// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
    pub(crate) client: aws_smithy_client::Client<
        aws_smithy_client::erase::DynConnector,
        aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
    >,
    pub(crate) conf: crate::Config,
}

/// Client for Amazon Connect Contact Lens
///
/// Client for invoking operations on Amazon Connect Contact Lens. Each operation on Amazon Connect Contact Lens is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
///     // create a shared configuration. This can be used & shared between multiple service clients.
///     let shared_config = aws_config::load_from_env().await;
///     let client = aws_sdk_connectcontactlens::Client::new(&shared_config);
///     // invoke an operation
///     /* let rsp = client
///         .<operation_name>().
///         .<param>("some value")
///         .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::RetryConfig;
/// # async fn docs() {
/// let shared_config = aws_config::load_from_env().await;
/// let config = aws_sdk_connectcontactlens::config::Builder::from(&shared_config)
///   .retry_config(RetryConfig::disabled())
///   .build();
/// let client = aws_sdk_connectcontactlens::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client {
    handle: std::sync::Arc<Handle>,
}

impl std::clone::Clone for Client {
    fn clone(&self) -> Self {
        Self {
            handle: self.handle.clone(),
        }
    }
}

#[doc(inline)]
pub use aws_smithy_client::Builder;

impl
    From<
        aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
    > for Client
{
    fn from(
        client: aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
    ) -> Self {
        Self::with_config(client, crate::Config::builder().build())
    }
}

impl Client {
    /// Creates a client with the given service configuration.
    pub fn with_config(
        client: aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
        conf: crate::Config,
    ) -> Self {
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }

    /// Returns the client's configuration.
    pub fn conf(&self) -> &crate::Config {
        &self.handle.conf
    }
}
impl Client {
    /// Constructs a fluent builder for the [`ListRealtimeContactAnalysisSegments`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`instance_id(impl Into<String>)`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::instance_id) / [`set_instance_id(Option<String>)`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::set_instance_id): <p>The identifier of the Amazon Connect instance.</p>
    ///   - [`contact_id(impl Into<String>)`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::contact_id) / [`set_contact_id(Option<String>)`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::set_contact_id): <p>The identifier of the contact.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::max_results) / [`set_max_results(i32)`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::set_max_results): <p>The maximimum number of results to return per page.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListRealtimeContactAnalysisSegments::set_next_token): <p>The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.</p>
    /// - On success, responds with [`ListRealtimeContactAnalysisSegmentsOutput`](crate::output::ListRealtimeContactAnalysisSegmentsOutput) with field(s):
    ///   - [`segments(Option<Vec<RealtimeContactAnalysisSegment>>)`](crate::output::ListRealtimeContactAnalysisSegmentsOutput::segments): <p>An analyzed transcript or category.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListRealtimeContactAnalysisSegmentsOutput::next_token): <p>If there are additional results, this is the token for the next set of results. If response includes <code>nextToken</code> there are two possible scenarios:</p>  <ul>   <li> <p>There are more segments so another call is required to get them.</p> </li>   <li> <p>There are no more segments at this time, but more may be available later (real-time analysis is in progress) so the client should call the operation again to get new segments.</p> </li>  </ul>  <p>If response does not include <code>nextToken</code>, the analysis is completed (successfully or failed) and there are no more segments to retrieve.</p>
    /// - On failure, responds with [`SdkError<ListRealtimeContactAnalysisSegmentsError>`](crate::error::ListRealtimeContactAnalysisSegmentsError)
    pub fn list_realtime_contact_analysis_segments(
        &self,
    ) -> fluent_builders::ListRealtimeContactAnalysisSegments {
        fluent_builders::ListRealtimeContactAnalysisSegments::new(self.handle.clone())
    }
}
pub mod fluent_builders {
    //!
    //! Utilities to ergonomically construct a request to the service.
    //!
    //! Fluent builders are created through the [`Client`](crate::client::Client) by calling
    //! one if its operation methods. After parameters are set using the builder methods,
    //! the `send` method can be called to initiate the request.
    //!
    /// Fluent builder constructing a request to `ListRealtimeContactAnalysisSegments`.
    ///
    /// <p>Provides a list of analysis segments for a real-time analysis session.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListRealtimeContactAnalysisSegments {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_realtime_contact_analysis_segments_input::Builder,
    }
    impl ListRealtimeContactAnalysisSegments {
        /// Creates a new `ListRealtimeContactAnalysisSegments`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListRealtimeContactAnalysisSegmentsOutput,
            aws_smithy_http::result::SdkError<
                crate::error::ListRealtimeContactAnalysisSegmentsError,
            >,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListRealtimeContactAnalysisSegmentsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(
            self,
        ) -> crate::paginator::ListRealtimeContactAnalysisSegmentsPaginator {
            crate::paginator::ListRealtimeContactAnalysisSegmentsPaginator::new(
                self.handle,
                self.inner,
            )
        }
        /// <p>The identifier of the Amazon Connect instance.</p>
        pub fn instance_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.instance_id(input.into());
            self
        }
        /// <p>The identifier of the Amazon Connect instance.</p>
        pub fn set_instance_id(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_instance_id(input);
            self
        }
        /// <p>The identifier of the contact.</p>
        pub fn contact_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.contact_id(input.into());
            self
        }
        /// <p>The identifier of the contact.</p>
        pub fn set_contact_id(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_contact_id(input);
            self
        }
        /// <p>The maximimum number of results to return per page.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximimum number of results to return per page.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
    }
}

impl Client {
    /// Creates a client with the given service config and connector override.
    pub fn from_conf_conn<C, E>(conf: crate::Config, conn: C) -> Self
    where
        C: aws_smithy_client::bounds::SmithyConnector<Error = E> + Send + 'static,
        E: Into<aws_smithy_http::result::ConnectorError>,
    {
        let retry_config = conf.retry_config.as_ref().cloned().unwrap_or_default();
        let timeout_config = conf.timeout_config.as_ref().cloned().unwrap_or_default();
        let sleep_impl = conf.sleep_impl.clone();
        let mut builder = aws_smithy_client::Builder::new()
            .connector(aws_smithy_client::erase::DynConnector::new(conn))
            .middleware(aws_smithy_client::erase::DynMiddleware::new(
                crate::middleware::DefaultMiddleware::new(),
            ));
        builder.set_retry_config(retry_config.into());
        builder.set_timeout_config(timeout_config);
        if let Some(sleep_impl) = sleep_impl {
            builder.set_sleep_impl(Some(sleep_impl));
        }
        let client = builder.build();
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }

    /// Creates a new client from a shared config.
    #[cfg(any(feature = "rustls", feature = "native-tls"))]
    pub fn new(sdk_config: &aws_types::sdk_config::SdkConfig) -> Self {
        Self::from_conf(sdk_config.into())
    }

    /// Creates a new client from the service [`Config`](crate::Config).
    #[cfg(any(feature = "rustls", feature = "native-tls"))]
    pub fn from_conf(conf: crate::Config) -> Self {
        let retry_config = conf.retry_config.as_ref().cloned().unwrap_or_default();
        let timeout_config = conf.timeout_config.as_ref().cloned().unwrap_or_default();
        let sleep_impl = conf.sleep_impl.clone();
        let mut builder = aws_smithy_client::Builder::dyn_https().middleware(
            aws_smithy_client::erase::DynMiddleware::new(
                crate::middleware::DefaultMiddleware::new(),
            ),
        );
        builder.set_retry_config(retry_config.into());
        builder.set_timeout_config(timeout_config);
        // the builder maintains a try-state. To avoid suppressing the warning when sleep is unset,
        // only set it if we actually have a sleep impl.
        if let Some(sleep_impl) = sleep_impl {
            builder.set_sleep_impl(Some(sleep_impl));
        }
        let client = builder.build();

        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }
}