limits the results to tasks that belong to that service.</p>
pub fn set_service_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_service_name(input);
self
}
/// <p>The name of the service to use when filtering the <code>ListTasks</code> results. Specifying a <code>serviceName</code> limits the results to tasks that belong to that service.</p>
pub fn get_service_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_service_name()
}
/// <p>The task desired status to use when filtering the <code>ListTasks</code> results. Specifying a <code>desiredStatus</code> of <code>STOPPED</code> limits the results to tasks that Amazon ECS has set the desired status to <code>STOPPED</code>. This can be useful for debugging tasks that aren't starting properly or have died or finished. The default status filter is <code>RUNNING</code>, which shows tasks that Amazon ECS has set the desired status to <code>RUNNING</code>.</p><note>
/// <p>Although you can filter results based on a desired status of <code>PENDING</code>, this doesn't return any results. Amazon ECS never sets the desired status of a task to that value (only a task's <code>lastStatus</code> may have a value of <code>PENDING</code>).</p>
/// </note>
pub fn desired_status(mut self, input: crate::types::DesiredStatus) -> Self {
self.inner = self.inner.desired_status(input);
self
}
/// <p>The task desired status to use when filtering the <code>ListTasks</code> results. Specifying a <code>desiredStatus</code> of <code>STOPPED</code> limits the results to tasks that Amazon ECS has set the desired status to <code>STOPPED</code>. This can be useful for debugging tasks that aren't starting properly or have died or finished. The default status filter is <code>RUNNING</code>, which shows tasks that Amazon ECS has set the desired status to <code>RUNNING</code>.</p><note>
/// <p>Although you can filter results based on a desired status of <code>PENDING</code>, this doesn't return any results. Amazon ECS never sets the desired status of a task to that value (only a task's <code>lastStatus</code> may have a value of <code>PENDING</code>).</p>
/// </note>
pub fn set_desired_status(mut self, input: ::std::option::Option<crate::types::DesiredStatus>) -> Self {
self.inner = self.inner.set_desired_status(input);
self
}
/// <p>The task desired status to use when filtering the <code>ListTasks</code> results. Specifying a <code>desiredStatus</code> of <code>STOPPED</code> limits the results to tasks that Amazon ECS has set the desired status to <code>STOPPED</code>. This can be useful for debugging tasks that aren't starting properly or have died or finished. The default status filter is <code>RUNNING</code>, which shows tasks that Amazon ECS has set the desired status to <code>RUNNING</code>.</p><note>
/// <p>Although you can filter results based on a desired status of <code>PENDING</code>, this doesn't return any results. Amazon ECS never sets the desired status of a task to that value (only a task's <code>lastStatus</code> may have a value of <code>PENDING</code>).</p>
/// </note>
pub fn get_desired_status(&self) -> &::std::option::Option<crate::types::DesiredStatus> {
self.inner.get_desired_status()
}
/// <p>The launch type to use when filtering the <code>ListTasks</code> results.</p>
pub fn launch_type(mut self, input: crate::types::LaunchType) -> Self {
self.inner = self.inner.launch_type(input);
self
}
/// <p>The launch type to use when filtering the <code>ListTasks</code> results.</p>
pub fn set_launch_type(mut self, input: ::std::option::Option<crate::types::LaunchType>) -> Self {
self.inner = self.inner.set_launch_type(input);
self
}
/// <p>The launch type to use when filtering the <code>ListTasks</code> results.</p>
pub fn get_launch_type(&self) -> &::std::option::Option<crate::types::LaunchType> {
self.inner.get_launch_type()
}
/// <p>The name of the daemon to use when filtering the <code>ListTasks</code> results. Specifying a <code>daemonName</code> limits the results to tasks that belong to that daemon.</p>
pub fn daemon_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.daemon_name(input.into());
self
}
/// <p>The name of the daemon to use when filtering the <code>ListTasks</code> results. Specifying a <code>daemonName</code> limits the results to tasks that belong to that daemon.</p>
pub fn set_daemon_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_daemon_name(input);
self
}
/// <p>The name of the daemon to use when filtering the <code>ListTasks</code> results. Specifying a <code>daemonName</code> limits the results to tasks that belong to that daemon.</p>
pub fn get_daemon_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_daemon_name()
}
}