// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::list_daemons::_list_daemons_input::ListDaemonsInputBuilder;
pub use crate::operation::list_daemons::_list_daemons_output::ListDaemonsOutputBuilder;
impl crate::operation::list_daemons::builders::ListDaemonsInputBuilder {
/// Sends a request with this input using the given client.
pub async fn send_with(
self,
client: &crate::Client,
) -> ::std::result::Result<
crate::operation::list_daemons::ListDaemonsOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::list_daemons::ListDaemonsError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let mut fluent_builder = client.list_daemons();
fluent_builder.inner = self;
fluent_builder.send().await
}
}
/// Fluent builder constructing a request to `ListDaemons`.
///
/// <p>Returns a list of daemons. You can filter the results by cluster or capacity provider.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct ListDaemonsFluentBuilder {
handle: ::std::sync::Arc<crate::client::Handle>,
inner: crate::operation::list_daemons::builders::ListDaemonsInputBuilder,
config_override: ::std::option::Option<crate::config::Builder>,
}
impl
crate::client::customize::internal::CustomizableSend<
crate::operation::list_daemons::ListDaemonsOutput,
crate::operation::list_daemons::ListDaemonsError,
> for ListDaemonsFluentBuilder
{
fn send(
self,
config_override: crate::config::Builder,
) -> crate::client::customize::internal::BoxFuture<
crate::client::customize::internal::SendResult<
crate::operation::list_daemons::ListDaemonsOutput,
crate::operation::list_daemons::ListDaemonsError,
>,
> {
::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
}
}
impl ListDaemonsFluentBuilder {
/// Creates a new `ListDaemonsFluentBuilder`.
pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
Self {
handle,
inner: ::std::default::Default::default(),
config_override: ::std::option::Option::None,
}
}
/// Access the ListDaemons as a reference.
pub fn as_input(&self) -> &crate::operation::list_daemons::builders::ListDaemonsInputBuilder {
&self.inner
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> ::std::result::Result<
crate::operation::list_daemons::ListDaemonsOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::list_daemons::ListDaemonsError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let input = self
.inner
.build()
.map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
let runtime_plugins = crate::operation::list_daemons::ListDaemons::operation_runtime_plugins(
self.handle.runtime_plugins.clone(),
&self.handle.conf,
self.config_override,
);
crate::operation::list_daemons::ListDaemons::orchestrate(&runtime_plugins, input).await
}
/// Consumes this builder, creating a customizable operation that can be modified before being sent.
pub fn customize(
self,
) -> crate::client::customize::CustomizableOperation<
crate::operation::list_daemons::ListDaemonsOutput,
crate::operation::list_daemons::ListDaemonsError,
Self,
> {
crate::client::customize::CustomizableOperation::new(self)
}
pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
self.set_config_override(::std::option::Option::Some(config_override.into()));
self
}
pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
self.config_override = config_override;
self
}
/// <p>The Amazon Resource Name (ARN) of the cluster to filter daemons by. If not specified, daemons from all clusters are returned.</p>
pub fn cluster_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.cluster_arn(input.into());
self
}
/// <p>The Amazon Resource Name (ARN) of the cluster to filter daemons by. If not specified, daemons from all clusters are returned.</p>
pub fn set_cluster_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_cluster_arn(input);
self
}
/// <p>The Amazon Resource Name (ARN) of the cluster to filter daemons by. If not specified, daemons from all clusters are returned.</p>
pub fn get_cluster_arn(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_cluster_arn()
}
///
/// Appends an item to `capacityProviderArns`.
///
/// To override the contents of this collection use [`set_capacity_provider_arns`](Self::set_capacity_provider_arns).
///
/// <p>The Amazon Resource Names (ARNs) of the capacity providers to filter daemons by. Only daemons associated with the specified capacity providers are returned.</p>
pub fn capacity_provider_arns(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.capacity_provider_arns(input.into());
self
}
/// <p>The Amazon Resource Names (ARNs) of the capacity providers to filter daemons by. Only daemons associated with the specified capacity providers are returned.</p>
pub fn set_capacity_provider_arns(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
self.inner = self.inner.set_capacity_provider_arns(input);
self
}
/// <p>The Amazon Resource Names (ARNs) of the capacity providers to filter daemons by. Only daemons associated with the specified capacity providers are returned.</p>
pub fn get_capacity_provider_arns(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
self.inner.get_capacity_provider_arns()
}
/// <p>The maximum number of daemon results that <code>ListDaemons</code> returned in paginated output. When this parameter is used, <code>ListDaemons</code> only returns <code>maxResults</code> results in a single page along with a <code>nextToken</code> response element. The remaining results of the initial request can be seen by sending another <code>ListDaemons</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If this parameter isn't used, then <code>ListDaemons</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn max_results(mut self, input: i32) -> Self {
self.inner = self.inner.max_results(input);
self
}
/// <p>The maximum number of daemon results that <code>ListDaemons</code> returned in paginated output. When this parameter is used, <code>ListDaemons</code> only returns <code>maxResults</code> results in a single page along with a <code>nextToken</code> response element. The remaining results of the initial request can be seen by sending another <code>ListDaemons</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If this parameter isn't used, then <code>ListDaemons</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn set_max_results(mut self, input: ::std::option::Option<i32>) -> Self {
self.inner = self.inner.set_max_results(input);
self
}
/// <p>The maximum number of daemon results that <code>ListDaemons</code> returned in paginated output. When this parameter is used, <code>ListDaemons</code> only returns <code>maxResults</code> results in a single page along with a <code>nextToken</code> response element. The remaining results of the initial request can be seen by sending another <code>ListDaemons</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If this parameter isn't used, then <code>ListDaemons</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn get_max_results(&self) -> &::std::option::Option<i32> {
self.inner.get_max_results()
}
/// <p>The <code>nextToken</code> value returned from a <code>ListDaemons</code> request indicating that more results are available to fulfill the request and further calls will be needed. If <code>maxResults</code> was provided, it's possible for the number of results to be fewer than <code>maxResults</code>.</p><note>
/// <p>This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.</p>
/// </note>
pub fn next_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.next_token(input.into());
self
}
/// <p>The <code>nextToken</code> value returned from a <code>ListDaemons</code> request indicating that more results are available to fulfill the request and further calls will be needed. If <code>maxResults</code> was provided, it's possible for the number of results to be fewer than <code>maxResults</code>.</p><note>
/// <p>This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.</p>
/// </note>
pub fn set_next_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_next_token(input);
self
}
/// <p>The <code>nextToken</code> value returned from a <code>ListDaemons</code> request indicating that more results are available to fulfill the request and further calls will be needed. If <code>maxResults</code> was provided, it's possible for the number of results to be fewer than <code>maxResults</code>.</p><note>
/// <p>This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.</p>
/// </note>
pub fn get_next_token(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_next_token()
}
}