Module cc3220sf::gpioa2::den

0x4000 551C 0x4000 651C 0x4000 751C 0x4002 451C GPIO Digital Enable (GPIODEN)@@ offset 0x51C Note: Pins configured as digital inputs are Schmitt-triggered. The GPIODEN register is the digital enable register. By default@@ all GPIO signals except those listed below are configured out of reset to be undriven (tristate). Their digital function is disabled; they do not drive a logic value on the pin and they do not allow the pin voltage into the GPIO receiver. To use the pin as a digital input or output (either GPIO or alternate function)@@ the corresponding GPIODEN bit must be set.

Type Definitions

R	Reader of register DEN
W	Writer for register DEN