// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::list_virtual_nodes::_list_virtual_nodes_input::ListVirtualNodesInputBuilder;
pub use crate::operation::list_virtual_nodes::_list_virtual_nodes_output::ListVirtualNodesOutputBuilder;
impl crate::operation::list_virtual_nodes::builders::ListVirtualNodesInputBuilder {
/// Sends a request with this input using the given client.
pub async fn send_with(
self,
client: &crate::Client,
) -> ::std::result::Result<
crate::operation::list_virtual_nodes::ListVirtualNodesOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::list_virtual_nodes::ListVirtualNodesError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let mut fluent_builder = client.list_virtual_nodes();
fluent_builder.inner = self;
fluent_builder.send().await
}
}
/// Fluent builder constructing a request to `ListVirtualNodes`.
///
/// <p>Returns a list of existing virtual nodes.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct ListVirtualNodesFluentBuilder {
handle: ::std::sync::Arc<crate::client::Handle>,
inner: crate::operation::list_virtual_nodes::builders::ListVirtualNodesInputBuilder,
config_override: ::std::option::Option<crate::config::Builder>,
}
impl
crate::client::customize::internal::CustomizableSend<
crate::operation::list_virtual_nodes::ListVirtualNodesOutput,
crate::operation::list_virtual_nodes::ListVirtualNodesError,
> for ListVirtualNodesFluentBuilder
{
fn send(
self,
config_override: crate::config::Builder,
) -> crate::client::customize::internal::BoxFuture<
crate::client::customize::internal::SendResult<
crate::operation::list_virtual_nodes::ListVirtualNodesOutput,
crate::operation::list_virtual_nodes::ListVirtualNodesError,
>,
> {
::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
}
}
impl ListVirtualNodesFluentBuilder {
/// Creates a new `ListVirtualNodesFluentBuilder`.
pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
Self {
handle,
inner: ::std::default::Default::default(),
config_override: ::std::option::Option::None,
}
}
/// Access the ListVirtualNodes as a reference.
pub fn as_input(&self) -> &crate::operation::list_virtual_nodes::builders::ListVirtualNodesInputBuilder {
&self.inner
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> ::std::result::Result<
crate::operation::list_virtual_nodes::ListVirtualNodesOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::list_virtual_nodes::ListVirtualNodesError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let input = self
.inner
.build()
.map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
let runtime_plugins = crate::operation::list_virtual_nodes::ListVirtualNodes::operation_runtime_plugins(
self.handle.runtime_plugins.clone(),
&self.handle.conf,
self.config_override,
);
crate::operation::list_virtual_nodes::ListVirtualNodes::orchestrate(&runtime_plugins, input).await
}
/// Consumes this builder, creating a customizable operation that can be modified before being sent.
pub fn customize(
self,
) -> crate::client::customize::CustomizableOperation<
crate::operation::list_virtual_nodes::ListVirtualNodesOutput,
crate::operation::list_virtual_nodes::ListVirtualNodesError,
Self,
> {
crate::client::customize::CustomizableOperation::new(self)
}
pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
self.set_config_override(::std::option::Option::Some(config_override.into()));
self
}
pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
self.config_override = config_override;
self
}
/// Create a paginator for this request
///
/// Paginators are used by calling [`send().await`](crate::operation::list_virtual_nodes::paginator::ListVirtualNodesPaginator::send) which returns a [`PaginationStream`](aws_smithy_async::future::pagination_stream::PaginationStream).
pub fn into_paginator(self) -> crate::operation::list_virtual_nodes::paginator::ListVirtualNodesPaginator {
crate::operation::list_virtual_nodes::paginator::ListVirtualNodesPaginator::new(self.handle, self.inner)
}
/// <p>The name of the service mesh to list virtual nodes in.</p>
pub fn mesh_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.mesh_name(input.into());
self
}
/// <p>The name of the service mesh to list virtual nodes in.</p>
pub fn set_mesh_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_mesh_name(input);
self
}
/// <p>The name of the service mesh to list virtual nodes in.</p>
pub fn get_mesh_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_mesh_name()
}
/// <p>The <code>nextToken</code> value returned from a previous paginated <code>ListVirtualNodes</code> request where <code>limit</code> was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the <code>nextToken</code> value.</p>
pub fn next_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.next_token(input.into());
self
}
/// <p>The <code>nextToken</code> value returned from a previous paginated <code>ListVirtualNodes</code> request where <code>limit</code> was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the <code>nextToken</code> value.</p>
pub fn set_next_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_next_token(input);
self
}
/// <p>The <code>nextToken</code> value returned from a previous paginated <code>ListVirtualNodes</code> request where <code>limit</code> was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the <code>nextToken</code> value.</p>
pub fn get_next_token(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_next_token()
}
/// <p>The maximum number of results returned by <code>ListVirtualNodes</code> in paginated output. When you use this parameter, <code>ListVirtualNodes</code> returns only <code>limit</code> results in a single page along with a <code>nextToken</code> response element. You can see the remaining results of the initial request by sending another <code>ListVirtualNodes</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If you don't use this parameter, <code>ListVirtualNodes</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn limit(mut self, input: i32) -> Self {
self.inner = self.inner.limit(input);
self
}
/// <p>The maximum number of results returned by <code>ListVirtualNodes</code> in paginated output. When you use this parameter, <code>ListVirtualNodes</code> returns only <code>limit</code> results in a single page along with a <code>nextToken</code> response element. You can see the remaining results of the initial request by sending another <code>ListVirtualNodes</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If you don't use this parameter, <code>ListVirtualNodes</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn set_limit(mut self, input: ::std::option::Option<i32>) -> Self {
self.inner = self.inner.set_limit(input);
self
}
/// <p>The maximum number of results returned by <code>ListVirtualNodes</code> in paginated output. When you use this parameter, <code>ListVirtualNodes</code> returns only <code>limit</code> results in a single page along with a <code>nextToken</code> response element. You can see the remaining results of the initial request by sending another <code>ListVirtualNodes</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If you don't use this parameter, <code>ListVirtualNodes</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
pub fn get_limit(&self) -> &::std::option::Option<i32> {
self.inner.get_limit()
}
/// <p>The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see <a href="https://docs.aws.amazon.com/app-mesh/latest/userguide/sharing.html">Working with shared meshes</a>.</p>
pub fn mesh_owner(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.mesh_owner(input.into());
self
}
/// <p>The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see <a href="https://docs.aws.amazon.com/app-mesh/latest/userguide/sharing.html">Working with shared meshes</a>.</p>
pub fn set_mesh_owner(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_mesh_owner(input);
self
}
/// <p>The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see <a href="https://docs.aws.amazon.com/app-mesh/latest/userguide/sharing.html">Working with shared meshes</a>.</p>
pub fn get_mesh_owner(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_mesh_owner()
}
}