1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246
#[doc = r" Value read from the register"] pub struct R { bits: u32, } impl super::FR { #[doc = r" Reads the contents of the register"] #[inline] pub fn read(&self) -> R { R { bits: self.register.get() } } } #[doc = r" Value of the field"] pub struct RESERVED1R { bits: u32, } impl RESERVED1R { #[doc = r" Value of the field as raw bits"] #[inline] pub fn bits(&self) -> u32 { self.bits } } #[doc = r" Value of the field"] pub struct TXFER { bits: bool, } impl TXFER { #[doc = r" Value of the field as raw bits"] #[inline] pub fn bit(&self) -> bool { self.bits } #[doc = r" Returns `true` if the bit is clear (0)"] #[inline] pub fn bit_is_clear(&self) -> bool { !self.bit() } #[doc = r" Returns `true` if the bit is set (1)"] #[inline] pub fn bit_is_set(&self) -> bool { self.bit() } } #[doc = r" Value of the field"] pub struct RXFFR { bits: bool, } impl RXFFR { #[doc = r" Value of the field as raw bits"] #[inline] pub fn bit(&self) -> bool { self.bits } #[doc = r" Returns `true` if the bit is clear (0)"] #[inline] pub fn bit_is_clear(&self) -> bool { !self.bit() } #[doc = r" Returns `true` if the bit is set (1)"] #[inline] pub fn bit_is_set(&self) -> bool { self.bit() } } #[doc = r" Value of the field"] pub struct TXFFR { bits: bool, } impl TXFFR { #[doc = r" Value of the field as raw bits"] #[inline] pub fn bit(&self) -> bool { self.bits } #[doc = r" Returns `true` if the bit is clear (0)"] #[inline] pub fn bit_is_clear(&self) -> bool { !self.bit() } #[doc = r" Returns `true` if the bit is set (1)"] #[inline] pub fn bit_is_set(&self) -> bool { self.bit() } } #[doc = r" Value of the field"] pub struct RXFER { bits: bool, } impl RXFER { #[doc = r" Value of the field as raw bits"] #[inline] pub fn bit(&self) -> bool { self.bits } #[doc = r" Returns `true` if the bit is clear (0)"] #[inline] pub fn bit_is_clear(&self) -> bool { !self.bit() } #[doc = r" Returns `true` if the bit is set (1)"] #[inline] pub fn bit_is_set(&self) -> bool { self.bit() } } #[doc = r" Value of the field"] pub struct BUSYR { bits: bool, } impl BUSYR { #[doc = r" Value of the field as raw bits"] #[inline] pub fn bit(&self) -> bool { self.bits } #[doc = r" Returns `true` if the bit is clear (0)"] #[inline] pub fn bit_is_clear(&self) -> bool { !self.bit() } #[doc = r" Returns `true` if the bit is set (1)"] #[inline] pub fn bit_is_set(&self) -> bool { self.bit() } } #[doc = r" Value of the field"] pub struct RESERVED0R { bits: u8, } impl RESERVED0R { #[doc = r" Value of the field as raw bits"] #[inline] pub fn bits(&self) -> u8 { self.bits } } #[doc = r" Value of the field"] pub struct CTSR { bits: bool, } impl CTSR { #[doc = r" Value of the field as raw bits"] #[inline] pub fn bit(&self) -> bool { self.bits } #[doc = r" Returns `true` if the bit is clear (0)"] #[inline] pub fn bit_is_clear(&self) -> bool { !self.bit() } #[doc = r" Returns `true` if the bit is set (1)"] #[inline] pub fn bit_is_set(&self) -> bool { self.bit() } } impl R { #[doc = r" Value of the register as raw bits"] #[inline] pub fn bits(&self) -> u32 { self.bits } #[doc = "Bits 8:31 - Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."] #[inline] pub fn reserved1(&self) -> RESERVED1R { let bits = { const MASK: u32 = 16777215; const OFFSET: u8 = 8; ((self.bits >> OFFSET) & MASK as u32) as u32 }; RESERVED1R { bits } } #[doc = "Bit 7 - UART Transmit FIFO Empty: The meaning of this bit depends on the state of LCRH.FEN . - If the FIFO is disabled, this bit is set when the transmit holding register is empty. - If the FIFO is enabled, this bit is set when the transmit FIFO is empty. This bit does not indicate if there is data in the transmit shift register."] #[inline] pub fn txfe(&self) -> TXFER { let bits = { const MASK: bool = true; const OFFSET: u8 = 7; ((self.bits >> OFFSET) & MASK as u32) != 0 }; TXFER { bits } } #[doc = "Bit 6 - UART Receive FIFO Full: The meaning of this bit depends on the state of LCRH.FEN. - If the FIFO is disabled, this bit is set when the receive holding register is full. - If the FIFO is enabled, this bit is set when the receive FIFO is full."] #[inline] pub fn rxff(&self) -> RXFFR { let bits = { const MASK: bool = true; const OFFSET: u8 = 6; ((self.bits >> OFFSET) & MASK as u32) != 0 }; RXFFR { bits } } #[doc = "Bit 5 - UART Transmit FIFO Full: Transmit FIFO full. The meaning of this bit depends on the state of LCRH.FEN. - If the FIFO is disabled, this bit is set when the transmit holding register is full. - If the FIFO is enabled, this bit is set when the transmit FIFO is full."] #[inline] pub fn txff(&self) -> TXFFR { let bits = { const MASK: bool = true; const OFFSET: u8 = 5; ((self.bits >> OFFSET) & MASK as u32) != 0 }; TXFFR { bits } } #[doc = "Bit 4 - UART Receive FIFO Empty: Receive FIFO empty. The meaning of this bit depends on the state of LCRH.FEN. - If the FIFO is disabled, this bit is set when the receive holding register is empty. - If the FIFO is enabled, this bit is set when the receive FIFO is empty."] #[inline] pub fn rxfe(&self) -> RXFER { let bits = { const MASK: bool = true; const OFFSET: u8 = 4; ((self.bits >> OFFSET) & MASK as u32) != 0 }; RXFER { bits } } #[doc = "Bit 3 - UART Busy: If this bit is set to 1, the UART is busy transmitting data. This bit remains set until the complete byte, including all the stop bits, has been sent from the shift register. This bit is set as soon as the transmit FIFO becomes non-empty, regardless of whether the UART is enabled or not."] #[inline] pub fn busy(&self) -> BUSYR { let bits = { const MASK: bool = true; const OFFSET: u8 = 3; ((self.bits >> OFFSET) & MASK as u32) != 0 }; BUSYR { bits } } #[doc = "Bits 1:2 - Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."] #[inline] pub fn reserved0(&self) -> RESERVED0R { let bits = { const MASK: u8 = 3; const OFFSET: u8 = 1; ((self.bits >> OFFSET) & MASK as u32) as u8 }; RESERVED0R { bits } } #[doc = "Bit 0 - Clear To Send: This bit is the complement of the active-low UART CTS input pin. That is, the bit is 1 when CTS input pin is LOW."] #[inline] pub fn cts(&self) -> CTSR { let bits = { const MASK: bool = true; const OFFSET: u8 = 0; ((self.bits >> OFFSET) & MASK as u32) != 0 }; CTSR { bits } } }