Arduino MKR Vidor 4000 Board Support Crate
This crate provides a type-safe API for working with the Arduino MKR Vidor board.
Examples
Blinky Basic
Requirements
- Arduino IDE installed
- samd package installed
- Now the arduino distribution contains bossac.exe in
ArduinoData/packages/arduino/tools/bossac/1.7.0/
add it to your path - Probably best to install an example sketch via the IDE just to make sure everything is working
- Note that the arduino cli (or just regular bossac) may soon replace this section
- arm-none-eabi tools installed, you need gcc and objcopy.
- thumbv6m-none-eabi rust target installed via
rustup target add thumbv6m-none-eabi
Steps
Then, press the reset button twice quickly on the board. The red LED should be fading in and out. Now you can flash the board.